Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Template:IVS Scene Change SystemUI NewGUI"
(→Video Instructions) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | |||
===Description=== | ===Description=== | ||
| + | This guide will show how to setup the Scene Change IVS feature at the SystemUI with NewGUI | ||
===Prerequisites=== | ===Prerequisites=== | ||
| − | + | * Dahua device with Scene Change IVS feature | |
===Video Instructions=== | ===Video Instructions=== | ||
<embedvideo service="youtube">https://youtu.be/w0qpVs9mOgw</embedvideo> | <embedvideo service="youtube">https://youtu.be/w0qpVs9mOgw</embedvideo> | ||
| + | ===Step By Step Instructions=== | ||
| + | 1. From the Main Menu | ||
| + | |||
| + | Click Event | ||
| + | |||
| + | [[File:Scene_Change_-_SystemUI_New_-_1.jpg|500px]] | ||
| + | |||
| + | 2. Click Video Detection | ||
| + | |||
| + | [[File:Scene_Change_-_SystemUI_New_-_2.jpg|500px]] | ||
| + | |||
| + | 3. Click Scene Change | ||
| + | |||
| + | [[File:Scene_Change_-_SystemUI_New_-_3.jpg|500px]] | ||
| + | |||
| + | 4. Use the dropdown box to select the Channel | ||
| + | |||
| + | Click the Enable setting to enable the IVS feature | ||
| + | |||
| + | [[File:Scene_Change_-_SystemUI_New_-_4.jpg|500px]] | ||
| + | |||
| + | 5. Configure the desired parameters for alarm triggers (actions when the IVS rule is triggered) | ||
| + | |||
| + | [[File:Scene_Change_-_SystemUI_New_-_5.jpg|500px]] | ||
| + | |||
| + | 6. Click Apply to save all settings | ||
| − | + | [[File:Scene_Change_-_SystemUI_New_-_6.jpg|500px]] | |
Latest revision as of 18:44, 9 December 2019
Description
This guide will show how to setup the Scene Change IVS feature at the SystemUI with NewGUI
Prerequisites
- Dahua device with Scene Change IVS feature
Video Instructions
Step By Step Instructions
1. From the Main Menu
Click Event
2. Click Video Detection
3. Click Scene Change
4. Use the dropdown box to select the Channel
Click the Enable setting to enable the IVS feature
5. Configure the desired parameters for alarm triggers (actions when the IVS rule is triggered)
6. Click Apply to save all settings
