-
!colspan="2"|Basic Setup
!colspan="2"|Recording Setup
31 KB (4,376 words) - 19:58, 24 August 2023
-
...he camera on the Config Tool but cannot add the IP camera Check IP channel setup is right or not (such as IP address, user name, password, connection protoc
...or not (Main Menu->Storage->Record). Solution: substream recording was not setup.
5 KB (908 words) - 01:15, 27 November 2018
-
* Setup is not correct
2. Setup DST, if applicable.
1 KB (145 words) - 22:39, 29 March 2017
-
==Motion Record==
5. Select Period "Setup" to set time and days motion is to be set to.
9 KB (1,386 words) - 22:27, 14 October 2020
-
This article is a step by step setup guide for Quick DDNS. Quick DDNS is Dynamic Domain Name System which is a m
*Record the device's MAC address from the sticker fixed to the device, or by findin
4 KB (609 words) - 15:49, 10 February 2017
-
=DDNS Setup No-IP=
This article is a step by step setup guide for NoIP DDNS. NoIP DDNS is Dynamic Domain Name System which is a met
3 KB (422 words) - 22:07, 1 August 2019
-
==N+M Cluster Standby Setup==
...can turn Sub into standby position manually, user can choose to past back record data in Sub at same time
6 KB (1,140 words) - 20:17, 7 December 2022
-
*If DVR color or brightness setup is not correct then readjust setup or default.
[[Category:Record Setup]]
920 bytes (151 words) - 19:19, 17 August 2016
-
...udio feed, log onto your NVR and make sure your encoding setup is correct (Setup>Image>Encode>) and make sure your are on the right channel where the camera
3. Also make sure your camera is scheduled to record during specified operation.
2 KB (315 words) - 17:21, 17 August 2016
-
5.Period setup is not correct.
6. Motion detection region setup is not correct.
2 KB (227 words) - 17:58, 5 November 2020
-
* [[Troubleshoot/NVR/Need_More_Recording_Space| Record Storage Period is Too Short]]
|Brightness is 0. Please restore factory default setup.
10 KB (1,564 words) - 20:39, 7 December 2022
-
!colspan="2"| IP Camera 5.0 UI Setup
!colspan="2"| IP Camera Initial Setup
5 KB (767 words) - 18:28, 21 November 2023
-
Main Menu->Setup->Storage->Destination->Local
[[Category:Setup]]
540 bytes (72 words) - 22:15, 6 August 2019
-
* Section 1: Encode setup bar
Record
5 KB (733 words) - 22:57, 11 August 2016
-
Before the setup, please make sure you have installed the auto iris.
...e camera from no-WDR mode to the WDR mode, system may lose several seconds record video.
9 KB (1,540 words) - 18:07, 12 December 2017
-
===Record Path===
Here you can set snap image saved path and the record storage path.
836 bytes (122 words) - 23:20, 11 August 2016
-
===Audio Setup===
The setup here is for audio encode mode and the bidirectional talk encode both.
2 KB (257 words) - 22:43, 11 August 2016
-
Here you can set arm/disarm period. Click on set button to open period setup menu.
There are six periods every day for setup and you must check box in front of each period to enable it.
4 KB (640 words) - 19:46, 15 August 2016
-
...setup, user must set record mode is auto or manual. Note:If record mode in record control is off, then device will not snapshot according to schedule.
Record schedule steps:
2 KB (372 words) - 23:01, 11 August 2016
-
===Record Control===
Here you can select file size within 1min~120min. Default setup is 8 minutes.
1 KB (159 words) - 22:56, 11 August 2016
-
...nt is 8 when the device is shipped out of the factory. The factory default setup includes two levels: user and admin. You can set the corresponding group an
Please note the user rights shall not exceed the group right setup.
3 KB (444 words) - 23:13, 11 August 2016
-
Here you can set device alarm type and alarm sound setup.
...splayed, when alarm is triggered, there will be no image prompt, but alarm record will be in list on the right.
2 KB (228 words) - 22:51, 11 August 2016
-
* Select date. If you do not select, current setup applies to today only. You can select all week column to apply to the whole
Record
4 KB (598 words) - 19:32, 15 August 2019
-
*[[DSS/V8/DSS_Express/Instruction/Storage|Setup Local Storage in DSS Express V8]]
*[[DSS/V8/DSS_Express/Instruction/Local_Recording_Schedule|Setup Recording schedule in DSS Express V8]]
14 KB (2,112 words) - 19:01, 5 January 2024
-
===How to Configure IP Camera to Record to SD-Card===
2. Click, "Setup"
881 bytes (125 words) - 23:04, 11 August 2016
-
==How to Configure SmartPSS to Record IP Camera Feed / PC-NVR Setup==
4. Click the device you wish to setup to record.
2 KB (310 words) - 18:22, 2 March 2021
-
==How to setup NAS Storage==
====NAS Storage Setup====
1 KB (172 words) - 22:11, 6 August 2019
-
=Initial Setup=
* [[IPCRemoteAccess | How to setup remote access for IP Camera(StandAlone)]]
9 KB (978 words) - 18:28, 14 June 2016
-
==Setup==
* [[IPCRecordPath | Record Path]]
4 KB (328 words) - 05:56, 15 August 2016
-
...uced. Usually we do not modify it. Of course, we can use COM to change its setup.
; Pre-Record
16 KB (2,651 words) - 18:05, 15 August 2016
-
...e camera from no-WDR mode to the WDR mode, system may lose several seconds record video.
...y/night''': It is to set device color and the B/W mode switch. The default setup is auto.
4 KB (722 words) - 05:06, 15 August 2016
-
Activate current control, modify setup, and then move up and down.
Record
25 KB (3,410 words) - 19:15, 1 July 2016
-
==Schedule Record==
==Schedule Record Setup for Web service==
4 KB (574 words) - 00:11, 7 February 2020
-
===Snapshot Setup on NVR===
...tions below to setup Snapshot recording on your recorder. You will need to setup an event on a camera or recorder in order for snapshot to occur.
2 KB (276 words) - 23:11, 2 November 2020
-
...evice directly. Here you can set TCP/UPD/auto connection mode. The default setup is TCP.
...e camera from no-WDR mode to the WDR mode, system may lose several seconds record video.
10 KB (1,675 words) - 19:12, 15 August 2016
-
...e via etho0 or the eth1. Usually you need to set one default card (default setup is etho) to request the auto network service form the device-end such as DH
...may pop up dialog box for you to confirm setup when you want to change MTU setup. Click OK button to confirm current reboot, or you can click Cancel button
22 KB (3,608 words) - 20:41, 7 December 2022
-
...C button to exit the region setup interface system will not save your zone setup.
...signal at the fifth second, the buzzer, tour, PTZ activation, snapshot, record channel will begin another 10s while the screen prompt, alarm upload, email
15 KB (2,430 words) - 20:48, 3 December 2020
-
====Record====
The record type priority is: Alarm>Motion>Regular
5 KB (719 words) - 19:12, 15 August 2016
-
* Pack duration: Here is for you to specify record duration. The value ranges from 0 to 120 minutes. Default value is 60 minut
* Pack duration: Here is for you to specify record duration. The value ranges from 1 to 120 minutes. Default value is 60 minut
13 KB (2,073 words) - 19:11, 15 August 2016
-
==Setup Audio Recording==
Record Audio in addition to video.
746 bytes (103 words) - 23:45, 2 November 2020
-
1. In order to get the system to save a snapshot we will setup motion detection. On the NVR go to the MAIN MENU->EVENT->VIDEO DETECT->Moti
2. Now we will setup the terms of recording by going to MAIN MENU->STORAGE->SCHEDULE->Snapshot a
2 KB (356 words) - 20:33, 3 November 2020
-
...focus in the video and causes the image to become blurry. It can activate record, snapshot and alarm according to the judgment result.
# Working period setup, default is all day.
464 bytes (67 words) - 19:48, 18 March 2016
-
==How to Setup FTP to Record Snapshots and Sub-Stream==
Port: 21 or the port you setup earlier in SmallFTPD
2 KB (378 words) - 15:23, 3 June 2016
-
...ht limit. Set preset 22 or 79 to begin record. Set preset 23 or 80 to stop record.
|[[PTZScan|WebUI Setup]]
7 KB (1,085 words) - 18:02, 3 April 2020
-
Follow this guide to setup your mobile device with our app!
5. Toggle on to choose record type. ( All, Regular, Alarm, and Motion Detect)
2 KB (319 words) - 15:51, 10 October 2019
-
==XVR 4.0 Setup (New GUI)==
===Basic Setup===
9 KB (1,100 words) - 16:30, 12 July 2019
-
rect 510 18 604 47 [[IPCamera#Setup]]
==Setup==
2 KB (193 words) - 18:06, 27 January 2016
-
=Recorder Alarm Setup=
This article is to show you instruction of how to wire and setup the alarm input from the recorder.
3 KB (464 words) - 19:47, 2 August 2019
-
#REDIRECT [[NVR/Recording Setup/Motion Record]]
47 bytes (6 words) - 15:23, 14 August 2019
-
#REDIRECT [[NVR/Recording Setup/Schedule Record]]
49 bytes (6 words) - 15:23, 14 August 2019
-
#REDIRECT [[NVR/Recording Setup/Alarm Record]]
46 bytes (6 words) - 15:23, 14 August 2019
-
==How to Setup Alarm Recording Using A Physical Alarm==
4. Login to the NVR, and click, "Setup"
2 KB (276 words) - 16:39, 11 August 2016
-
#REDIRECT [[NVR/Recording Setup/Motion Record]]
47 bytes (6 words) - 20:38, 23 March 2016
-
#REDIRECT [[NVR/Recording Setup/Motion Record Troubleshoot]]
60 bytes (7 words) - 20:45, 23 March 2016
-
#REDIRECT [[NVR/Recording Setup/Alarm Record]]
46 bytes (6 words) - 22:40, 23 March 2016
-
Related Articles in [[:Category:Record]]
[[Category:HCVR]][[Category:NVR]][[Category:Record]]
15 KB (2,080 words) - 00:29, 4 November 2020
-
===Initial Setup:===
===Quick Setup:===
4 KB (610 words) - 20:20, 3 May 2016
-
[[Category:Record Setup]]
2 KB (253 words) - 20:20, 9 November 2016
-
==Setup Suggestions==
*[[IVS/Global_Setup|Global IVS Setup Instructions]]
9 KB (1,471 words) - 20:54, 7 July 2023
-
=====Record=====
[[SmartPSS/Add_Device_P2P|Setup Remote Access via P2P using SmartPSS]]
3 KB (312 words) - 17:34, 6 September 2016
-
==How to Setup iSCSI with Windows Server 2012==
13. Once all tasks are completed close out the setup wizard.
3 KB (459 words) - 23:42, 2 November 2020
-
The amount of time a NVR can record is determined by many factors. Ultimately the primary bottleneck will boil
...and out, but those are used exclusively for two-way talk only, and cannot record audio to channel 1 or any other channel.
5 KB (721 words) - 17:30, 28 February 2017
-
The majority of Dahua's cameras will record at 30FPS by default. This value can be adjusted from 1 to 30.
...:IVSIconSmartTracking.png|link=PTZ_IVS_Auto_Tracking|PTZ IVS Auto Tracking Setup
14 KB (2,125 words) - 21:40, 15 November 2021
-
...and out, but those are used exclusively for two-way talk only, and cannot record audio to channel 1 or any other channel.
The majority of Dahua's cameras will record at 30FPS by default. This value can be adjusted from 1 to 30.
11 KB (1,719 words) - 21:41, 15 November 2021
-
==Schedule Record==
...if|800px]]Please Note: For this example, we will be setting all cameras to record 24/7
908 bytes (121 words) - 19:22, 15 August 2016
-
===Basic Setup===
===Recording Setup===
3 KB (416 words) - 16:48, 2 July 2021
-
=How to record audio and two-way talk=
1. Log into the camera and go to Setup->Camera->Audio, audio menu is shown as below
637 bytes (96 words) - 22:53, 30 June 2016
-
==eSATA Setup and Use==
5. Now to setup the drive to for storage please select the ADVANCED TAB and pull down the H
2 KB (323 words) - 00:57, 3 November 2020
-
[[Category:Record Setup]]
[[Category:Record]]
533 bytes (86 words) - 00:16, 18 February 2017
-
[[Category:Record Setup]]
[[Category:Record]]
3 KB (370 words) - 19:11, 18 August 2020
-
3. Select Setup, and then Select System Options once the page has loaded.
6. Once the Preview page has loaded select the Setup tab and then go to Remote->Remote to add a camera.
2 KB (367 words) - 00:15, 18 February 2017
-
[[Category:Record Setup]]
[[Category:Record]]
2 KB (288 words) - 00:14, 18 February 2017
-
*Schedule Record Setup: Browser, SmartPSS, System Interface
*Motion Record Setup: Browser, SmartPSS, System Interface
1 KB (156 words) - 18:23, 19 May 2017
-
* [[Backup/Backup_Redundant_HDD| Redundant HDD Setup]]
* [[Backup/NM_Standby_Setup| N+M Hot Standby Setup]]
2 KB (305 words) - 18:23, 19 May 2017
-
...end configuring and testing devices before installation. After the Initial Setup for AP and Station Step By Step Instructions will come information on how t
*This is a bad place to setup DaHua (name of AP and Station) since there are overlapping broadcasts.
8 KB (1,347 words) - 21:37, 22 February 2017
-
2. Navigate to Setup->Image->Encode menu select the orientation of your mount under installation
3. Below are screenshots of how the record modes look:
2 KB (308 words) - 23:07, 23 June 2020
-
==How to Configure SmartPSS 2.0 to Record IP Camera Feed / PC-NVR Setup==
12. Select Record Plan tab in the right hand column once these devices have been added.
3 KB (432 words) - 22:31, 12 December 2016
-
2. Select Setup.
[[Category:Record Setup]]
1 KB (179 words) - 20:27, 21 February 2017
-
===Initial Setup===
[[Software/Dahua_Toolbox/Initial_Setup|How to Download, Install, and Setup Toolbox]]
3 KB (447 words) - 04:12, 17 March 2022
-
===Record===
[[Category:Record]]
1 KB (166 words) - 18:33, 19 May 2017
-
===Recording Schedule Setup===
Recording Schedule Setup via WEB Service.
2 KB (227 words) - 17:34, 19 May 2017
-
|Brightness is 0. Please restore factory default setup.
|Record function has been disabled
14 KB (2,424 words) - 20:43, 7 December 2022
-
|Initial Setup
|[[NVR/Basic_Setup/Initial_Setup|Initial Setup]]
28 KB (3,973 words) - 17:13, 4 November 2020
-
==Motion Recordings Setup for SmartPSS 1.16.4==
How to Setup Motion Recording via SmartPSS 1.16
2 KB (297 words) - 21:49, 20 November 2017
-
How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 1.16
...alarm is activated. To record the alarm event you will need to check mark "record channel".
3 KB (399 words) - 00:31, 3 November 2020
-
==How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 2.0==
How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 2.0
3 KB (373 words) - 00:23, 3 November 2020
-
==Face Detect setup via Web Service==
...send it to the NVR for analysis and processing, it can activate snapshot, record and alarm.
1 KB (222 words) - 21:52, 20 November 2017
-
!colspan="2"|Basic Setup
!colspan="2"|Recording Setup
3 KB (486 words) - 21:39, 15 November 2021
-
=New GUI - Schedule Record Setup=
[[Category:Setup]]
2 KB (334 words) - 19:03, 31 August 2023
-
=New GUI - Motion Detection Recording Setup=
This article will go over Motion Detection Recording setup in detail on the recorder's new GUI
2 KB (356 words) - 16:27, 12 September 2023
-
*[[DSS_Windows/Both/EMap|How to Setup EMap]]
*[[DSS_Windows/Both/Event_Center|How Setup and Use Event Center]]
9 KB (1,429 words) - 21:39, 15 November 2021
-
=How to setup recording in DSS Pro=
In order to setup recording in DSS pro, you must first setup the storage plan.
2 KB (320 words) - 20:52, 1 August 2019
-
|[[NVR/Recording_Setup/Schedule_Record|SystemUI Setup]]
...ng_Setup/Motion_Record#Set_up_Motion_recording_via_local_recorder|SystemUI Setup]]
2 KB (326 words) - 17:04, 5 July 2018
-
=Alarm Record Setup=
This article is to show you how to setup alarm recording thru new Web GUI.
2 KB (262 words) - 19:13, 31 August 2023
-
This article will show you steps to setup a folder on your windows computer as an FTP repository, using a program cal
[[Category:Record]]
3 KB (538 words) - 21:58, 1 August 2019
-
4. Select the '''Record Channel''' you like to search. You can only search 1 channel at a time.
[[Category:Setup]]
2 KB (236 words) - 19:16, 31 August 2023
-
=uVMS Initial Setup=
===SQL Server Setup===
8 KB (1,145 words) - 17:47, 5 November 2018
-
*Record download supports many formats: dav, avi, mp4, flv and asf.
===Initial Setup===
14 KB (2,031 words) - 23:28, 20 March 2023
-
==Tripwire Setup==
6. Next be sure to check any other options you may want such as Record & Record Delay, Snapshot, Relay out (1, 2, or both)alarm Delay and email.
2 KB (333 words) - 23:10, 28 February 2019
-
...enter, leave, and enter & leave three direction selection, it can activate record, snapshot, and alarm according to the judgment result.
2. Select Setup -> Select Event -> IVS
2 KB (382 words) - 23:47, 28 February 2019
