Template:NVR48/48-16P Series Back Panel
From Dahua Wiki
NVR48/48-16P Series
The NVR48 series rear panel is shown as below.
The NVR48-16P series rear panel is shown as below.
Name |
Function | |
Power switch |
/ |
Power on-off button |
Power input port |
/ |
Input AC 100~240V. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
VIEDEO OUT |
Video output port |
CVBS output. |
1~16 |
Alarm input port 1~16 |
|
GND |
Alarm input ground port. | |
NO1~NO5 |
Alarm output port 1~5 |
|
C1~C5 | ||
NC5 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
CTRL 12V |
/ |
Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. |
+12V |
/ |
+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. |
Network port |
One 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
eSATA |
eSATA port |
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
RS-232 |
RS-232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3 |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
PoE PORTS |
16 PoE ports |
Built-in Switch. Support PoE. The 16 PoE ports series products supports total 150W power. One PoE port max supports 15W. |