Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "FAQ/HDD/Check SMART HDD Status"
(→Instructions) |
|||
| Line 5: | Line 5: | ||
**Old WebUI | **Old WebUI | ||
**SmartPSS | **SmartPSS | ||
| − | **DSS Express | + | **DSS Express |
==Instructions== | ==Instructions== | ||
Latest revision as of 22:39, 1 April 2021
Contents
Check SMART HDD Status
About
- SMART Status cannot be checked from the following interfaces:
- New WebUI
- Old WebUI
- SmartPSS
- DSS Express
Instructions
SystemUI Old
Prerequisites
- Dahua recorder
- Hard drive installed in recorder
Video Instructions
Step by Step Instructions
1. From Live View right click then select Main Menu
2. Click System under the Info section
3. Click HDD
4. A list of installed drives will appear
Click the Hard Drive icon under the S.M.A.R.T. column next to the disk you want information for
5. The HDD's S.M.A.R.T. Info will be displayed
SystemUI New
Prerequisites
- Dahua recorder
- Hard drive installed in recorder
Video Instructions
Step by Step Instructions
1. From Live View right click and select Main Menu
2. Click Operation
3. Click Information
4. Click HDD tab
5. A list of installed drives will appear
Click the Hard Drive icon under the S.M.A.R.T. column next to the disk you want information for
Use the scroll bar at the bottom of the screen to view more columns
6. The HDD's S.M.A.R.T. Info will be displayed
