Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

SmartPSS/Add Device P2P

Revision as of 00:08, 15 December 2015 by JP (talk | contribs)

Setup Remote Access via P2P using SmartPSS

1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:

  • On the underside or side of the unit

SmartPSSP2P3.JPG

  • In the web interface, under Info->Version

SmartPSSP2P1.png

  • On the system interface under Main Menu->Settings->Network->P2P

SmartPSSP2P4.png

  • On the system interface under Main Menu->Info->System->Version

SmartPSSP2P5.png

2. Launch SmartPSS. (Default SmartPSS credentials are admin:admin)

SmartPSSP2P6.png

3.

Retrieved from "https://DahuaWiki.com/index.php?title=SmartPSS/Add_Device_P2P&oldid=4056"