Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Access Control/How To Setup DHI ASM100"
| Line 11: | Line 11: | ||
===Step by Step Instructions=== | ===Step by Step Instructions=== | ||
1. | 1. | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | A - User ID: | ||
| + | Upper and lower case letters and numbers allowed, but no spaces. | ||
| + | |||
| + | B - Name: | ||
| + | Upper and lower case letters, numbers, spaces allowed. | ||
| + | |||
| + | C - Card No.: | ||
| + | this will be inputted with the card reader | ||
| + | |||
| + | D - Card Type: | ||
| + | IC Card - | ||
| + | Geberak Card - 13.65 mhz mifare | ||
Revision as of 01:04, 18 July 2017
Contents
How To Setup DHI-ASM100
Description
This step by step guide will run through the use of DHI-ASM100 with SmartPSS 1.16.1's access control section to assist in assigning 13.56 MHz MIFARE cards.
Prerequisites
- Windows 10 PC
-
SmartPSS 1.16.1 - DHI-ASM100
- DHI-ASC1204B/ASC1204C added to SmartPSS1.16.1
Video Instructions
Step by Step Instructions
1.
A - User ID: Upper and lower case letters and numbers allowed, but no spaces.
B - Name: Upper and lower case letters, numbers, spaces allowed.
C - Card No.: this will be inputted with the card reader
D - Card Type: IC Card - Geberak Card - 13.65 mhz mifare
