Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "NVR/Basic Setup/Smart Add"
(2 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
==Smart Add== | ==Smart Add== | ||
===Description=== | ===Description=== | ||
+ | This allows you to add cameras into NVR using smart add. | ||
===Prerequisites=== | ===Prerequisites=== | ||
+ | *IP Cameras | ||
+ | *NVR/DVR | ||
===Video Instructions=== | ===Video Instructions=== |
Latest revision as of 19:17, 10 June 2021
Contents
Smart Add
Description
This allows you to add cameras into NVR using smart add.
Prerequisites
- IP Cameras
- NVR/DVR
Video Instructions
Step by Step Instructions
Accessing Smart Add
- Method 1: From the startup wizard, click Smart add button.
- Method 2: On the preview interface, right click mouse and then select Smart add. Now you can go to the smart add interface.
Smart Add Setup
Click smart add button, you can see device enables DHCP function.
System pops up the following interface for you to confirm IP information if there are several IP segments
Now you can see system is auto adding IPC to the corresponding channels.
You can see the following dialog box after system successfully added network cameras.