Difference between revisions of "IVS2.0:SmartPSS1.16/Abandoned Missing"

(Created page with " ===SmartPSS Setup=== ====Prerequisites==== * SmartPSS * IVS capable device with Face Detection * Upgraded devices to latest firmware ====Video Instructions==== <embedvideo se...")
 
(No difference)

Latest revision as of 18:58, 1 June 2017

SmartPSS Setup

Prerequisites

  • SmartPSS
  • IVS capable device with Face Detection
  • Upgraded devices to latest firmware

Video Instructions

Step by Step Instructions

1. Right click and select IVS channel config.

MissingSetupSmartPSS1.png

2. Select Taken away detection.

MissingSetupSmartPSS2.png

3. Draw your rule.

MissingSetupSmartPSS3.png

4. Select largest and smallest object and click apply and ok.

MissingSetupSmartPSS4.png


SmartPSS 2 Setup

Prerequisites

  • SmartPSS
  • IVS capable device with Abandoned/Missing Detection
  • Upgraded devices to latest firmware

Video Instructions

Step by Step Instructions

1. Go to Live View.

SPSS2Intrusion1.png

2. Right click on a device and select IVS Channel cfg.

SPSS2Intrusion2.png

3. Select IVS and click Next.

SPSS2Intrusion3.png

4. Under Detect Region, Draw your rule and apply.

SPSS2Intrusion4.png

5. Under Rule config -> Target Filter -> Draw the rule -> Apply -> save.

SPSS2Intrusion5.png

6. Under Rule config -> Rule Details -> Add rule -> Select Abandoned Object -> Draw.

SPSS2Abandoned6.png

7. Draw -> Apply -> Save.

SPSS2Abandoned7.png

Retrieved from "https://DahuaWiki.com/index.php?title=IVS2.0:SmartPSS1.16/Abandoned_Missing&oldid=24532"