Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Difference between revisions of "SmartPSS/Add Device P2P"

(→‎Step by Step Instructions)
Line 30: Line 30:
  
 
<gallery>
 
<gallery>
−
file:SmartPSSP2P3.JPG|Configure a intrusion rule along obvious perimeters, such as a plants/trees.
+
file:SmartPSSP2P3.JPG|On the underside or side of the unit
−
file:SmartPSSP2P1.png|Configure a intrusion rule along obvious perimeters, such as lawns and lakes.
+
file:SmartPSSP2P1.png|In the web interface, under Info->Version
−
file:SmartPSSP2P4.png|Install cameras at a high position perpendicular to the road to monitor humans and vehicles.
+
file:SmartPSSP2P4.png|On the system interface under Main Menu->Settings->Network->P2P
−
file:SmartPSSP2P5.png|Install cameras at park or garage entrances to detect humans who goes into the motorway or vehicles which goes into a pedestrian area
+
file:SmartPSSP2P5.png|On the system interface under Main Menu->Info->System->Version
 
</gallery>
 
</gallery>
  

Revision as of 17:25, 16 October 2019

Setup Remote Access via P2P using SmartPSS

Description

This allows you to view cameras on SmartPSS using P2P.

Prerequisites

  • SmartPSS
    SmartPSS Download
    How to Install SmartPSS
  • SN Number of device located on bottom of device recorder. Can also be located from the local menu of the recorder under menu -> system info or from Dahua Web service under Setup -> Network -> P2P
  • P2P must be enabled from the main menu of the recorder under Settings -> Network -> P2P or from Dahua Web Service under Setup -> Network -> P2P.

Video Instructions

Step by Step Instructions

1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:

  • On the underside or side of the unit

SmartPSSP2P3.JPG

  • In the web interface, under Info->Version

SmartPSSP2P1.png

  • On the system interface under Main Menu->Settings->Network->P2P

SmartPSSP2P4.png

  • On the system interface under Main Menu->Info->System->Version

SmartPSSP2P5.png

  • On the underside or side of the unit

  • In the web interface, under Info->Version

  • On the system interface under Main Menu->Settings->Network->P2P

  • On the system interface under Main Menu->Info->System->Version


2. Launch SmartPSS. At the main page click Devices

How To Add Device P2P - SmartPSS - 1.jpg

How To Add Device P2P - SmartPSS - 2.jpg

How To Add Device P2P - SmartPSS - 3.jpg

How To Add Device P2P - SmartPSS - 4.jpg

How To Add Device P2P - SmartPSS - 5.jpg

How To Add Device P2P - SmartPSS - 6.jpg

How To Add Device P2P - SmartPSS - 7.jpg

How To Add Device P2P - SmartPSS - 8.jpg















2. Launch SmartPSS. (Default SmartPSS credentials are admin:admin)

SmartPSSP2P6.png

3. Click, "Devices"

SmartPSSP2P7.png

4. Click, "Manual Add"

SmartPSSP2P8.png

5. Input the following:

  • Device Name:(Any Name)
  • Register Mode: SN
  • SN: (Your Device's Serial)
  • Group Name: (Any Group)
  • User Name: admin
  • Password: admin (Your NVR's Password)

SmartPSSP2P9.png

6. Click, "Get Info"

SmartPSSP2P10.png

7. Click, "Save and Continue"

SmartPSSP2P11.png

8. After a few moments, SmartPSS will connect to the NVR and display as, "Online"

SmartPSSP2P12.png

Links

Related Articles in Category:SmartPSS
<DynamicPageList>

category = SmartPSS count=5 </DynamicPageList>

<DynamicPageList> category = SmartPSS offset = 5 count= 5 </DynamicPageList>

<DynamicPageList>

category = SmartPSS offset = 10 count=5 </DynamicPageList>

Related Articles in Category:P2P
<DynamicPageList>

category = P2P count=5 </DynamicPageList>

Retrieved from "https://DahuaWiki.com/index.php?title=SmartPSS/Add_Device_P2P&oldid=48644"