Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
POS
Point of Sales
Supported POS
1. Comcash via IP
2. JMSC via IP
Instructions
Step by Step Instructions
1. Under System select POS -> Select Add.
2. Check off box to Enable POS function and click on Set up.
3. Input source IP (IP of POS system) Default port is 37777 -> Input Destination IP (IP of NVR/DVR) Default port is 38880.
- Please note: Source IP is IP address of POS system or UT-6602C and connection is the port you have chosen for POS system or UT-6602C.
4. Click on "Channel Set" -> Select camera that is to view the transaction -> Click OK to save settings.