IVS:PTZ IVS Auto Tracking

From Dahua Wiki

Jump to: navigation, search

PTZ IVS Auto Tracking Setup

Description

  • Disclaimer - Auto Tracking and Panoramic view will not work simultaneously

PTZ tracking is an innovative feature that transforms manually controlled PTZ cameras into automated tracking systems that keep an moving object in focus and centered in the frame. It follows the object where stationary cameras would lose the object once out of the fixed cameras field of view.

Prerequisites

  • Auto-Tracking capable PTZ

IVS Best Practices

To assess issues with IVS compatibility between the camera and NVR, please update both devices to the most current firmware and factory reset the NVR, and use the hard reset button to reset the camera.

How to Setup Single Scene

Video Instructions

How To Setup Auto Tracking in Action Video

Step by Step Instructions

1. Login to your PTZ from the web interface.

IVS1.jpg

2. Click, "Setup"

IVS2.jpg

3. Click, "IVS Setup" and then, "IVS"

IVS3.jpg

4. Check the box for, "IVS Enable" and "Alarm Track Enable" Then click, "Save"

IVS4.jpg

5. Click, "Scene Setup"

IVS5.jpg

6. Position the PTZ, click, "Add Scene" and then, "Save"

IVS6.jpg

7. Click, "Rule Setup"

IVS7.jpg

8. Click, "Add Rule"

IVS8.jpg

9. Click the rule under, "Rule Type" and select the type of rule you wish to create. For this example we used, "Intrusion"

IVS9.jpg

10. Click the image icon under, "Draw"

IVS10.jpg

11. Draw the rule on the feed to the left.

IVS11.jpg

12. Next to, "Target Filter" click, "Draw"

IVS12.jpg

13. Create a box for the maximum (Yellow box), and the minimum (Red box) size that an object needs to be to detect.

IVS13.jpg

14. Click, "Save"

IVS14.jpg

15. Click, "Parameter"

IVS15.jpg

16. Select, "Compromise Mode" under, "Detect Balance"

IVS16.jpg

17. Click, "Add Detect Region"

IVS17.jpg

18. Draw a box around the area you are to enable for the detect region, and click "Save"

IVS18.jpg

How to Setup Multi Scene for SmartPSS 1.16

Video Instructions

Prerequisites

  • SmartPSS version 1.16
  • PTZ connected to the network

Step by Step Instructions

1. From the home menu select live view.

2. From the right hand side select to highlight the PTZ device -> Right click on highlighted PTZ -> Select IVS Channel Config.

800px