Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "CMS/DSS/Server Main-Sub"
Norman.Ning (talk | contribs) (Created page with "==Descriptions== DSS All-in-one supports Main-sub Mode which allows you to create a DSS Cluster. Compared to a single DSS All-in-one, Main-sub mode is better in terms of Devic...") |
(No difference)
|
Revision as of 06:22, 21 December 2022
Descriptions
DSS All-in-one supports Main-sub Mode which allows you to create a DSS Cluster. Compared to a single DSS All-in-one, Main-sub mode is better in terms of Device Access Capability, Bandwidth, and System Redundancy, etc.
This document will walk you through the process of configuring DSS Main-sub Mode.
Prerequisites
- At least 2 DSS4004s or DSS7016s
- Make sure that all your DSS All-in-ones are of the same version.
Step by Step Instructions
