Difference between revisions of "DSS S2/User Portal/System Settings"

Latest revision as of 19:21, 2 December 2022

How To Set System Settings In DSS User Portal

Description

This article will show you how to set system settings in the DSS Manager Portal

Prerequisites

• DSS
• Computer connected to the same local network / network segment as the server. The default IP address of the server is 192.168.1.108

Video Instructions

Coming Soon

Step by Step Instructions

1. Open a web browser and enter the IP address of the server. Enter the username/password and click Login

2. Click +

3. Click System

3. The system parameters will be displayed

The parameters are explained below:

Message Storage Time Setup

These parameters define the amount of time (in days) the server will keep the information type stored on the server.

• Log
• Alarm Info
• GPS Info
• POS (Point of Sale)
• Passed Vehicle Record
• Access Snapshot Device
• Customer Analysis

Time Sync

Check the box to enable

• Start Time - sets start time of time sync
• Sync Interval - sets a period of time to regularly sync the server time - 2 hours by default. The time between device and server is synchronized via SDK

Click the "Immediately" button to sync time with the device immediately.

Mail Server

Check the box to enable

Set mail server IP, port, encryption type, username/password, sender and test recipient.

Click 'Mail Test' to send a test email from the server

Active Directory

Coming Soon

POS End

Coming Soon