DSS S2/User Portal/Add Device Manually

Revision as of 14:00, 14 June 2019 by JP (talk | contribs) (Created page with "==How To Add Device Manually In DSS Manager Portal== ===Description=== This article will show you how to add a device manually in the DSS Manager Portal. Devices on the same...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How To Add Device Manually In DSS Manager Portal

Description

This article will show you how to add a device manually in the DSS Manager Portal.

Devices on the same LAN as the server can be added this way.

To automatically add local devices to DSS use the corresponding guide: How To Add Device In DSS Manager Portal


Prerequisites

Video Instructions

Coming Soon

Step by Step Instructions

1. Open a web browser and enter the IP address of the server. Enter the username/password and click Login

Login Manager Portal - 1.jpg

2. Click Device

Add Device - Manager DSS - 1.jpg

3. Click Add

Add Device Manually - Manager DSS - 1.jpg

4. Login information must be entered

Add Device Manually - Manager DSS - 2.jpg

Select

Add Type

  • IP Address - enter device IP address
  • IP Section - enter a range of IP addresses to add
  • Auto Register - Auto register only works with encoders and uses the ID to automatically register with the server
  • Domain Name - add devices from a domain that was configured during deployment

Once all login information has been entered

Click Add

5. Device information must be entered

Add Device Manually - Manager DSS - 3.jpg

Select

Add Type - IP Address, Auto Register, Domain Name

Once all device information has been entered


Click 'Continue to add' to add additional devices

Click OK to finish adding devices