Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

IPCSystemPTZ

PTZ

IPCSystemPTZ.jpg

Parameter

Function

Protocol

Select the corresponding dome protocol.

Address

Set corresponding dome address. Default value is 1.

Please note your setup here shall comply with your dome address; otherwise you cannot control the speed dome.

Baud Rate

Select the dome baud rate. Default setup is 9600.

Data Bit

Default setup is 8.

Stop bit

Default setup is 1.

Parity

Default setup is none.