Difference between revisions of "New GUI/Instructions/Motion Record"

(Step by Step Instructions)
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
=New GUI - Motion Record Setup=
+
=New GUI - Motion Detection Recording Setup=
  
 
==Description==
 
==Description==
This article will go over Motion Recording setup in detail on the recorder's new GUI
+
This article will go over Motion Detection Recording setup in detail on the recorder's new GUI
  
 
==Prerequisites==
 
==Prerequisites==
 
*Dahua Recorder with new GUI
 
*Dahua Recorder with new GUI
 
*Dahua Camera
 
*Dahua Camera
 +
 +
==Video Instructions==
 +
<embedvideo service="youtube">https://youtu.be/m6XdsuQDnuE</embedvideo>
  
 
==Step by Step Instructions==
 
==Step by Step Instructions==
  
1. On the main menu go to Management
+
1. On the main menu select '''Alarm'''
 
 
[[File:NGUIMotionRecord-1.jpg|900px]]
 
 
 
2. Click on Camera
 
 
 
[[File:NGUIMotionRecord-2.jpg|900px]]
 
 
 
3. Under Camera select "Video Detect" to enter the Motion Detect settings and enable the functions for your application
 
  
[[File:NGUIMotionRecord-3.jpg|900px]]
+
[[File:NewGUIMotionDetection1.png|600px]]
  
4. Click on "Settings" next to region to modify hot spots.
+
2. Select '''Video Detection''' on the left.
 +
<br>Then select the '''Motion Detection''' tab at the top.
 +
<br>Choose the channel from the drop-down next to '''Channel'''.
 +
<br>Check the box next to '''Enable'''.
 +
<br>Check the box next to '''Record Channel'''.
 +
<br>Click on '''Setting''' next to '''Region'''
  
'''Note'''-Colored boxes detect motion, transparent boxes do not detect motion
+
[[File:NewGUIMotionDetection2.png|600px]]
  
[[File:NGUIMotionRecord-4.jpg|900px]]
+
3. Highlight the areas in red where you want to track motion.
 +
<br>Then click '''OK''' at the bottom
  
5. Click on "More Settings" to open up the rest of the options for Motion Detect
+
[[File:NewGUIMotionDetection3.png|600px]]
  
[[File:NGUIMotionRecord-5.jpg|900px]]
+
4. Select '''More''' at the bottom
 +
<br>Check the boxes next to any of the other options you want to activate when motion is detected.
 +
<br>Click on '''OK'''
  
6. After configuring the settings, check "Enable MD" to enable motion detect and save the configurations by clicking on "Save"
+
[[File:NewGUIMotionDetection4.png|600px]]
  
[[File:NGUIMotionRecord-6.jpg|900px]]
+
5. Click on '''Apply''' at the bottom.
 +
<br>You will see "Operation Succeeded" at the top when your changes have been saved
  
7. We need to setup a schedule now so go to "Management" and click on "Storage"
+
[[File:NewGUIMotionDetection5.png|600px]]
  
[[File:NGUIMotionRecord-7.jpg|900px]]
+
6. Click on the '''Setting''' drop-down at the top and select '''Storage'''
  
8. Select the channel you are working with and go to settings
+
[[File:NewGUIMotionDetection6.png|600px]]
  
[[File:NGUIMotionRecord-8.jpg|900px]]
+
7. Select '''Schedule''' on the left.
 +
<br>Then select the '''Record''' tab at the top.
 +
<br>Choose the channel from the drop-down next to '''Channel'''.
 +
<br>Click on the '''Setting''' button next to any day of the week.
  
9. For this example we are doing Motion recording only for everyday of the week, so we disabled General recording and only kept Motion
+
[[File:NewGUIMotionDetection7.png|600px]]
  
[[File:NGUIMotionRecord-9.jpg|900px]]
+
8. Check the '''All''' box to enable all days of the week.
 +
<br>Check the '''Motion''' box for "Period 1".
 +
<br>Click '''OK''' at the bottom.
  
10. After setting up a schedule make sure you save any changes. Next go to "Record"
+
[[File:NewGUIMotionDetection8.png|600px]]
  
*'''Note'''- Clicking to "Copy" will allow you copy the current settings to other channels
+
9. Click on '''Apply''' at the bottom to save the settings
  
[[File:NGUIMotionRecord-10.jpg|900px]]
+
[[File:NewGUIMotionDetection9.png|600px]]
  
11. Make sure the channel(s) you are working with are set to "Auto" for the streams you want to enable. After doing so, exit the "Storage" tab.
+
10. Select '''Record Mode''' on the left.
 +
<br>Then make sure '''Auto''' is enabled for the appropriate channel(s).
 +
<br>Click on '''Apply''' at the bottom.
  
[[File:NGUIMotionRecord-11.jpg|900px]]
+
[[File:NewGUIMotionDetection10.png|600px]]
  
12. Go to "Video"
+
11. Click on the Main Menu icon at the top right.
 +
<br>Then select '''Search'''
  
[[File:NGUIMotionRecord-12.jpg|900px]]
+
[[File:NewGUIMotionDetection11.png|600px]]
  
13. You can now check recording for motion. It will be indicated with yellow bars
+
12. Check box next to the channel on the right.
 +
<br>You should see yellow lines/bars for motion recording
  
[[File:NGUIMotionRecord-13.jpg|900px]]
+
[[File:NewGUIMotionDetection12.png|600px]]

Latest revision as of 16:27, 12 September 2023

New GUI - Motion Detection Recording Setup

Description

This article will go over Motion Detection Recording setup in detail on the recorder's new GUI

Prerequisites

  • Dahua Recorder with new GUI
  • Dahua Camera

Video Instructions

Step by Step Instructions

1. On the main menu select Alarm

NewGUIMotionDetection1.png

2. Select Video Detection on the left.
Then select the Motion Detection tab at the top.
Choose the channel from the drop-down next to Channel.
Check the box next to Enable.
Check the box next to Record Channel.
Click on Setting next to Region

NewGUIMotionDetection2.png

3. Highlight the areas in red where you want to track motion.
Then click OK at the bottom

NewGUIMotionDetection3.png

4. Select More at the bottom
Check the boxes next to any of the other options you want to activate when motion is detected.
Click on OK

NewGUIMotionDetection4.png

5. Click on Apply at the bottom.
You will see "Operation Succeeded" at the top when your changes have been saved

NewGUIMotionDetection5.png

6. Click on the Setting drop-down at the top and select Storage

NewGUIMotionDetection6.png

7. Select Schedule on the left.
Then select the Record tab at the top.
Choose the channel from the drop-down next to Channel.
Click on the Setting button next to any day of the week.

NewGUIMotionDetection7.png

8. Check the All box to enable all days of the week.
Check the Motion box for "Period 1".
Click OK at the bottom.

NewGUIMotionDetection8.png

9. Click on Apply at the bottom to save the settings

NewGUIMotionDetection9.png

10. Select Record Mode on the left.
Then make sure Auto is enabled for the appropriate channel(s).
Click on Apply at the bottom.

NewGUIMotionDetection10.png

11. Click on the Main Menu icon at the top right.
Then select Search

NewGUIMotionDetection11.png

12. Check box next to the channel on the right.
You should see yellow lines/bars for motion recording

NewGUIMotionDetection12.png