NVR/Basic Setup/Smart Add
(Redirected from NVRSmartAdd)
This allows you to add cameras into NVR using smart add.
- IP Cameras
Step by Step Instructions
Accessing Smart Add
- Method 1: From the startup wizard, click Smart add button.
- Method 2: On the preview interface, right click mouse and then select Smart add. Now you can go to the smart add interface.
Smart Add Setup
Click smart add button, you can see device enables DHCP function.
System pops up the following interface for you to confirm IP information if there are several IP segments
Now you can see system is auto adding IPC to the corresponding channels.
You can see the following dialog box after system successfully added network cameras.