Difference between revisions of "VideoLossAnalog"
Mark Navarro (talk | contribs) (→I connect the general analog camera to the device, there is no video output.) |
(→I connect the general analog camera to the device, there is no video output.) |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
There are following possibilities: | There are following possibilities: | ||
| − | * Check camera power supplying, data cable connection and etc. | + | * Check camera power supplying, data cable connection and etc. There might not be sufficient power from the power source. You can use a voltage tester if you have one on hand. |
| − | * Check the length of cable run. | + | * Check the length of cable run. Refer to the specifications for the limitations on the cable length. |
* This series device does not support the analog camera of all brands. Please make sure the device supports general standard definition analog camera. | * This series device does not support the analog camera of all brands. Please make sure the device supports general standard definition analog camera. | ||
| + | * If there is no video, check the coax connection. Unsecured faulty connections will result in no video or intermittent video. | ||
| + | |||
| + | [[Category:Troubleshoot]] | ||
Latest revision as of 17:52, 1 September 2016
I connect the general analog camera to the device, there is no video output.
There are following possibilities:
- Check camera power supplying, data cable connection and etc. There might not be sufficient power from the power source. You can use a voltage tester if you have one on hand.
- Check the length of cable run. Refer to the specifications for the limitations on the cable length.
- This series device does not support the analog camera of all brands. Please make sure the device supports general standard definition analog camera.
- If there is no video, check the coax connection. Unsecured faulty connections will result in no video or intermittent video.
