-
==How to Access a Device via iPad and P2P==
2. Go to Device Manager.
632 bytes (111 words) - 23:07, 9 June 2016
-
==How to Access a Device via iPad and IP==
7. Tap on the camera/device to enter full screen.
634 bytes (96 words) - 23:07, 9 June 2016
-
==How to Playback Video iPad==
1. From the Live View page tap on the top left hand corner. This bring you to the home page.
908 bytes (150 words) - 23:06, 9 June 2016
-
==How to Setup Privacy Mask on NVR==
This is a guide for how to set up Privacy Mask on the NVR using browser.
941 bytes (127 words) - 23:13, 18 March 2021
-
290 bytes (26 words) - 20:01, 25 August 2016
-
...mera where you can set an interval of idle time before the camera defaults to one of the following: Preset, Scan, Tour, or Pattern. The intended PTZ idle
* Access to the OSD or Access to the login via Internet Explorer
2 KB (312 words) - 18:16, 23 November 2016
-
==How to Add a Hikvision Camera to a Dahua NVR==
...IF must be enabled on the Hikvision camera before trying to add the device to a Dahua recorder.
3 KB (370 words) - 19:11, 18 August 2020
-
==How to Add an Axis Camera to a Dahua NVR==
This article will go over how to add an Axis IP Camera to a Dahua DVR or NVR.
2 KB (367 words) - 00:15, 18 February 2017
-
==How to Add a Hikvision Camera to DSS==
The below instructions will show you show to add a Hikvision IP Camera to a Dahua DSS server, that is on the same Local Area Network, or LAN.
2 KB (288 words) - 00:14, 18 February 2017
-
==How To Enable H.264==
...To resolve this issue please follow the steps below to set your IP Camera to the H.264 codec.
1 KB (179 words) - 20:27, 21 February 2017
-
==How To Add A VTH1550CH To A VTO1210C-X==
This Step by Step guide will provide instruction to setup A VTH1550CH To A VTO1210C-X via a LAN connection.
3 KB (444 words) - 19:50, 20 November 2019
-
#REDIRECT [[Video Intercom/How To Add A VTH1550CH To A VTO1210C-X]]
67 bytes (13 words) - 17:50, 27 January 2017
-
==How To Add A VTO2111D-WP To a VTH5221D==
This Step by Step guide will provide instruction to setup A VTO2111D-WP To A VTH5221D via a LAN and Wireless LAN connection.
11 KB (1,995 words) - 19:53, 20 November 2019
-
==How To Add A Second VTH1550CH To A VTO1210C-X==
This Step by Step guide will provide instruction to setup A Second VTH1550CH To A VTH5221D via a LAN connection.
3 KB (444 words) - 20:04, 20 November 2019
-
==How To Add A VTH1660CH To A VTO1210C-X==
This Step by Step guide will provide instruction to setup A VTH1660CH To A VTO1210C-X via a LAN connection.
5 KB (886 words) - 20:05, 20 November 2019
-
==How to Terminate CAT5==
These instructions will show you how to properly terminate a Cat5 cable, and verify that that cable is working prop
2 KB (320 words) - 22:10, 20 November 2017
-
==How to Terminate RG59==
These instructions will show you how to properly terminate a RG-6 cable with a BNC coaxial compression connector, a
4 KB (683 words) - 16:16, 2 August 2019
-
==How to add a Magnetic Lock to a VTO2111D-WP==
...ase read below for step by step instructions on how to add a magnetic lock to a VTO211D-WP
937 bytes (146 words) - 21:54, 20 November 2017
-
==How To Setup DHI-ASC1204B==
Follow the step by step instructions below to setup the DHI-ASC1204B four door access controller.
4 KB (554 words) - 22:53, 13 July 2017
-
==How To Setup DHI-ASI1212D==
Follow the step by step instructions below to setup the DHI-ASI1212D Water-proof Standalone Controller.
3 KB (544 words) - 18:02, 11 August 2017
-
==How To Setup DHI-ASM100==
...hrough the use of DHI-ASM100 with SmartPSS 1.16.1's access control section to assist in assigning 13.56 MHz MIFARE cards.
3 KB (455 words) - 19:56, 20 November 2017
-
=How to wire Magnetic lock to a Dahua Recorder=
This article will show you how to wire a magnetic door lock to Dahua Recorder. With this setup, you can use trigger the alarm output via M
459 bytes (72 words) - 18:46, 12 July 2018
-
...ol device using Wiegand protocol. The main objective is to connect devices to electronic entry systems via a specific protocol language.
...Card/ Key Fob, It is important to check the Card/ Key Fob frequency prior to your installation. Card/ Key Fob MUST be in a supported frequency, which is
2 KB (380 words) - 23:52, 10 July 2018
-
=How to default access controller unit=
This article to show you how to default the access controller unit to factory settings.
2 KB (223 words) - 19:56, 29 December 2020
-
=How to wire Card Reader via RS-485 protocol=
This article is to show how to wire Dahua Card Reader to Dahua Access Controller using RS-485 Protocol.
479 bytes (75 words) - 21:19, 28 July 2021
-
=How to wire an Exit Button or Sensor=
This wiring diagram is to describe where to wire door exit button/ Sensor to Dahua Access controller.
273 bytes (39 words) - 22:21, 23 July 2018
-
=How to Add a Digital Watchdog Camera to a Dahua Recorder=
This article will cover how to add a Digital Watchdog IP camera to a Dahua NVR, DVR, or XVR
2 KB (270 words) - 00:39, 26 September 2018
-
=How to Add a Arecont Camera to a Dahua Recorder=
276 bytes (37 words) - 19:43, 3 November 2020
-
=How to Add a Ganz Camera to a Dahua Recorder=
In this article we'll be showing you how to add a Ganz camera to our Dahua North America NVRs
1 KB (207 words) - 18:59, 8 October 2018
-
=How to Add a FLIR Camera to a Dahua Recorder=
This article will cover how to add a FLIR IP camera to a Dahua NVR, DVR, or XVR
2 KB (273 words) - 00:28, 30 October 2018
-
=How to Add an EmPower Camera to a Dahua Recorder=
This article will cover how to add a Unisight EmPower IP camera to a Dahua NVR, DVR, or XVR
3 KB (430 words) - 17:01, 15 October 2018
-
=How to Add a Bosch Camera to a Dahua Recorder=
This article will cover how to add a Bosch IP camera to a Dahua NVR, DVR, or XVR
2 KB (409 words) - 00:22, 1 November 2018
-
=How to Add a Night Owl Camera to a Dahua Recorder=
115 bytes (17 words) - 19:05, 19 October 2018
-
=How To Add A Wisenet Camera to A Dahua Recorder=
*Current device credentials to Wisenet camera
813 bytes (125 words) - 22:23, 19 November 2018
-
=How to Add an Vivotek Camera to a Dahua Recorder=
In this article we'll be showing you how to add a Vivotek camera to our Dahua North America NVRs.
601 bytes (88 words) - 19:43, 3 November 2020
-
==How To Use PTZ Preset In SmartPSS==
This article will show you how to setup and use PTZ Presets in SmartPSS 2.0
2 KB (249 words) - 16:29, 12 August 2019
-
==How To Use SmartPSS With Two Monitors==
This article will show you how to open SmartPSS on multiple monitors
1 KB (240 words) - 21:26, 8 August 2019
-
==How To Use PTZ Tour In SmartPSS==
This article will show you how to setup and use PTZ Tour in SmartPSS 2.0
2 KB (335 words) - 20:55, 8 August 2019
-
==How To Use PTZ Scan In SmartPSS==
This article will show you how to setup and use PTZ Scan in SmartPSS 2.0
2 KB (283 words) - 21:27, 8 August 2019
-
==How To Use PTZ Pattern In SmartPSS==
This article will show you how to setup and use PTZ Pattern in SmartPSS 2.0
2 KB (267 words) - 21:27, 8 August 2019
-
==How To Use PTZ Windshield Wiper In SmartPSS==
This article will show you how to setup and use PTZ Windshield Wiper in SmartPSS 2.0
1 KB (171 words) - 21:27, 8 August 2019
-
==How To Use Task Plan In SmartPSS==
...configure an automated sequence of video from multiple video devices added to SmartPSS using a wide array of customization options.
4 KB (742 words) - 21:27, 8 August 2019
-
==How To Enable Task In SmartPSS==
This article will show you how enable configured tours manually or by schedule using SmartPSS
2 KB (294 words) - 22:03, 7 December 2022
-
==How To Export Device Record In SmartPSS==
This article will show you how to export recordings from a device in SmartPSS 2.0
3 KB (487 words) - 21:28, 8 August 2019
-
==How To Export Device Picture In SmartPSS==
This article will show you how to export recorded pictures from a device in SmartPSS 2.0
3 KB (480 words) - 21:28, 8 August 2019
-
==How To Playback Local Record In SmartPSS==
...how to use the local record feature in SmartPSS 2.0, which allows the user to directly record and playback live video from an added device
2 KB (292 words) - 21:28, 8 August 2019
-
==How To Search Client Log In SmartPSS==
This article will show you how to search and review the local log in SmartPSS 2.0
1 KB (220 words) - 21:26, 8 August 2019
-
==How To Search Device Log In SmartPSS==
This article will show you how to search and review the device log in SmartPSS 2.0
1 KB (252 words) - 21:26, 8 August 2019
-
==How To Create Users In SmartPSS==
This article will show you how to create users and roles in SmartPSS 2.0
2 KB (317 words) - 21:28, 8 August 2019
-
==How To Setup Event Alarm Link In SmartPSS==
This article will show you how to setup the Event Alarm Link feature in SmartPSS 2.0
3 KB (545 words) - 18:52, 28 March 2019
-
* Current user has no right to monitor.
...Space|Need More Recording Space]] Wiki article for more information on how to optimize a camera feed.
2 KB (275 words) - 19:05, 17 August 2016
-
==How to create and install a certificate==
You will need to re-issue a certificate with the correct address, and then get the certifica
2 KB (361 words) - 19:18, 12 August 2016
-
* [[Troubleshoot/NVR/Browser_Troubleshoot | Unable to Log In from Browser]]
...Video_You_Have_No_Right_To_Operate|Failed to Open Video! You Have No Right To Operate!]]
10 KB (1,564 words) - 20:39, 7 December 2022
-
...unspecified power supply can result in damaging the IR lights in addition to the camera.
...r object. There are limitations of how far the IR can reach. Please refer to the specifications of the camera.
1 KB (250 words) - 15:48, 22 August 2016
-
|[[IPCamera/Change_Password_5.0_UI | How to Change the Password on a 5.0 UI IP Camera]]
|[[IPCamera/Set_Date_and_Time_5.0_UI | How to Set the Date and Time on a 5.0 UI IP Camera]]
5 KB (767 words) - 18:28, 21 November 2023
-
===How to Connect Camera to NVR===
1. You want to connect a CAT5 network cable to your IP camera.
431 bytes (66 words) - 22:10, 1 August 2019
-
===How to connect camera to LAN===
1. You want to connect a CAT5 network cable to your IP camera.
423 bytes (67 words) - 21:52, 9 March 2016
-
===How to Connect MicroSD Card===
How to install SD Card.
540 bytes (72 words) - 22:15, 6 August 2019
-
===How to Set Date and Time on an IP Camera===
Note: If your camera is connected to the back of an NVR, you do not need to set the date and time on each camera. The NVR will do that automatically.
599 bytes (97 words) - 19:26, 23 June 2023
-
==How to locate device on LAN via ConfigTool 3.20==
* How to locate and identify Dahua devices on LAN
1 KB (192 words) - 00:48, 17 February 2018
-
===How to Setup Remote Access for IP Camera===
Note: This setup is only for IP cameras that are not connected to the same LAN as the NVR or recording device.
1 KB (240 words) - 21:41, 26 June 2023
-
...ick the drop down box at the bottom of this window, and change the setting to, "Low"
* Security->Allow software to run or install even if the signature is invalid
2 KB (225 words) - 22:11, 1 August 2019
-
It is to set the image quality. There are six levels.
It is to set snapshot frequency. Optional1~7s/picture, customized.
662 bytes (85 words) - 22:12, 6 August 2019
-
...other device.You can use the browse of the Bonjour service in the same LAN to search the network camera device and then access if you do not know the net
[[OSX/Locate_Device_via_Bonjour| How to locate using Bonjour]]
794 bytes (129 words) - 00:34, 29 June 2016
-
==How To Setup People Counting==
Check to draw rule box for Flowrate statistics.
2 KB (216 words) - 16:30, 10 February 2017
-
Please ensure you have completed the, "[[IEConfig | How to Configure Internet Explorer's Security Settings]]" guide before proceeding
...ddress using the ConfigTool. Example: 172.16.16.99 [[ConfigToolLocate|Link to ConfigTool Instructions]]
642 bytes (79 words) - 04:21, 15 August 2016
-
...o surveillance. It manages IP cameras and recorders and is able to connect to third-party cameras via the standard ONVIF protocol.
*[[DSS/V8/DSS_Express/Instruction/Add_Device|Add device to DSS Express V8]]
14 KB (2,112 words) - 19:01, 5 January 2024
-
*[[NVR/Playback/Convert_DAV|How to Convert DAV to AVI]]
*[[Playback/Playback_DAV_File|How to Playback DAV File]]
796 bytes (111 words) - 19:33, 15 June 2023
-
* [[FAQ/Password_Reset_IPC_ConfigTool | How to reset Dahua IP Camera via ConfigTool]]
* [[ConfigTool/Firmware_Upgrade_via_ConfigTool|How to Update Firmware via ConfigTool]]
3 KB (362 words) - 17:02, 25 January 2024
-
===How to Set IP Camera to Static===
...ns will not apply. Please see, "[[ConnectIPCtoNVR|How to Connect IP Camera to NVR]]"
681 bytes (98 words) - 21:43, 26 June 2023
-
==How to Install SmartPSS==
This guide will show how to download and install SmartPSS
1 KB (206 words) - 18:21, 2 March 2021
-
===How to locate IP Camera on LAN via SmartPSS===
5. Click the check box to the left of your device, and click, "Add"
926 bytes (137 words) - 05:19, 30 June 2016
-
===How to access IP Camera from LAN via SmartPSS===
Note: Please be sure you have completed the, "[[SmartPSSLocate|How to locate and Add IP Camera on LAN via SmartPSS]]" guide before proceeding wit
610 bytes (89 words) - 05:17, 30 June 2016
-
===How to Configure IP Camera to Record to SD-Card===
...ia POE switch. You cannot login directly to an IP Camera that is connected to the back of the NVR.
881 bytes (125 words) - 23:04, 11 August 2016
-
==How to Playback Video from IP Camera==
This allows you to view playback of a IP Camera on the SD Card.
1 KB (169 words) - 19:52, 16 August 2016
-
===How to Backup Video from IP Camera that has an SD-Card Installed===
...ia POE switch. You cannot login directly to an IP Camera that is connected to the back of the NVR.
1 KB (171 words) - 23:14, 11 August 2016
-
==How to Configure SmartPSS to Record IP Camera Feed / PC-NVR Setup==
This enables you to allocate a storage space on your computer for IP Camera recordings.
2 KB (310 words) - 18:22, 2 March 2021
-
===How to Playback Video from SmartPSS===
...S <br/>[[Template:SmartPSS|SmartPSS Download]] <br/>[[InstallSmartPSS| How to Install SmartPSS]]
871 bytes (110 words) - 19:03, 4 November 2020
-
==How to setup NAS Storage==
...ra supports NAS which is only based on NFS, so there must be on NFS server to
1 KB (172 words) - 22:11, 6 August 2019
-
* [[MountCamera | How to mount camera]]
* [[ConnectIPCtoNVR | How to connect camera to NVR]]
9 KB (978 words) - 18:28, 14 June 2016
-
...curity cameras capable of 960H produce an image that is 960x480 compared to 702x480 for D1 and 352x240 for CIF.
: The ability of restriction access to certain areas.
16 KB (2,651 words) - 18:05, 15 August 2016
-
==Add DVR/NVR to SmartPSS(IP)==
This allows you to add and view NVR/HCVR to SmartPSS using IP address.
1 KB (163 words) - 16:15, 25 April 2017
-
[[Category:How To]]
154 bytes (20 words) - 22:17, 13 July 2016
-
[[Category:How To]]
154 bytes (20 words) - 20:35, 26 October 2021
-
==How to Modify Bit Rate Video==
126 bytes (17 words) - 19:38, 15 August 2016
-
==How to Add IP Camera to SmartPSS Video==
180 bytes (23 words) - 18:30, 9 March 2016
-
==How to set IP address for configuring IP cameras==
...amera or IP device. From here you can configure the settings of the camera to match that of your network recorder.
2 KB (296 words) - 20:48, 29 July 2016
-
==How to Setup FTP to Record Snapshots and Sub-Stream==
3. Locate the file you downloaded and extract the contents of the zipped file to the FTP folder you just created in the root of your hard drive.
2 KB (378 words) - 15:23, 3 June 2016
-
==How to install HDD==
*Do not drill through the ribbon to the left of the HDD.
991 bytes (156 words) - 19:18, 1 July 2016
-
==How to install CD-ROM==
Link to Download PDF Manual: [[Media:Burner_Installation_with_8_HDD_Bracket.doc | C
1 KB (157 words) - 19:19, 1 July 2016
-
==How to Connect a WiFi Camera to NVR==
This shows you how to connect a wifi camera to NVR.
2 KB (239 words) - 16:39, 11 October 2016
-
This article will show you how to backup recorded video off of a DVR or NVR over the network using Internet E
1. Login to your NVR or DVR via Internet Explorer.
1 KB (194 words) - 21:01, 25 July 2016
-
==How to Access System Using P2P via Mobile Application==
...n IDMSS(IOS)/GDMSS(Android) allows you to add Dahua recorders and cameras to the mobile app using P2P.
5 KB (724 words) - 18:27, 12 July 2019
-
|It is the function that the speed dome can horizontally scan back and forth to display image with a certain speed in a certain range. The speed dome can s
...tc), and it can quickly call these parameters to adjust the PTZ and camera to the location when necessary, the operator can store and call preset via con
7 KB (1,085 words) - 18:02, 3 April 2020
-
==How to Setup Scan==
The Scan feature allows you to set a predetermined path from Point A to Point B
872 bytes (130 words) - 19:44, 14 August 2019
-
==How to Setup Preset==
Pre-sets are used to define single or multiple locations that are saved to the camera's internal memory. Pre-Sets are used in conjunction with the, "T
1 KB (206 words) - 19:43, 14 August 2019
-
==How to Setup Tour==
The Tour feature allows you to set a up multiple locations for the PTZ to cycle through using already established Pre-Sets.
1 KB (182 words) - 19:44, 14 August 2019
-
==How to Setup Pattern==
The Pattern feature allows you to set a predetermined path to multiple locations, and adjust Zoom, Focus, and Iris as the camera moves be
960 bytes (140 words) - 21:07, 25 July 2016
-
==How to Setup Light Wiper==
The Light Wiper feature allows a PTZ equipped with a Wiper to remotely clear moisture from the lens.
527 bytes (75 words) - 19:41, 14 August 2019
-
==How to Setup Pan==
The Pan feature allows the PTZ to move between two pre-established horizontal points.
641 bytes (92 words) - 19:57, 9 January 2020
