:People Flow Control

People Flow Control

Description

These instructions will show how to setup the People Flow Control feature at the NVR's WebUI

For instructions on how to enable and use the People Flow Control at the NVR use the following link:

How To Enable and Use Flow Control With the NVR

Prerequisites

• DHI-NVR5216-16P-I with latest firmware Thermal firmware
• Camera added to NVR
• NVR configured and setup on network
• Local computer

Step by Step Instructions

Setup People Counting

1. Enter the IP address of the NVR into Internet Explorer

Enter the username/password for the device

Click Login

2. Click Management > Camera

3. Under the Camera Registration list, confirm the Channel # the N45EJ62 is added as. In this example it is Channel 1

4. From the Main Menu

Select AI

5. Select Parameters > Smart Plan

6. Use the dropdown box to select the channel

Click to select the People Counting feature

Click OK to save

7. Select People Counting

8. Click the + to add a new People Counting rule

9. Click Draw Area to draw the detection zone for the People Counting

Left click inside the image to begin drawing the Area

Drag and left click to create a complete object

Complete

People Counting Alarm

Adjust parameters as desired for alarm events:

• Enter No.
• Exit No.
• Strand No.

Click More Setting

For additional options for output when a people counting alarm is triggered

Click Draw Rule to draw the line which people need to cross to trigger the People Counting feature

The direction of the arrow on this line will determine the direction of Enter / Exit that is counted

Left click and drag down to create a left facing arrow

Left click and drag up to create a right facing arrow

Click OK to save

Setup Queuing

1. Select the Queuing tab

Click the + to create a new rule

2. Check the box to enable

Enter a value in the Queue People No. field

3. Click Draw Area

4. Left click and drag to draw the detection area

5. Click OK to save

Setup People Flow Control

1. Select the People Flow Control tab

2. The parameters here determine what will trigger an alarm event for People Flow Control

Click the Setting button to select the channel to display On Screen Statistics (green People Counting statistics overlay)

3. Select the channel

Click OK to save

4. The alarm is triggered when the number of people staying in the area is greater than the Threshold value

5. By default the On Screen Display statistics will automatically clear:

• When the device is rebooted
• When the system time passes to next day (0:00 am)

Set a custom time for clearing the OSD statistics by modifying the Num Auto-Clear Time field

6. Click OK to save all settings

Both rules configured and displayed at Live View on WebUI of NVR: