Difference between revisions of "Troubleshoot/NVR/Video Loss All Cameras"
(→Video Loss 1 Camera) |
|||
| (6 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
| − | ===Video Loss | + | ===Video Loss on Multiple Cameras=== |
There are following possibilities: | There are following possibilities: | ||
| − | *Firmware | + | |
| − | *Brightness is 0. Please restore factory default setup. | + | * Firmware may be old. Please upgrade to the latest version. |
| − | *There is no video input signal or it is too weak, due to the length of cable. | + | * Brightness is 0. Please restore factory default setup. |
| − | *Check privacy mask setup or your screen saver. | + | * If There is no video input signal or it is too weak, due to the length of cable, find shorter cable. |
| − | *DVR hardware malfunctions. | + | * Check privacy mask setup or your screen saver and remove them if possible. |
| + | * If DVR hardware malfunctions then change hardware. | ||
| + | * If Not enough bandwidth then check internet. | ||
| + | * If Insufficient power then check and change power supply. | ||
| + | * Check if you are using You are using aluminum braid or copper braid cable and change if not. | ||
| + | |||
| + | [[Category:Troubleshoot]] | ||
Latest revision as of 04:05, 17 August 2016
Video Loss on Multiple Cameras
There are following possibilities:
- Firmware may be old. Please upgrade to the latest version.
- Brightness is 0. Please restore factory default setup.
- If There is no video input signal or it is too weak, due to the length of cable, find shorter cable.
- Check privacy mask setup or your screen saver and remove them if possible.
- If DVR hardware malfunctions then change hardware.
- If Not enough bandwidth then check internet.
- If Insufficient power then check and change power supply.
- Check if you are using You are using aluminum braid or copper braid cable and change if not.
