DSS S2/Manager/System Parameters

How To Set System Parameters In DSS Manager Portal

Description

This article will show you how to set system parameters in the DSS Manager Portal

Prerequisites

• DSS
• Computer connected to the same local network / network segment as the server. The default IP address of the server is 192.168.1.108

Video Instructions

Coming Soon

Step by Step Instructions

1. Open a web browser and enter the IP address of the server. Enter the username/password and click Login

2. Click + , then select System

3. Click System

3. The system parameters will be displayed

Parameter Description Message Storage Time Setup Log Sets longest keep time of log, it is 30 days by default. Alarm Info Sets the longest keep time of alarm info, it is 30 days by default. GPS Info Sets the longest keep time of GPS info, it is 30 days by default. POS Sets the longest keep time of POS info, it is 30 days by default. Face Recognition Sets the longest keep time of face recognition info; it is 180 days by default. Passed Vehicle Record Sets the longest keep time of passed vehicle record; it is 180 days by default. Access Snapshot Device Sets the longest keep time of entrance snapshot record. Customer Analysis Sets the longest keep time of people flow statistics record. Time Sync Enable Check it to enable the function of time sync. Start Time Sets start time of time sync. Sync Interval The time of server shall prevail; synchronize the time of device and server. It is 2 hours by default, the system is based on the server time every 2 hours, and then it is to synchronize the time of both device and server. The time between device and server is synchronized via SDK. Immediately Click the button to start time sync immediately. Manager Operations 25 Parameter Description Mail Server – Set mail server IP, port, encryption type, username/password, sender and test recipient. Select to send email to users when the administrator configures the alarm linkage and the client handles the alarm. At this moment, it needs to configure mail server first. Activity Directory – Set domain info. POS End – After setting POS end mark, it will display on the location of POS receipts end. Step 2 Configure corresponding parameters.