Difference between revisions of "New GUI/AI/Abandoned Setup"

 
(13 intermediate revisions by one other user not shown)
Line 5: Line 5:
  
 
===Prerequisites===
 
===Prerequisites===
* Supported device with Missing Object feature
+
* Supported device with Abandoned Object feature
  
 
===Video Instructions===
 
===Video Instructions===
<embedvideo service="youtube">https://youtu.be/iGkD3k7ECCo</embedvideo>
+
<embedvideo service="youtube">https://www.youtube.com/watch?v=PZlvxEwt_Kw</embedvideo>
  
 
===Step by Step Instructions===
 
===Step by Step Instructions===
1. Enter the Main Menu  
+
1. From the Main Menu click AI
  
*Right click at live view then select "Main Menu"
+
[[File:How_To_Setup_Intrusion_-_NewUI_-_1.jpg|500px]]
  
[[File:Tripwire_Setup_-_NewGUI_-_1.jpg|500px]]
+
2. Click Parameters > Smart Plan
  
2. Click Smart Detection
+
[[File:How_To_Setup_Intrusion_-_NewUI_-_2.jpg|500px]]
  
[[File:Tripwire_Setup_-_NewGUI_-_2.jpg|500px]]
+
3. Use the drop down box to select the Channel
  
3. Click Smart Plan
+
[[File:How_To_Setup_Intrusion_-_NewUI_-_3.jpg|500px]]
  
[[File:Tripwire_Setup_-_NewGUI_-_3.jpg|500px]]
+
4. Click the IVS icon to enable.  
  
4. Click to Select IVS (Light Bulb icon)
+
[[File:How_To_Setup_Intrusion_-_NewUI_-_4.jpg|500px]]
  
[[File:Tripwire_Setup_-_NewGUI_-_4.jpg|500px]]
+
The icon will highlight when selected.
  
When enabled the icon will highlight
+
Click Apply
  
Click Apply to save changes
+
[[File:How_To_Setup_Intrusion_-_NewUI_-_5.jpg|500px]]
  
[[File:Tripwire_Setup_-_NewGUI_-_5.jpg|500px]]
+
5. Click Parameters > IVS
  
6. Click Parameters
+
[[File:How_To_Setup_Intrusion_-_NewUI_-_6.jpg|500px]]
  
[[File:Tripwire_Setup_-_NewGUI_-_6.jpg|500px]]
+
6. Use the drop-down box to select the Channel
  
7. Use the dropdown box to select the Channel
+
Then click Add in the lower right side of the screen to Add an IVS rule
  
Then click Add in the lower right side of the screen to Add an IVS rule
+
[[File:How_To_Setup_Intrusion_-_NewUI_-_7.jpg|500px]]
  
[[File:Tripwire_Setup_-_NewGUI_-_7.jpg|500px]]
+
7. The created rule will appear in the list
  
8. The created rule will appear in the list
+
[[File:How_To_Setup_Intrusion_-_NewUI_-_8.jpg|500px]]
  
[[File:Tripwire_Setup_-_NewGUI_-_8.jpg|500px]]
 
  
 
9. Use the dropdown box to change the Rule Type to "Abandoned"
 
9. Use the dropdown box to change the Rule Type to "Abandoned"
Line 81: Line 80:
 
Click [[File:Tripwire_Setup_-_NewGUI_-_Trash_Icon.jpg]] icon to clear the current rule
 
Click [[File:Tripwire_Setup_-_NewGUI_-_Trash_Icon.jpg]] icon to clear the current rule
  
Once the tripwire rule settings have been created click OK
+
Once the Abandoned Object rule settings have been created click OK
 +
 
 +
13. Click the [[File:Tripwire_Setup_-_NewGUI_-_Trigger.jpg]] icon to set the Trigger settings when the IVS Abandoned Object rule is engaged.
 +
 
 +
[[File:How_To_Setup_Abandon_-_NewUI_-_7.jpg|500px]]
 +
 
 +
14. The Trigger menu will appear
 +
 
 +
[[File:How_To_Setup_Abandon_-_NewUI_-_8.jpg|500px]]
 +
 
 +
*Period
 +
*Alarm Out
 +
*Snapshot
 +
 
 +
Once the trigger rule settings have been created click OK
 +
 
 +
Once all Abandoned settings have been configured, Click Apply in the lower right of the screen to save all changes
 +
 
 +
15. The created Abandoned rule is now programmed
 +
 
 +
[[File:How_To_Setup_Abandon_-_NewUI_-_9.jpg|800px]]
 +
 
 +
[[Category:IVS/Premium_IVS/Abandoned]]
 +
 
 +
[[Category:IVS]]
 +
[[Category:UI]]
 +
[[Category:UI/SystemUI]]
 +
[[Category:SystemUI]]

Latest revision as of 19:01, 18 December 2023

How To Setup Abandoned Object

Description

This article will show you how to setup the Abandoned Object IVS feature on a supported device

Prerequisites

  • Supported device with Abandoned Object feature

Video Instructions

Step by Step Instructions

1. From the Main Menu click AI

How To Setup Intrusion - NewUI - 1.jpg

2. Click Parameters > Smart Plan

How To Setup Intrusion - NewUI - 2.jpg

3. Use the drop down box to select the Channel

How To Setup Intrusion - NewUI - 3.jpg

4. Click the IVS icon to enable.

How To Setup Intrusion - NewUI - 4.jpg

The icon will highlight when selected.

Click Apply

How To Setup Intrusion - NewUI - 5.jpg

5. Click Parameters > IVS

How To Setup Intrusion - NewUI - 6.jpg

6. Use the drop-down box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

How To Setup Intrusion - NewUI - 7.jpg

7. The created rule will appear in the list

How To Setup Intrusion - NewUI - 8.jpg


9. Use the dropdown box to change the Rule Type to "Abandoned"

How To Setup Abandon - NewUI - 1.jpg

How To Setup Abandon - NewUI - 2.jpg

10. Click the Pencil icon to draw the Missing Object rule

How To Setup Abandon - NewUI - 3.jpg

11. The Channel will fullscreen.

Left click anywhere inside the video frame to begin drawing the detection area for the object.

How To Setup Abandon - NewUI - 4.jpg

Right click to end drawing

How To Setup Abandon - NewUI - 5.jpg

12. You can use the Missing menu that appears for additional rule settings:

How To Setup Abandon - NewUI - 6.jpg

  • Name: A name can be applied to the rule
  • Period: Set a time (in seconds) for the Missing object rule to trigger


Click Tripwire Setup - NewGUI - Target Filter.jpg icon to set the Target Filter (maximum and minimum size size for Objects to follow rule)

Click Tripwire Setup - NewGUI - Trash Icon.jpg icon to clear the current rule

Once the Abandoned Object rule settings have been created click OK

13. Click the Tripwire Setup - NewGUI - Trigger.jpg icon to set the Trigger settings when the IVS Abandoned Object rule is engaged.

How To Setup Abandon - NewUI - 7.jpg

14. The Trigger menu will appear

How To Setup Abandon - NewUI - 8.jpg

  • Period
  • Alarm Out
  • Snapshot

Once the trigger rule settings have been created click OK

Once all Abandoned settings have been configured, Click Apply in the lower right of the screen to save all changes

15. The created Abandoned rule is now programmed

How To Setup Abandon - NewUI - 9.jpg