Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "3rdParty/How To Add A Hikvision Camera to A Dahua NVR"
(→Step by Step Instructions) |
|||
(11 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
==How to Add a Hikvision Camera to a Dahua NVR== | ==How to Add a Hikvision Camera to a Dahua NVR== | ||
+ | ===NOTE=== | ||
+ | *ONVIF must be enabled on the Hikvision camera before trying to add the device to a Dahua recorder. | ||
+ | |||
+ | [[File:Hikvision_IPC_Enable_ONVIF.png|400px]] => [[file:Hikvision_IPC_Enable_ONVIF1.png|400px]] | ||
+ | |||
+ | *Enable "HIkvision-CGI" | ||
+ | |||
+ | [[file:Hikvision_IPC_Enable_ONVIF2.png|400px]] | ||
+ | |||
+ | *Set, "Hikvision-CGI Authentication" to, "digest/basic" | ||
+ | |||
+ | [[file:Hikvision_IPC_Enable_ONVIF3.png|400px]] | ||
+ | |||
+ | *Set, "RTSP Authentication" and "WEB Authentication" to, "digest/basic" | ||
+ | |||
+ | [[file:Hikvision_IPC_Enable_ONVIF4.png|400px]] | ||
+ | |||
+ | *After IP Camera is added to recorder, reboot both devices. | ||
+ | |||
===Description=== | ===Description=== | ||
− | + | The below instructions will show you show to add a Hikvision IP Camera to a Dahua NVR, that is on the same Local Area Network, or LAN. | |
+ | |||
===Prerequisites=== | ===Prerequisites=== | ||
*Dahua NVR | *Dahua NVR | ||
Line 9: | Line 29: | ||
*User name and password to both NVR and IP Camera | *User name and password to both NVR and IP Camera | ||
===Video Instructions=== | ===Video Instructions=== | ||
− | <embedvideo service="youtube"> | + | <embedvideo service="youtube">https://youtu.be/YhUuHfHF05E</embedvideo> |
+ | |||
===Step by Step Instructions=== | ===Step by Step Instructions=== | ||
1. Start by creating a list of your devices. | 1. Start by creating a list of your devices. | ||
Line 23: | Line 44: | ||
|} | |} | ||
− | Note: You can locate your Dahua NVR's IP address by going to the network menu, or using the [[ConfigTool|ConfigTool.]] You can locate your Hikvision's IP address using [http://www.hikvision.com/us/Tools_82.html Hikvisions SADP Tool.] | + | Note: |
+ | *You can locate your Dahua NVR's IP address by going to the network menu, or using the [[ConfigTool|ConfigTool.]] | ||
+ | *You can locate your Hikvision's IP address using [http://www.hikvision.com/us/Tools_82.html Hikvisions SADP Tool.] | ||
2. Open Internet Explorer, and input your NVR's IP address into the URL bar at the top of the browser window. | 2. Open Internet Explorer, and input your NVR's IP address into the URL bar at the top of the browser window. | ||
− | [[file:HikvisionAddCamera1.png]] | + | [[file:HikvisionAddCamera1.png|800px]] |
3. Enter your credentials, and click, "Login" | 3. Enter your credentials, and click, "Login" | ||
− | [[file:HikvisionAddCamera2.png]] | + | [[file:HikvisionAddCamera2.png|800px]] |
4. Click, "Setting" | 4. Click, "Setting" | ||
− | [[file:HikvisionAddCamera3.png]] | + | [[file:HikvisionAddCamera3.png|800px]] |
5. Then click, "Camera" and then, "Remote" | 5. Then click, "Camera" and then, "Remote" | ||
− | [[file:HikvisionAddCamera4.png]] | + | [[file:HikvisionAddCamera4.png|800px]] |
6. Click, "Manual Add" | 6. Click, "Manual Add" | ||
− | [[file:HikvisionAddCamera5.png]] | + | [[file:HikvisionAddCamera5.png|800px]] |
7. Change, "Manufacturer" to "ONVIF" | 7. Change, "Manufacturer" to "ONVIF" | ||
Line 63: | Line 86: | ||
11. If successful, the device will be listed in the bottom table, with a green check under, "Status" | 11. If successful, the device will be listed in the bottom table, with a green check under, "Status" | ||
− | [[file:HikvisionAddCamera9.png]] | + | [[file:HikvisionAddCamera9.png|800px]] |
+ | |||
+ | [[Category:Record Setup]] | ||
+ | [[Category:Record]] | ||
+ | [[Category:ONVIF]] | ||
+ | [[Category:NVR Troubleshoot]] | ||
+ | [[Category:NVR Interface]] | ||
+ | [[Category:NVR]] | ||
+ | [[Category:IP Camera]] |
Latest revision as of 19:11, 18 August 2020
Contents
How to Add a Hikvision Camera to a Dahua NVR
NOTE
- ONVIF must be enabled on the Hikvision camera before trying to add the device to a Dahua recorder.
- Enable "HIkvision-CGI"
- Set, "Hikvision-CGI Authentication" to, "digest/basic"
- Set, "RTSP Authentication" and "WEB Authentication" to, "digest/basic"
- After IP Camera is added to recorder, reboot both devices.
Description
The below instructions will show you show to add a Hikvision IP Camera to a Dahua NVR, that is on the same Local Area Network, or LAN.
Prerequisites
- Dahua NVR
- Hikvision IP Camera
- NVR and IP Camera connected to the same LAN
- IP Address of NVR and IP Camera
- User name and password to both NVR and IP Camera
Video Instructions
Step by Step Instructions
1. Start by creating a list of your devices.
NVR4216-8P | Hikvision DS-2CD2342WD-I |
IP:172.16.13.121 | IP: 172.16.13.41 |
User Name:admin | User Name:admin |
Password:(Your Password) | Password:(Your Password) |
Note:
- You can locate your Dahua NVR's IP address by going to the network menu, or using the ConfigTool.
- You can locate your Hikvision's IP address using Hikvisions SADP Tool.
2. Open Internet Explorer, and input your NVR's IP address into the URL bar at the top of the browser window.
3. Enter your credentials, and click, "Login"
4. Click, "Setting"
5. Then click, "Camera" and then, "Remote"
6. Click, "Manual Add"
7. Change, "Manufacturer" to "ONVIF"
8. Input your Hikvision camera's IP in, "IP Address"
9. Input your Hikvision camera's password into the, "Password" field.
10. Click, "Save"
11. If successful, the device will be listed in the bottom table, with a green check under, "Status"