Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "NVR/Back Panel"
(→NVR48/48-16P Series) |
m (JP moved page NVRBackPanel to NVR/Back Panel) |
||
(11 intermediate revisions by 2 users not shown) | |||
Line 1,574: | Line 1,574: | ||
==NVR72 Series== | ==NVR72 Series== | ||
+ | The NVR72 series rear panel is shown as below. | ||
+ | |||
+ | [[file:NVR72BackPanel.png|500px]] | ||
+ | |||
+ | {| class="wikitable" width="567" | ||
+ | |- | ||
+ | | colspan="2" width="212"| | ||
+ | '''Name ''' | ||
+ | |||
+ | | width="354"| | ||
+ | '''Function ''' | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | USB2.0 port | ||
+ | |||
+ | | width="354"| | ||
+ | USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | Network port | ||
+ | |||
+ | | width="354"| | ||
+ | 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | RS-232 | ||
+ | |||
+ | | width="123"| | ||
+ | RS-232 debug COM. | ||
+ | |||
+ | | width="354"| | ||
+ | It is for general COM debug to configure IP address or transfer transparent COM data. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | HDMI | ||
+ | |||
+ | | width="123"| | ||
+ | High Definition Media Interface | ||
+ | |||
+ | | width="354"| | ||
+ | High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | VGA | ||
+ | |||
+ | | width="123"| | ||
+ | VGA video output port | ||
+ | |||
+ | | width="354"| | ||
+ | VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | MIC IN | ||
+ | |||
+ | | width="123"| | ||
+ | Audio input port | ||
+ | |||
+ | | width="354"| | ||
+ | Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | MIC OUT | ||
+ | |||
+ | | width="123"| | ||
+ | Audio output port | ||
+ | |||
+ | | width="354"| | ||
+ | Audio output port. It is to output the analog audio signal to the devices such as the sound box. | ||
+ | |||
+ | * Bidirectional talk output. | ||
+ | * Audio output on 1-window video monitor. | ||
+ | * Audio output on 1-window video playback. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | 1~8 | ||
+ | |||
+ | | width="123"| | ||
+ | Alarm input port 1~8 | ||
+ | |||
+ | | width="354"| | ||
+ | * There are two groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close). | ||
+ | * When your alarm input device is using external power, please make sure the device and the NVR have the same ground. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | GND | ||
+ | |||
+ | | width="354"| | ||
+ | Alarm input ground port. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | NO1~NO3 | ||
+ | |||
+ | | rowspan="2" width="123"| | ||
+ | Alarm output port 1~3 | ||
+ | |||
+ | | rowspan="2" width="354"| | ||
+ | * 3 groups of alarm output ports. (Group 1:port NO1~C1,Group 2:port NO2~C2,Group 3:port NO3~C3)).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device. | ||
+ | * NO:Normal open alarm output port. | ||
+ | * C:Alarm output public end. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | C1~C3 | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | A | ||
+ | |||
+ | | rowspan="2" width="123"| | ||
+ | RS-485 communication port | ||
+ | |||
+ | | width="354"| | ||
+ | RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | B | ||
+ | |||
+ | | width="354"| | ||
+ | RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | Power input port | ||
+ | |||
+ | | width="354"| | ||
+ | Input DC 12V/5A. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | Power switch | ||
+ | |||
+ | | width="123"| | ||
+ | / | ||
+ | |||
+ | | width="354"| | ||
+ | Power on/off button. | ||
+ | |||
+ | |} | ||
+ | |||
==NVR72-8P Series== | ==NVR72-8P Series== | ||
+ | The NVR72-8P series rear panel is shown as below. | ||
+ | |||
+ | [[file:NVR728PBackPanel.png|500px]] | ||
+ | |||
+ | |||
+ | {| class="wikitable" width="548" | ||
+ | |- | ||
+ | | colspan="2" width="222"| | ||
+ | '''Name ''' | ||
+ | |||
+ | | width="326"| | ||
+ | '''Function ''' | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | USB2.0 port | ||
+ | |||
+ | | width="326"| | ||
+ | USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | Network port | ||
+ | |||
+ | | width="326"| | ||
+ | 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | ||
+ | |||
+ | |- | ||
+ | | width="99"| | ||
+ | RS-232 | ||
+ | |||
+ | | width="123"| | ||
+ | RS-232 debug COM. | ||
+ | |||
+ | | width="326"| | ||
+ | It is for general COM debug to configure IP address or transfer transparent COM data. | ||
+ | |||
+ | |- | ||
+ | | width="99"| | ||
+ | HDMI | ||
+ | |||
+ | | width="123"| | ||
+ | High Definition Media Interface | ||
+ | |||
+ | | width="326"| | ||
+ | High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. | ||
+ | |||
+ | |- | ||
+ | | width="99"| | ||
+ | VGA | ||
+ | |||
+ | | width="123"| | ||
+ | VGA video output port | ||
+ | |||
+ | | width="326"| | ||
+ | VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. | ||
+ | |||
+ | |- | ||
+ | | width="99"| | ||
+ | 1~8 | ||
+ | |||
+ | | width="123"| | ||
+ | Alarm input port 1~8 | ||
+ | |||
+ | | width="326"| | ||
+ | * There are two groups. The first group is from port 1 to port 4; the second group is from port 5 to port 8. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close). | ||
+ | * When your alarm input device is using external power, please make sure the device and the NVR have the same ground. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | GND | ||
+ | |||
+ | | width="326"| | ||
+ | Alarm input ground port. | ||
+ | |||
+ | |- | ||
+ | | width="99"| | ||
+ | NO1~NO3 | ||
+ | |||
+ | | rowspan="2" width="123"| | ||
+ | Alarm output port 1~3 | ||
+ | |||
+ | | rowspan="2" width="326"| | ||
+ | * 3 groups of alarm output ports. (Group 1:port NO1~C1,Group 2:port NO2~C2,Group 3:port NO3~C3)).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device. | ||
+ | * NO:Normal open alarm output port. | ||
+ | * C:Alarm output public end. | ||
+ | |||
+ | |- | ||
+ | | width="99"| | ||
+ | C1~C3 | ||
+ | |||
+ | |- | ||
+ | | width="99"| | ||
+ | A | ||
+ | |||
+ | | rowspan="2" width="123"| | ||
+ | RS-485 communication port | ||
+ | |||
+ | | width="326"| | ||
+ | RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="99"| | ||
+ | B | ||
+ | |||
+ | | width="326"| | ||
+ | RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | Power input port | ||
+ | |||
+ | | width="326"| | ||
+ | Input AC 100~240V. | ||
+ | |||
+ | |- | ||
+ | | width="99"| | ||
+ | Power switch | ||
+ | |||
+ | | width="123"| | ||
+ | / | ||
+ | |||
+ | | width="326"| | ||
+ | Power on-off button. | ||
+ | |||
+ | |- | ||
+ | | width="99"| | ||
+ | PoE PORTS | ||
+ | |||
+ | | width="123"| | ||
+ | / | ||
+ | |||
+ | | width="326"| | ||
+ | Bult-in Switch. Support PoE. | ||
+ | |||
+ | The 8 PoE series product supports total 48V 120W. One PoE port max supports 15W. | ||
+ | |||
+ | |- | ||
+ | | width="99"| | ||
+ | MIC IN | ||
+ | |||
+ | | width="123"| | ||
+ | Audio input port | ||
+ | |||
+ | | width="326"| | ||
+ | Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. | ||
+ | |||
+ | |- | ||
+ | | width="99"| | ||
+ | MIC OUT | ||
+ | |||
+ | | width="123"| | ||
+ | Audio output port | ||
+ | |||
+ | | width="326"| | ||
+ | Audio output port. It is to output the analog audio signal to the devices such as the sound box. | ||
+ | |||
+ | * Bidirectional talk output. | ||
+ | * Audio output on 1-window video monitor. | ||
+ | * Audio output on 1-window video playback. | ||
+ | |||
+ | |} | ||
+ | |||
==NVR74 Series== | ==NVR74 Series== | ||
+ | The NVR74 series rear panel is shown as below. | ||
+ | |||
+ | [[file:NVR74BackPanel.png|500px]] | ||
+ | |||
+ | {| class="wikitable" width="565" | ||
+ | |- | ||
+ | | width="122"| | ||
+ | Icon | ||
+ | |||
+ | | width="123"| | ||
+ | Name | ||
+ | |||
+ | | width="320"| | ||
+ | Function | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | Power switch | ||
+ | |||
+ | | width="320"| | ||
+ | Power on/off button. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | Power input port | ||
+ | |||
+ | | width="320"| | ||
+ | Input AC 100~240V. | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | MIC IN | ||
+ | |||
+ | | width="123"| | ||
+ | Audio input port | ||
+ | |||
+ | | width="320"| | ||
+ | Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | MIC OUT | ||
+ | |||
+ | | width="123"| | ||
+ | Audio output port | ||
+ | |||
+ | | width="320"| | ||
+ | Audio output port. It is to output the analog audio signal to the devices such as the sound box. | ||
+ | |||
+ | * Bidirectional talk output. | ||
+ | * Audio output on 1-window video monitor. | ||
+ | * Audio output on 1-window video playback. | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | VIEDEO OUT | ||
+ | |||
+ | | width="123"| | ||
+ | Video output port | ||
+ | |||
+ | | width="320"| | ||
+ | CVBS output. | ||
+ | |||
+ | |- style="mso-yfti-irow: 6; page-break-inside: avoid; height: 15.6pt; mso-prop-change: 小马 20130819T1516;" | ||
+ | | width="122"| | ||
+ | HDMI | ||
+ | |||
+ | | width="123"| | ||
+ | High Definition Media Interface | ||
+ | |||
+ | | width="320"| | ||
+ | High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | 1~16 | ||
+ | |||
+ | | width="123"| | ||
+ | Alarm input port 1~16 | ||
+ | |||
+ | | width="320"| | ||
+ | * There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close). | ||
+ | * When your alarm input device is using external power, please make sure the device and the NVR have the same ground. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | GND | ||
+ | |||
+ | | width="320"| | ||
+ | Alarm input ground port. | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | NO1~NO5 | ||
+ | |||
+ | | rowspan="3" width="123"| | ||
+ | Alarm output port 1~5 | ||
+ | |||
+ | | rowspan="3" width="320"| | ||
+ | * 5 groups of alarm output ports. (Group 1:port NO1~C1,Group 2:port NO2~C2,Group 3:port NO3~C3, Group 4:port NO4~C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device. | ||
+ | * NO: Normal open alarm output port. | ||
+ | * C: Alarm output public end. | ||
+ | * NC: Normal close alarm output port. | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | C1~C5 | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | NC5 | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | A | ||
+ | |||
+ | | rowspan="2" width="123"| | ||
+ | RS-485 communication port | ||
+ | |||
+ | | width="320"| | ||
+ | RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | B | ||
+ | |||
+ | | width="320"| | ||
+ | RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | CTRL 12V | ||
+ | |||
+ | | width="123"| | ||
+ | / | ||
+ | |||
+ | | width="320"| | ||
+ | Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | +12V | ||
+ | |||
+ | | width="123"| | ||
+ | / | ||
+ | |||
+ | | width="320"| | ||
+ | +12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | Network port | ||
+ | |||
+ | | width="320"| | ||
+ | One 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | eSATA | ||
+ | |||
+ | | width="123"| | ||
+ | eSATA port | ||
+ | |||
+ | | width="320"| | ||
+ | External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | USB2.0 port | ||
+ | |||
+ | | width="320"| | ||
+ | USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | RS-232 | ||
+ | |||
+ | | width="123"| | ||
+ | RS-232 debug COM. | ||
+ | |||
+ | | width="320"| | ||
+ | It is for general COM debug to configure IP address or transfer transparent COM data. | ||
+ | |||
+ | |- | ||
+ | | width="122"| | ||
+ | VGA | ||
+ | |||
+ | | width="123"| | ||
+ | VGA video output port | ||
+ | |||
+ | | width="320"| | ||
+ | VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. | ||
+ | |||
+ | |} | ||
+ | |||
==NVR74-8P/74-16P Series== | ==NVR74-8P/74-16P Series== | ||
+ | The NVR74-8P series rear panel is shown as below. | ||
+ | |||
+ | [[file:NVR748PBackPanel.png|500px]] | ||
+ | |||
+ | The NVR74-16P series rear panel is shown as below. | ||
+ | |||
+ | [[file:NVR7416PBackPanel.png|500px]] | ||
+ | |||
+ | {| class="wikitable" width="565" | ||
+ | |- | ||
+ | | colspan="2" width="233"| | ||
+ | Port Name | ||
+ | |||
+ | | width="332"| | ||
+ | Function | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | Power switch | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Power on-off button | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | Power input port | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Input AC 100~240V. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | MIC IN | ||
+ | |||
+ | | width="131"| | ||
+ | Audio input port | ||
+ | |||
+ | | width="332"| | ||
+ | Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | MIC OUT | ||
+ | |||
+ | | width="131"| | ||
+ | Audio output port | ||
+ | |||
+ | | width="332"| | ||
+ | Audio output port. It is to output the analog audio signal to the devices such as the sound box. | ||
+ | |||
+ | * Bidirectional talk output. | ||
+ | * Audio output on 1-window video monitor. | ||
+ | * Audio output on 1-window video playback. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | VIEDEO OUT | ||
+ | |||
+ | | width="131"| | ||
+ | Video output port | ||
+ | |||
+ | | width="332"| | ||
+ | CVBS output | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | 1~16 | ||
+ | |||
+ | | width="131"| | ||
+ | Alarm input port 1~16 | ||
+ | |||
+ | | width="332"| | ||
+ | * There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close). | ||
+ | * When your alarm input device is using external power, please make sure the device and the NVR have the same ground. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | GND | ||
+ | |||
+ | | width="332"| | ||
+ | Alarm input ground port. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | NO1~NO5 | ||
+ | |||
+ | | rowspan="3" width="131"| | ||
+ | Alarm output port 1~5 | ||
+ | |||
+ | | rowspan="3" width="332"| | ||
+ | * 5 groups of alarm output ports. (Group 1:port NO1~C1,Group 2:port NO2~C2,Group 3:port NO3~C3, Group 4:port NO4~C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device. | ||
+ | * NO: Normal open alarm output port. | ||
+ | * C: Alarm output public end. | ||
+ | * NC: Normal close alarm output port. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | C1~C5 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | NC5 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | A | ||
+ | |||
+ | | rowspan="2" width="131"| | ||
+ | RS-485 communication port | ||
+ | |||
+ | | width="332"| | ||
+ | RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | B | ||
+ | |||
+ | | width="332"| | ||
+ | RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | CTRL 12V | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | +12V | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | +12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | Network port | ||
+ | |||
+ | | width="332"| | ||
+ | 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | eSATA | ||
+ | |||
+ | | width="131"| | ||
+ | eSATA port | ||
+ | |||
+ | | width="332"| | ||
+ | External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | USB2.0 port | ||
+ | |||
+ | | width="332"| | ||
+ | USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | RS-232 | ||
+ | |||
+ | | width="131"| | ||
+ | RS232 debug COM. | ||
+ | |||
+ | | width="332"| | ||
+ | It is for general COM debug to configure IP address or transfer transparent COM data. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | HDMI | ||
+ | |||
+ | | width="131"| | ||
+ | High Definition Media Interface | ||
+ | |||
+ | | width="332"| | ||
+ | High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | VGA | ||
+ | |||
+ | | width="131"| | ||
+ | VGA video output port | ||
+ | |||
+ | | width="332"| | ||
+ | VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | PoE PORTS | ||
+ | |||
+ | | width="131"| | ||
+ | 8 PoE ports | ||
+ | |||
+ | | width="332"| | ||
+ | Built-in Switch. Support PoE. | ||
+ | |||
+ | The 8 PoE ports series products supports total 48V 120W power. One PoE port max supports 15W. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | PoE PORTS | ||
+ | |||
+ | | width="131"| | ||
+ | 16 PoE ports | ||
+ | |||
+ | | width="332"| | ||
+ | Built-in Switch. Support PoE. The 16 PoE ports series products supports total 150W power. One PoE port max supports 15W. | ||
+ | |||
+ | |} | ||
+ | |||
==NVR78 Series== | ==NVR78 Series== | ||
+ | The NVR78 series rear panel is shown as below. | ||
+ | |||
+ | [[file:NVR78BackPanel.png|500px]] | ||
+ | |||
+ | {| class="wikitable" width="565" | ||
+ | |- | ||
+ | | colspan="2" width="233"| | ||
+ | Port Name | ||
+ | |||
+ | | width="332"| | ||
+ | Function | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | Power switch | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Power on-off button | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | Power input port | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Input AC 100~240V. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | MIC IN | ||
+ | |||
+ | | width="131"| | ||
+ | Audio input port | ||
+ | |||
+ | | width="332"| | ||
+ | Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | MIC OUT | ||
+ | |||
+ | | width="131"| | ||
+ | Audio output port | ||
+ | |||
+ | | width="332"| | ||
+ | Audio output port. It is to output the analog audio signal to the devices such as the sound box. | ||
+ | |||
+ | * Bidirectional talk output. | ||
+ | * Audio output on 1-window video monitor. | ||
+ | * Audio output on 1-window video playback. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | VIEDEO OUT | ||
+ | |||
+ | | width="131"| | ||
+ | Video output port | ||
+ | |||
+ | | width="332"| | ||
+ | CVBS output | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | 1~16 | ||
+ | |||
+ | | width="131"| | ||
+ | Alarm input port 1~16 | ||
+ | |||
+ | | width="332"| | ||
+ | * There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close). | ||
+ | * When your alarm input device is using external power, please make sure the device and the NVR have the same ground. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | GND | ||
+ | |||
+ | | width="332"| | ||
+ | Alarm input ground port. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | NO1~NO5 | ||
+ | |||
+ | | rowspan="3" width="131"| | ||
+ | Alarm output port 1~5 | ||
+ | |||
+ | | rowspan="3" width="332"| | ||
+ | * 5 groups of alarm output ports. (Group 1:port NO1~C1,Group 2:port NO2~C2,Group 3:port NO3~C3, Group 4:port NO4~C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device. | ||
+ | * NO: Normal open alarm output port. | ||
+ | * C: Alarm output public end. | ||
+ | * NC: Normal close alarm output port. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | C1~C5 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | NC5 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | A | ||
+ | |||
+ | | rowspan="2" width="131"| | ||
+ | RS-485 communication port | ||
+ | |||
+ | | width="332"| | ||
+ | RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | B | ||
+ | |||
+ | | width="332"| | ||
+ | RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | CTRL 12V | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | +12V | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | +12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | Network port | ||
+ | |||
+ | | width="332"| | ||
+ | 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | eSATA | ||
+ | |||
+ | | width="131"| | ||
+ | eSATA port | ||
+ | |||
+ | | width="332"| | ||
+ | External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | USB2.0 port | ||
+ | |||
+ | | width="332"| | ||
+ | USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | RS-232 | ||
+ | |||
+ | | width="131"| | ||
+ | RS-232 debug COM. | ||
+ | |||
+ | | width="332"| | ||
+ | It is for general COM debug to configure IP address or transfer transparent COM data. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | HDMI | ||
+ | |||
+ | | width="131"| | ||
+ | High Definition Media Interface | ||
+ | |||
+ | | width="332"| | ||
+ | High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | VGA | ||
+ | |||
+ | | width="131"| | ||
+ | VGA video output port | ||
+ | |||
+ | | width="332"| | ||
+ | VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. | ||
+ | |||
+ | |} | ||
+ | |||
==NVR78-16P Series== | ==NVR78-16P Series== | ||
+ | The NVR78-16P series rear panel is shown as below. | ||
+ | |||
+ | [[file:NVR7816PBackPanel.png|500px]] | ||
+ | |||
+ | {| class="wikitable" width="565" | ||
+ | |- | ||
+ | | colspan="2" width="233"| | ||
+ | Port Name | ||
+ | |||
+ | | width="332"| | ||
+ | Function | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | Power switch | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Power on-off button | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | Power input port | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Input AC 100~240V. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | MIC IN | ||
+ | |||
+ | | width="131"| | ||
+ | Audio input port | ||
+ | |||
+ | | width="332"| | ||
+ | Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | MIC OUT | ||
+ | |||
+ | | width="131"| | ||
+ | Audio output port | ||
+ | |||
+ | | width="332"| | ||
+ | Audio output port. It is to output the analog audio signal to the devices such as the sound box. | ||
+ | |||
+ | * Bidirectional talk output. | ||
+ | * Audio output on 1-window video monitor. | ||
+ | * Audio output on 1-window video playback. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | VIEDEO OUT | ||
+ | |||
+ | | width="131"| | ||
+ | Video output port | ||
+ | |||
+ | | width="332"| | ||
+ | CVBS output | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | 1~16 | ||
+ | |||
+ | | width="131"| | ||
+ | Alarm input port 1~16 | ||
+ | |||
+ | | width="332"| | ||
+ | * There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close). | ||
+ | * When your alarm input device is using external power, please make sure the device and the NVR have the same ground. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | GND | ||
+ | |||
+ | | width="332"| | ||
+ | Alarm input ground port. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | NO1~NO5 | ||
+ | |||
+ | | rowspan="3" width="131"| | ||
+ | Alarm output port 1~5 | ||
+ | |||
+ | | rowspan="3" width="332"| | ||
+ | * 5 groups of alarm output ports. (Group 1:port NO1~C1,Group 2:port NO2~C2,Group 3:port NO3~C3, Group 4:port NO4~C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device. | ||
+ | * NO: Normal open alarm output port. | ||
+ | * C: Alarm output public end. | ||
+ | * NC: Normal close alarm output port. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | C1~C5 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | NC5 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | A | ||
+ | |||
+ | | rowspan="2" width="131"| | ||
+ | RS-485 communication port | ||
+ | |||
+ | | width="332"| | ||
+ | RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | B | ||
+ | |||
+ | | width="332"| | ||
+ | RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | CTRL 12V | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | +12V | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | +12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | Network port | ||
+ | |||
+ | | width="332"| | ||
+ | 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | eSATA | ||
+ | |||
+ | | width="131"| | ||
+ | eSATA port | ||
+ | |||
+ | | width="332"| | ||
+ | External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | USB2.0 port | ||
+ | |||
+ | | width="332"| | ||
+ | USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | RS-232 | ||
+ | |||
+ | | width="131"| | ||
+ | RS232 debug COM. | ||
+ | |||
+ | | width="332"| | ||
+ | It is for general COM debug to configure IP address or transfer transparent COM data. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | HDMI | ||
+ | |||
+ | | width="131"| | ||
+ | High Definition Media Interface | ||
+ | |||
+ | | width="332"| | ||
+ | High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | VGA | ||
+ | |||
+ | | width="131"| | ||
+ | VGA video output port | ||
+ | |||
+ | | width="332"| | ||
+ | VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | PoE PORTS | ||
+ | |||
+ | | width="131"| | ||
+ | 16 PoE ports | ||
+ | |||
+ | | width="332"| | ||
+ | Built-in Switch. Support PoE. The 16 PoE ports series products supports total 150W power. One PoE port max supports 15W. | ||
+ | |||
+ | |} | ||
+ | |||
==NVR78-RH Series== | ==NVR78-RH Series== | ||
+ | The NVR78-RH series rear panel is shown as below. | ||
+ | |||
+ | [[file:NVR78RHBackPanel.png|500px]] | ||
+ | |||
+ | {| class="wikitable" width="565" | ||
+ | |- | ||
+ | | colspan="2" width="233"| | ||
+ | Port Name | ||
+ | |||
+ | | width="332"| | ||
+ | Function | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | Power switch | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Power on-off button | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | Power input port | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Input AC 100~240V. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | MIC IN | ||
+ | |||
+ | | width="131"| | ||
+ | Audio input port | ||
+ | |||
+ | | width="332"| | ||
+ | Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | MIC OUT | ||
+ | |||
+ | | width="131"| | ||
+ | Audio output port | ||
+ | |||
+ | | width="332"| | ||
+ | Audio output port. It is to output the analog audio signal to the devices such as the sound box. | ||
+ | |||
+ | * Bidirectional talk output. | ||
+ | * Audio output on 1-window video monitor. | ||
+ | * Audio output on 1-window video playback. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | VIEDEO OUT | ||
+ | |||
+ | | width="131"| | ||
+ | Video output port | ||
+ | |||
+ | | width="332"| | ||
+ | CVBS output | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | 1~16 | ||
+ | |||
+ | | width="131"| | ||
+ | Alarm input port 1~16 | ||
+ | |||
+ | | width="332"| | ||
+ | * There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close). | ||
+ | * When your alarm input device is using external power, please make sure the device and the NVR have the same ground. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | GND | ||
+ | |||
+ | | width="332"| | ||
+ | Alarm input ground port. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | NO1~NO5 | ||
+ | |||
+ | | rowspan="3" width="131"| | ||
+ | Alarm output port 1~5 | ||
+ | |||
+ | | rowspan="3" width="332"| | ||
+ | * 5 groups of alarm output ports. (Group 1:port NO1~C1,Group 2:port NO2~C2,Group 3:port NO3~C3, Group 4:port NO4~C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device. | ||
+ | * NO: Normal open alarm output port. | ||
+ | * C: Alarm output public end. | ||
+ | * NC: Normal close alarm output port. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | C1~C5 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | NC5 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | A | ||
+ | |||
+ | | rowspan="2" width="131"| | ||
+ | RS-485 communication port | ||
+ | |||
+ | | width="332"| | ||
+ | RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | B | ||
+ | |||
+ | | width="332"| | ||
+ | RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | CTRL 12V | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | +12V | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | +12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | Network port | ||
+ | |||
+ | | width="332"| | ||
+ | 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | eSATA | ||
+ | |||
+ | | width="131"| | ||
+ | eSATA port | ||
+ | |||
+ | | width="332"| | ||
+ | External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | USB2.0 port | ||
+ | |||
+ | | width="332"| | ||
+ | USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | RS-232 | ||
+ | |||
+ | | width="131"| | ||
+ | RS232 debug COM. | ||
+ | |||
+ | | width="332"| | ||
+ | It is for general COM debug to configure IP address or transfer transparent COM data. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | HDMI | ||
+ | |||
+ | | width="131"| | ||
+ | High Definition Media Interface | ||
+ | |||
+ | | width="332"| | ||
+ | High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. The two HDMI ports to output video from different video sources. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | VGA | ||
+ | |||
+ | | width="131"| | ||
+ | VGA video output port | ||
+ | |||
+ | | width="332"| | ||
+ | VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. | ||
+ | |||
+ | |} | ||
+ | |||
==NVR70 Series== | ==NVR70 Series== | ||
+ | The NVR70 series rear panel is shown as below. | ||
+ | |||
+ | [[file:NVR70BackPanel.png|500px]] | ||
+ | |||
+ | {| class="wikitable" width="565" | ||
+ | |- | ||
+ | | colspan="2" width="233"| | ||
+ | Port Name | ||
+ | |||
+ | | width="332"| | ||
+ | Function | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | Power switch | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Power on-off button | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | Power input port | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Input AC 100~240V. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | MIC IN | ||
+ | |||
+ | | width="131"| | ||
+ | Audio input port | ||
+ | |||
+ | | width="332"| | ||
+ | Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | MIC OUT | ||
+ | |||
+ | | width="131"| | ||
+ | Audio output port | ||
+ | |||
+ | | width="332"| | ||
+ | Audio output port. It is to output the analog audio signal to the devices such as the sound box. | ||
+ | |||
+ | * Bidirectional talk output. | ||
+ | * Audio output on 1-window video monitor. | ||
+ | * Audio output on 1-window video playback. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | VIEDEO OUT | ||
+ | |||
+ | | width="131"| | ||
+ | Video output port | ||
+ | |||
+ | | width="332"| | ||
+ | CVBS output | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | 1~16 | ||
+ | |||
+ | | width="131"| | ||
+ | Alarm input port 1~16 | ||
+ | |||
+ | | width="332"| | ||
+ | * There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close). | ||
+ | * When your alarm input device is using external power, please make sure the device and the NVR have the same ground. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | GND | ||
+ | |||
+ | | width="332"| | ||
+ | Alarm input ground port. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | NO1~NO5 | ||
+ | |||
+ | | rowspan="3" width="131"| | ||
+ | Alarm output port 1~5 | ||
+ | |||
+ | | rowspan="3" width="332"| | ||
+ | * 5 groups of alarm output ports. (Group 1:port NO1~C1,Group 2:port NO2~C2,Group 3:port NO3~C3, Group 4:port NO4~C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device. | ||
+ | * NO: Normal open alarm output port. | ||
+ | * C: Alarm output public end. | ||
+ | * NC: Normal close alarm output port. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | C1~C5 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | NC5 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | A | ||
+ | |||
+ | | rowspan="2" width="131"| | ||
+ | RS-485 communication port | ||
+ | |||
+ | | width="332"| | ||
+ | RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | B | ||
+ | |||
+ | | width="332"| | ||
+ | RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | CTRL 12V | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | +12V | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | +12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | Network port | ||
+ | |||
+ | | width="332"| | ||
+ | 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | eSATA | ||
+ | |||
+ | | width="131"| | ||
+ | eSATA port | ||
+ | |||
+ | | width="332"| | ||
+ | External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | USB2.0 port | ||
+ | |||
+ | | width="332"| | ||
+ | USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | RS-232 | ||
+ | |||
+ | | width="131"| | ||
+ | RS232 debug COM. | ||
+ | |||
+ | | width="332"| | ||
+ | It is for general COM debug to configure IP address or transfer transparent COM data. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | HDMI | ||
+ | |||
+ | | width="131"| | ||
+ | High Definition Media Interface | ||
+ | |||
+ | | width="332"| | ||
+ | High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | VGA | ||
+ | |||
+ | | width="131"| | ||
+ | VGA video output port | ||
+ | |||
+ | | width="332"| | ||
+ | VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. | ||
+ | |||
+ | |} | ||
+ | |||
==NVR70-R Series== | ==NVR70-R Series== | ||
+ | The NVR70-R series rear panel is shown as below. | ||
+ | |||
+ | [[file:NVR70RBackPanel.png|500px]] | ||
+ | |||
+ | {| class="wikitable" width="565" | ||
+ | |- | ||
+ | | colspan="2" width="233"| | ||
+ | Port Name | ||
+ | |||
+ | | width="332"| | ||
+ | Function | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | Power switch | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Power on-off button | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | Power input port | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Input AC 100~240V. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | MIC IN | ||
+ | |||
+ | | width="131"| | ||
+ | Audio input port | ||
+ | |||
+ | | width="332"| | ||
+ | Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | MIC OUT | ||
+ | |||
+ | | width="131"| | ||
+ | Audio output port | ||
+ | |||
+ | | width="332"| | ||
+ | Audio output port. It is to output the analog audio signal to the devices such as the sound box. | ||
+ | |||
+ | * Bidirectional talk output. | ||
+ | * Audio output on 1-window video monitor. | ||
+ | * Audio output on 1-window video playback. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | VIEDEO OUT | ||
+ | |||
+ | | width="131"| | ||
+ | Video output port | ||
+ | |||
+ | | width="332"| | ||
+ | CVBS output | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | 1~16 | ||
+ | |||
+ | | width="131"| | ||
+ | Alarm input port 1~16 | ||
+ | |||
+ | | width="332"| | ||
+ | * There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close). | ||
+ | * When your alarm input device is using external power, please make sure the device and the NVR have the same ground. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | GND | ||
+ | |||
+ | | width="332"| | ||
+ | Alarm input ground port. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | NO1~NO5 | ||
+ | |||
+ | | rowspan="3" width="131"| | ||
+ | Alarm output port 1~5 | ||
+ | |||
+ | | rowspan="3" width="332"| | ||
+ | * 5 groups of alarm output ports. (Group 1:port NO1~C1,Group 2:port NO2~C2,Group 3:port NO3~C3, Group 4:port NO4~C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device. | ||
+ | * NO: Normal open alarm output port. | ||
+ | * C: Alarm output public end. | ||
+ | * NC: Normal close alarm output port. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | C1~C5 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | NC5 | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | A | ||
+ | |||
+ | | rowspan="2" width="131"| | ||
+ | RS-485 communication port | ||
+ | |||
+ | | width="332"| | ||
+ | RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | B | ||
+ | |||
+ | | width="332"| | ||
+ | RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | CTRL 12V | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | +12V | ||
+ | |||
+ | | width="131"| | ||
+ | / | ||
+ | |||
+ | | width="332"| | ||
+ | +12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | Network port | ||
+ | |||
+ | | width="332"| | ||
+ | 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | eSATA | ||
+ | |||
+ | | width="131"| | ||
+ | eSATA port | ||
+ | |||
+ | | width="332"| | ||
+ | External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. | ||
+ | |||
+ | |- | ||
+ | | width="131"| | ||
+ | USB2.0 port | ||
+ | |||
+ | | width="332"| | ||
+ | USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | RS-232 | ||
+ | |||
+ | | width="131"| | ||
+ | RS232 debug COM. | ||
+ | |||
+ | | width="332"| | ||
+ | It is for general COM debug to configure IP address or transfer transparent COM data. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | HDMI | ||
+ | |||
+ | | width="131"| | ||
+ | High Definition Media Interface | ||
+ | |||
+ | | width="332"| | ||
+ | High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. The two HDMI ports to output video from different video sources. | ||
+ | |||
+ | |- | ||
+ | | width="102"| | ||
+ | VGA | ||
+ | |||
+ | | width="131"| | ||
+ | VGA video output port | ||
+ | |||
+ | | width="332"| | ||
+ | VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. | ||
+ | |||
+ | |} | ||
+ | |||
==NVR42V-8P Series== | ==NVR42V-8P Series== | ||
+ | The NVR42V-8P series rear panel is shown as below. | ||
+ | |||
+ | [[file:NVR42V8PBackPanel.png|500px]] | ||
+ | |||
+ | {| class="wikitable" width="567" | ||
+ | |- | ||
+ | | colspan="2" width="212"| | ||
+ | '''Name ''' | ||
+ | |||
+ | | width="354"| | ||
+ | '''Function ''' | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | Power switch | ||
+ | |||
+ | | width="123"| | ||
+ | / | ||
+ | |||
+ | | width="354"| | ||
+ | Power on/off button. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | Power input port | ||
+ | |||
+ | | width="354"| | ||
+ | Input DC 53V--2.3A | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | MIC IN | ||
+ | |||
+ | | width="123"| | ||
+ | Audio input port | ||
+ | |||
+ | | width="354"| | ||
+ | Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | MIC OUT | ||
+ | |||
+ | | width="123"| | ||
+ | Audio output port | ||
+ | |||
+ | | width="354"| | ||
+ | Audio output port. It is to output the analog audio signal to the devices such as the sound box. | ||
+ | |||
+ | * Bidirectional talk output. | ||
+ | * Audio output on 1-window video monitor. | ||
+ | * Audio output on 1-window video playback. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | 1~2 | ||
+ | |||
+ | | width="123"| | ||
+ | Alarm input port 1~2 | ||
+ | |||
+ | | width="354"| | ||
+ | * When your alarm input device is using external power, please make sure the device and the NVR have the same ground. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | GND | ||
+ | |||
+ | | width="354"| | ||
+ | Alarm input ground port. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | C | ||
+ | |||
+ | | width="123"| | ||
+ | Alarm output public port | ||
+ | |||
+ | | width="354"| | ||
+ | Alarm output public end. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | NO | ||
+ | |||
+ | | width="123"| | ||
+ | Normal open | ||
+ | |||
+ | | width="354"| | ||
+ | Normal open alarm output port. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | Network port | ||
+ | |||
+ | | width="354"| | ||
+ | 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | ||
+ | |||
+ | |- | ||
+ | | width="123"| | ||
+ | USB3.0 port | ||
+ | |||
+ | | width="354"| | ||
+ | USB3.0 port. Connect to mouse, USB storage device, USB burner and etc. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | HDMI | ||
+ | |||
+ | | width="123"| | ||
+ | High Definition Media Interface | ||
+ | |||
+ | | width="354"| | ||
+ | High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | VGA | ||
+ | |||
+ | | width="123"| | ||
+ | VGA video output port | ||
+ | |||
+ | | width="354"| | ||
+ | VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. | ||
+ | |||
+ | |- | ||
+ | | width="90"| | ||
+ | PoE PORT | ||
+ | |||
+ | | width="123"| | ||
+ | / | ||
+ | |||
+ | | width="354"| | ||
+ | Bult-in Switch. Support PoE. | ||
+ | |||
+ | The 8 PoE series product supports total 48V 120W. One PoE port max supports 15W. | ||
+ | |||
+ | |} | ||
+ | [[Category:NVR]] |
Latest revision as of 19:16, 1 July 2016
Contents
- 1 Back Panel
- 1.1 NVR100/100-P Series
- 1.2 NVR11/11-P Series
- 1.3 NVR41/41-P/41-8P/41-W Series
- 1.4 NVR11H/11H-P/41H/41H-P/41H-8P Series
- 1.5 NVR42/42-P/42-8P Series
- 1.6 NVR42-4K Series
- 1.7 NVR42-8P-4K Series
- 1.8 NVR44/44-8P/44-16P Series
- 1.9 NVR44-4K/48-4K Series
- 1.10 NVR48/48-16P Series
- 1.11 NVR72 Series
- 1.12 NVR72-8P Series
- 1.13 NVR74 Series
- 1.14 NVR74-8P/74-16P Series
- 1.15 NVR78 Series
- 1.16 NVR78-16P Series
- 1.17 NVR78-RH Series
- 1.18 NVR70 Series
- 1.19 NVR70-R Series
- 1.20 NVR42V-8P Series
Back Panel
NVR100/100-P Series
The NVR100 rear panel is shown as below.
The NVR100-P rear panel is shown as below.
Port Name |
Connection |
Function |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
Network port |
10M/100Mbps self-adaptive Ethernet port. Connect to the network cable. | |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
Power input port |
Power socket.
| |
PoE PORT |
PoE port |
Built-in switch. Support PoE function. For PoE series product, you can use this port to provide power to the network camera. |
NVR11/11-P Series
The NVR11 rear panel is shown as below.
The NVR11-P rear panel is shown as below.
Port Name |
Connection |
Function |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
Network port |
10M/100Mbps self-adaptive Ethernet port. Connect to the network cable. | |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
GND |
Ground end | |
Power input port |
Power socket.
| |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
PoE PORT |
PoE port |
Built-in switch. Support PoE function. For PoE series product, you can use this port to provide power to the network camera. |
NVR41/41-P/41-8P/41-W Series
The NVR41 rear panel is shown as below.
The NVR41-P rear panel is shown as below.
The NVR41-8P rear panel is shown as below.
The NVR41-W rear panel is shown as below.
Port Name |
Connection |
Function |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
Network port |
10M/100Mbps self-adaptive Ethernet port. Connect to the network cable. | |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
GND |
Ground end | |
/ |
Power input port |
Power socket.
|
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
PoE PORT |
PoE port |
Built-in switch. Support PoE function. For PoE series product, you can use this port to provide power to the network camera. |
Wireless AP |
Support wireless hotspot function. Use WIFI to connect to the network camera when there is a hotspot. For 41-W series only. |
NVR11H/11H-P/41H/41H-P/41H-8P Series
The NVR11H/41H rear panel is shown below.
The NVR11H-P/41H-P rear panel is shown below.
The NVR41H-8P rear panel is shown below.
Port Name |
Connection |
Function |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
Network port |
10M/100Mbps self-adaptive Ethernet port. Connect to the network cable. | |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
GND |
Ground end | |
/ |
Power input port |
Power socket.
|
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
PoE PORT |
PoE port |
Built-in switch. Support PoE function. For PoE series product, you can use this port to provide power to the network camera. |
NVR42/42-P/42-8P Series
The NVR42 series rear panel is shown as below.
The NVR42-P series rear panel is shown as below.
The NVR42-8P series rear panel is shown as below.
Name |
Function | |
Power switch |
Power on/off button. | |
Power input port |
Input DC 12V/5A. For NVR42 series product only. | |
Switch power port. Input DC 48//1.04A. For NVR42-P series product only. | ||
Input AC 100~240V. For NVR42-8P series product only. | ||
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
1~4 |
Alarm input port 1~4 |
|
GND |
Alarm input ground port. | |
N1, N2 |
Alarm output port 1~2 |
|
C1, C2 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
|
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
RS-232 |
RS-232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
PoE PORTS |
/ |
Bult-in Switch. Support PoE. The 4 PoE series product supports total 48V 50W. The 8 PoE series product supports total 48V 120W. One PoE port max supports 15W. |
NVR42-4K Series
The NVR42-4K series rear panel is shown as below.
Icon |
Port Name |
Function | |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | ||
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. | |
USB3.0 port |
USB3.0 port. Connect to mouse, USB storage device, USB burner and etc. | ||
RS-232 |
RS-232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. | |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. | |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. | |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
| |
1~8 |
Alarm input port 1~8 |
| |
GND |
Alarm input ground port. | ||
NO1~NO3 |
Alarm output port 1~3 |
| |
C1~C3 | |||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. | |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | ||
Power input port |
Input DC 12V/4A. | ||
Power switch |
/ |
Power on/off button. |
NVR42-8P-4K Series
The NVR42-8P-4K series rear panel is shown as below.
Icon |
Port Name |
Function |
Power socket |
/ |
Input AC 220V. |
Power switch |
/ |
Power on/off button. |
PoE PORTS |
PoE port |
Built-in Switch,support PoE. The PoE PORTS can provide power to the network camera. The 8 PoE ports series product can support 48V 120W. |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. |
USB3.0 port |
USB3.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
RS-232 |
RS-232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
1~4 |
Alarm input port 1~4 |
|
GND |
Alarm input ground port. | |
N1,N2 |
Alarm output port 1~2 |
|
C1~C2 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. |
NVR44/44-8P/44-16P Series
The NVR44 series rear panel is shown as below.
The NVR44-8P series rear panel is shown as below.
The NVR44-16P series rear panel is shown as below.
Name |
Function | |
Power switch |
/ |
Power on-off button |
Power input port |
/ |
Input AC 100~240V. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
VIEDEO OUT |
Video output port |
CVBS output |
1~16 |
Alarm input port 1~16 |
|
Video output port |
CVBS output | |
NO1~NO5 |
Alarm output port 1~5 |
|
C1~C5 | ||
NC5 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
CTRL 12V |
/ |
Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. |
+12V |
/ |
+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
eSATA |
eSATA port |
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
RS-232 |
RS232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3 |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
PoE PORTS |
8 PoE ports |
Built-in Switch. Support PoE. The 8 PoE ports series products supports total 48V 120W power. One PoE port max supports 15W. |
PoE PORTS |
16 PoE ports |
Built-in Switch. Support PoE. The 16 PoE ports series products supports total 150W power. One PoE port max supports 15W. |
NVR44-4K/48-4K Series
These series rear panel is shown as below.
Name |
Function | |
Power switch |
Power on-off button | |
Power input port |
Input AC 100~240V. | |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
eSATA |
eSATA port |
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. |
USB3.0 port |
USB3.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4b. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
1~16 |
Alarm input port 1~16 |
|
Ground |
Alarm input ground end. | |
NO1~NO5 |
Alarm output port 1~5 |
|
C1~C5 | ||
NC5 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
CTRL 12V |
/ |
Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. |
+12V |
/ |
+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. |
RS-232 |
RS232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
NVR48/48-16P Series
The NVR48 series rear panel is shown as below.
The NVR48-16P series rear panel is shown as below.
Name |
Function | |
Power switch |
/ |
Power on-off button |
Power input port |
/ |
Input AC 100~240V. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
VIEDEO OUT |
Video output port |
CVBS output. |
1~16 |
Alarm input port 1~16 |
|
GND |
Alarm input ground port. | |
NO1~NO5 |
Alarm output port 1~5 |
|
C1~C5 | ||
NC5 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
CTRL 12V |
/ |
Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. |
+12V |
/ |
+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. |
Network port |
One 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
eSATA |
eSATA port |
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
RS-232 |
RS-232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3 |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
PoE PORTS |
16 PoE ports |
Built-in Switch. Support PoE. The 16 PoE ports series products supports total 150W power. One PoE port max supports 15W. |
NVR72 Series
The NVR72 series rear panel is shown as below.
Name |
Function | |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
RS-232 |
RS-232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
1~8 |
Alarm input port 1~8 |
|
GND |
Alarm input ground port. | |
NO1~NO3 |
Alarm output port 1~3 |
|
C1~C3 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
Power input port |
Input DC 12V/5A. | |
Power switch |
/ |
Power on/off button. |
NVR72-8P Series
The NVR72-8P series rear panel is shown as below.
Name |
Function | |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
RS-232 |
RS-232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
1~8 |
Alarm input port 1~8 |
|
GND |
Alarm input ground port. | |
NO1~NO3 |
Alarm output port 1~3 |
|
C1~C3 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
Power input port |
Input AC 100~240V. | |
Power switch |
/ |
Power on-off button. |
PoE PORTS |
/ |
Bult-in Switch. Support PoE. The 8 PoE series product supports total 48V 120W. One PoE port max supports 15W. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
NVR74 Series
The NVR74 series rear panel is shown as below.
Icon |
Name |
Function |
Power switch |
Power on/off button. | |
Power input port |
Input AC 100~240V. | |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
VIEDEO OUT |
Video output port |
CVBS output. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. |
1~16 |
Alarm input port 1~16 |
|
GND |
Alarm input ground port. | |
NO1~NO5 |
Alarm output port 1~5 |
|
C1~C5 | ||
NC5 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
CTRL 12V |
/ |
Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. |
+12V |
/ |
+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. |
Network port |
One 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
eSATA |
eSATA port |
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
RS-232 |
RS-232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
NVR74-8P/74-16P Series
The NVR74-8P series rear panel is shown as below.
The NVR74-16P series rear panel is shown as below.
Port Name |
Function | |
Power switch |
/ |
Power on-off button |
Power input port |
/ |
Input AC 100~240V. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
VIEDEO OUT |
Video output port |
CVBS output |
1~16 |
Alarm input port 1~16 |
|
GND |
Alarm input ground port. | |
NO1~NO5 |
Alarm output port 1~5 |
|
C1~C5 | ||
NC5 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
CTRL 12V |
/ |
Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. |
+12V |
/ |
+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
eSATA |
eSATA port |
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
RS-232 |
RS232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3 |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
PoE PORTS |
8 PoE ports |
Built-in Switch. Support PoE. The 8 PoE ports series products supports total 48V 120W power. One PoE port max supports 15W. |
PoE PORTS |
16 PoE ports |
Built-in Switch. Support PoE. The 16 PoE ports series products supports total 150W power. One PoE port max supports 15W. |
NVR78 Series
The NVR78 series rear panel is shown as below.
Port Name |
Function | |
Power switch |
/ |
Power on-off button |
Power input port |
/ |
Input AC 100~240V. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
VIEDEO OUT |
Video output port |
CVBS output |
1~16 |
Alarm input port 1~16 |
|
GND |
Alarm input ground port. | |
NO1~NO5 |
Alarm output port 1~5 |
|
C1~C5 | ||
NC5 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
CTRL 12V |
/ |
Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. |
+12V |
/ |
+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
eSATA |
eSATA port |
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
RS-232 |
RS-232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
NVR78-16P Series
The NVR78-16P series rear panel is shown as below.
Port Name |
Function | |
Power switch |
/ |
Power on-off button |
Power input port |
/ |
Input AC 100~240V. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
VIEDEO OUT |
Video output port |
CVBS output |
1~16 |
Alarm input port 1~16 |
|
GND |
Alarm input ground port. | |
NO1~NO5 |
Alarm output port 1~5 |
|
C1~C5 | ||
NC5 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
CTRL 12V |
/ |
Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. |
+12V |
/ |
+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
eSATA |
eSATA port |
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
RS-232 |
RS232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3 |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
PoE PORTS |
16 PoE ports |
Built-in Switch. Support PoE. The 16 PoE ports series products supports total 150W power. One PoE port max supports 15W. |
NVR78-RH Series
The NVR78-RH series rear panel is shown as below.
Port Name |
Function | |
Power switch |
/ |
Power on-off button |
Power input port |
/ |
Input AC 100~240V. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
VIEDEO OUT |
Video output port |
CVBS output |
1~16 |
Alarm input port 1~16 |
|
GND |
Alarm input ground port. | |
NO1~NO5 |
Alarm output port 1~5 |
|
C1~C5 | ||
NC5 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
CTRL 12V |
/ |
Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. |
+12V |
/ |
+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
eSATA |
eSATA port |
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
RS-232 |
RS232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. The two HDMI ports to output video from different video sources. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
NVR70 Series
The NVR70 series rear panel is shown as below.
Port Name |
Function | |
Power switch |
/ |
Power on-off button |
Power input port |
/ |
Input AC 100~240V. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
VIEDEO OUT |
Video output port |
CVBS output |
1~16 |
Alarm input port 1~16 |
|
GND |
Alarm input ground port. | |
NO1~NO5 |
Alarm output port 1~5 |
|
C1~C5 | ||
NC5 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
CTRL 12V |
/ |
Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. |
+12V |
/ |
+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
eSATA |
eSATA port |
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
RS-232 |
RS232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3 |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
NVR70-R Series
The NVR70-R series rear panel is shown as below.
Port Name |
Function | |
Power switch |
/ |
Power on-off button |
Power input port |
/ |
Input AC 100~240V. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
VIEDEO OUT |
Video output port |
CVBS output |
1~16 |
Alarm input port 1~16 |
|
GND |
Alarm input ground port. | |
NO1~NO5 |
Alarm output port 1~5 |
|
C1~C5 | ||
NC5 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
CTRL 12V |
/ |
Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. |
+12V |
/ |
+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
eSATA |
eSATA port |
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
RS-232 |
RS232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. The two HDMI ports to output video from different video sources. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
NVR42V-8P Series
The NVR42V-8P series rear panel is shown as below.
Name |
Function | |
Power switch |
/ |
Power on/off button. |
Power input port |
Input DC 53V--2.3A | |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
1~2 |
Alarm input port 1~2 |
|
GND |
Alarm input ground port. | |
C |
Alarm output public port |
Alarm output public end. |
NO |
Normal open |
Normal open alarm output port. |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
USB3.0 port |
USB3.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
PoE PORT |
/ |
Bult-in Switch. Support PoE. The 8 PoE series product supports total 48V 120W. One PoE port max supports 15W. |