Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "CMS/DSS/Add Decoder"
(→Step by Step Instructions) |
|||
(3 intermediate revisions by the same user not shown) | |||
Line 8: | Line 8: | ||
* NVR/DVR | * NVR/DVR | ||
* Decoder | * Decoder | ||
+ | * A Connection to the DSS Server | ||
+ | * An Internet Connection | ||
+ | * DSS server IP address | ||
+ | |||
+ | Windows: | ||
+ | |||
+ | * Microsoft Windows XP SP3, Microsoft Windows 7 or above | ||
+ | * Core 2 dual-core 3.0Ghz or above | ||
+ | * At least 10GB free hard disk space or above | ||
+ | * directX 9.0c or above | ||
+ | * 2GB Memory or above | ||
+ | * 1024×768 resolution or above | ||
+ | * Internet explorer 7 or above | ||
===Video Instructions=== | ===Video Instructions=== | ||
− | <embedvideo service="youtube"> | + | <embedvideo service="youtube">https://youtu.be/479ZhxoRlns</embedvideo> |
===Step by Step Instructions=== | ===Step by Step Instructions=== | ||
− | + | 1. From the Main Menu select the General Tab ➞ Select Device ➞ Select Device ➞ Select Decoder ➞ Select Add | |
− | [[File: | + | [[File:decoderdss_1.png|600px]] |
− | + | 2. Input required info ➞ Select "Getting Info" | |
[[File:dessdecoder3.png|600px]] | [[File:dessdecoder3.png|600px]] |
Latest revision as of 20:57, 2 November 2016
Contents
How to Add a Decoder
Description
This is a guide for How to Add a Decoder.
Prerequisites
- DSS
- Connected network
- NVR/DVR
- Decoder
- A Connection to the DSS Server
- An Internet Connection
- DSS server IP address
Windows:
- Microsoft Windows XP SP3, Microsoft Windows 7 or above
- Core 2 dual-core 3.0Ghz or above
- At least 10GB free hard disk space or above
- directX 9.0c or above
- 2GB Memory or above
- 1024×768 resolution or above
- Internet explorer 7 or above
Video Instructions
Step by Step Instructions
1. From the Main Menu select the General Tab ➞ Select Device ➞ Select Device ➞ Select Decoder ➞ Select Add
2. Input required info ➞ Select "Getting Info"
- Input device name ➞ Input Channel Amount ➞ Select OK.