SmartPSS/Add Device P2P

From Dahua Wiki

Jump to: navigation, search

Setup Remote Access via P2P using SmartPSS

Description

This allows you to view cameras on SmartPSS using P2P.

Prerequisites

  • SmartPSS
    SmartPSS Download
    How to Install SmartPSS
  • SN Number of device located on bottom of device recorder. Can also be located from the local menu of the recorder under menu -> system info or from Dahua Web service under Setup -> Network -> P2P
  • P2P must be enabled from the main menu of the recorder under Settings -> Network -> P2P or from Dahua Web Service under Setup -> Network -> P2P.

Video Instructions

Step by Step Instructions

1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:

  • On the underside or side of the unit

SmartPSSP2P3.JPG

  • In the web interface, under Info->Version

SmartPSSP2P1.png

  • On the system interface under Main Menu->Settings->Network->P2P

SmartPSSP2P4.png

  • On the system interface under Main Menu->Info->System->Version

SmartPSSP2P5.png

2. Launch SmartPSS. (Default SmartPSS credentials are admin:admin)

SmartPSSP2P6.png

3. Click, "Devices"

SmartPSSP2P7.png

4. Click, "Manual Add"

SmartPSSP2P8.png

5. Input the following:

  • Device Name:(Any Name)
  • Register Mode: SN
  • SN: (Your Device's Serial)
  • Group Name: (Any Group)
  • User Name: admin
  • Password: admin (Your NVR's Password)

SmartPSSP2P9.png

6. Click, "Get Info"

SmartPSSP2P10.png

7. Click, "Save and Continue"

SmartPSSP2P11.png

8. After a few moments, SmartPSS will connect to the NVR and display as, "Online"

SmartPSSP2P12.png


Links

Related Articles in Category:SmartPSS

Extension:DynamicPageList (DPL), version 3.0.11: Error: No results!

Extension:DynamicPageList (DPL), version 3.0.11: Error: No results!

Related Articles in Category:P2P

Extension:DynamicPageList (DPL), version 3.0.11: Error: No results!