Difference between revisions of "PTZ/Instructions/RS485"

(→‎Description)
(→‎Hardware Setup)
 
(15 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
=RS485=
 
=RS485=
 
==Description==
 
==Description==
−
RS485 is a communication port which is based on coaxial cable. It can control the camera via back-end device when the information of RS485 is set in accordance with that of the back-end coding device.
+
RS485 is a communication port. It can control the camera via back-end device when the information of RS485 is set in accordance with that of the back-end coding device.
  
 
==Prerequisites==
 
==Prerequisites==
 +
* Dahua recorder with RS485 Port
 
==Instructions==
 
==Instructions==
−
==New Template==
+
*[[NKB1000_RS485_Setup|NKB1000 RS485 Setup]]
 +
*[[Access_Control/How_To_Wire_a_RS485_Reader|RS485 for Access Control]]
 +
*[[IPPTZ/Pelco_and_RS485|Pelco & RS485]]
 +
 
 +
==Common RS485 Settings==
 +
{| class="wikitable"
 +
!|Device
 +
!|Channel
 +
!|PTZ Type:
 +
!|Protocol
 +
!|Address
 +
!|Baud Rate
 +
!|Data Bit
 +
!|Stop Bit
 +
!|Parity
 +
|-
 +
|Dahua SD59230IN-HC
 +
|1
 +
|Local
 +
|Pelco-D
 +
|1
 +
|9600
 +
|8
 +
|1
 +
|None
 +
|-
 +
|Hikvision Analog PTZ
 +
|1
 +
|Local
 +
|Pelco-D
 +
|1
 +
|2400
 +
|8
 +
|1
 +
|None
 +
|}
 +
 
 +
==Hardware Setup==
 +
1. Connect the RS485 cable of the PTZ camera to the RS485 port on the Device. Ensure the match of A and B interfaces.
 +
 
 +
<gallery>
 +
File:RS485_Hardware_Setup_1.JPG|RS485 Port on Recorder, Wires connected to A and B
 +
File:RS485_Hardware_Setup_2.JPG|RS485 connection from PTZ, labeled for A (+) and B (-)
 +
File:RS485_Hardware_Setup_3.JPG|Wires connected from PTZ to recorder
 +
</gallery>
 +
 
 +
2. Connect the video out cable of the PTZ camera to the video input port on the Device.
 +
 
 +
3. Turn on the PTZ camera.
 +
 
 +
==Determine PTZ's Address, Baud, & Protocol==
 +
 
 +
'''Method 1: Reboot and View OSD'''
 +
 
 +
1. Connect Analog or HD-CVI PTZ to Channel 1.
 +
 
 +
2. Bring up Channel 1 Live View
 +
 
 +
3. Power cycle PTZ.
 +
 
 +
4. Wait for PTZ to boot, and watch Channel 1 for PTZ Info.
 +
<embedvideo service="youtube">https://www.youtube.com/watch?v=G0WaKEVi80U</embedvideo>
 +
 
 +
'''Method 2: Check Manufacturer's Manual or Specifications'''
 +
 
 +
==Configure Dahua Recorder==
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
[[File:Icon_for_type_SystemUI_Old.png|250px]]<span style="font-size:180%;">'''SystemUI Old'''</span>
 
[[File:Icon_for_type_SystemUI_Old.png|250px]]<span style="font-size:180%;">'''SystemUI Old'''</span>
−
<div class="mw-collapsible-content">{{Template:XXX_SystemUI_OldGUI}}</div>
+
<div class="mw-collapsible-content">{{Template:RS485_SystemUI_OldGUI}}</div>
 
</div>
 
</div>
  
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
[[File:Icon_for_type_SystemUI_New.png|250px]]<span style="font-size:180%;">'''SystemUI New'''</span>
 
[[File:Icon_for_type_SystemUI_New.png|250px]]<span style="font-size:180%;">'''SystemUI New'''</span>
−
<div class="mw-collapsible-content">{{Template:XXX_SystemUI_NewGUI}}</div>
+
<div class="mw-collapsible-content">{{Template:RS485_SystemUI_NewGUI}}</div>
 
</div>
 
</div>
  
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
[[File:Icon_for_type_WebUI_Old.png|250px]]<span style="font-size:180%;">'''WebUI Old'''</span>
 
[[File:Icon_for_type_WebUI_Old.png|250px]]<span style="font-size:180%;">'''WebUI Old'''</span>
−
<div class="mw-collapsible-content">{{Template:XXX_WebUI_Old}}</div>
+
<div class="mw-collapsible-content">{{Template:RS485_WebUI_Old}}</div>
 
</div>
 
</div>
  
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
[[File:Icon_for_type_WebUI_New.png|250px]]<span style="font-size:180%;">'''WebUI New'''</span>
 
[[File:Icon_for_type_WebUI_New.png|250px]]<span style="font-size:180%;">'''WebUI New'''</span>
−
<div class="mw-collapsible-content">{{Template:XXX_WebUI_New}}</div>
+
<div class="mw-collapsible-content">{{Template:RS485_WebUI_New}}</div>
 
</div>
 
</div>
  
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
 
[[File:Icon_for_type_SmartPSS.png|250px]]<span style="font-size:180%;">'''SmartPSS'''</span>
 
[[File:Icon_for_type_SmartPSS.png|250px]]<span style="font-size:180%;">'''SmartPSS'''</span>
−
<div class="mw-collapsible-content">{{Template:XXX__SmartPSS}}</div>
+
<div class="mw-collapsible-content">{{Template:RS485__SmartPSS}}</div>
−
</div>
 
−
 
 
−
<div class="toccolours mw-collapsible mw-collapsed">
 
−
[[File:Icon_for_type_DSS_Express_S.png|250px]]<span style="font-size:180%;">'''DSS Express S'''</span>
 
−
<div class="mw-collapsible-content">{{Template:XXX_DSS_Express}}</div>
 
−
</div>
 
−
 
 
−
<div class="toccolours mw-collapsible mw-collapsed">
 
−
[[File:DSS_Mobile2_Icon.jpg|150px]]<span style="font-size:180%;">'''DSS4004-S2 & DSS7016-S2'''</span>
 
−
<div class="mw-collapsible-content">{{Template:xxx_DSS_S2}}</div>
 
−
</div>
 
−
 
 
−
<div class="toccolours mw-collapsible mw-collapsed">
 
−
[[File:iDMSS_Plus_Icon2.jpg|150px]]<span style="font-size:180%;">'''Mobile:iDMSS Plus & gDMSS Plus '''</span>
 
−
<div class="mw-collapsible-content">{{Template:XXX_MobileUI_DMSS}}</div>
 
 
</div>
 
</div>

Latest revision as of 23:41, 24 January 2020

RS485

Description

RS485 is a communication port. It can control the camera via back-end device when the information of RS485 is set in accordance with that of the back-end coding device.

Prerequisites

  • Dahua recorder with RS485 Port

Instructions

Common RS485 Settings

Device Channel PTZ Type: Protocol Address Baud Rate Data Bit Stop Bit Parity
Dahua SD59230IN-HC 1 Local Pelco-D 1 9600 8 1 None
Hikvision Analog PTZ 1 Local Pelco-D 1 2400 8 1 None

Hardware Setup

1. Connect the RS485 cable of the PTZ camera to the RS485 port on the Device. Ensure the match of A and B interfaces.

  • RS485 Port on Recorder, Wires connected to A and B

  • RS485 connection from PTZ, labeled for A (+) and B (-)

  • Wires connected from PTZ to recorder

2. Connect the video out cable of the PTZ camera to the video input port on the Device.

3. Turn on the PTZ camera.

Determine PTZ's Address, Baud, & Protocol

Method 1: Reboot and View OSD

1. Connect Analog or HD-CVI PTZ to Channel 1.

2. Bring up Channel 1 Live View

3. Power cycle PTZ.

4. Wait for PTZ to boot, and watch Channel 1 for PTZ Info.

Method 2: Check Manufacturer's Manual or Specifications

Configure Dahua Recorder

Icon for type SystemUI Old.pngSystemUI Old

Prerequisites

  • Dahua recorder with RS485 port

Video Instructions

Step by Step Instructions

1. From Live View right click

Select Main Menu

RS485 - SystemUI Old - 1.jpg

2. Under Setting

Click Camera

RS485 - SystemUI Old - 2.jpg

3. Click System

RS485 - SystemUI Old - 3.jpg

4. Click PTZ

RS485 - SystemUI Old - 4.jpg

5. Use the dropdown box to select the Channel

RS485 - SystemUI Old - 5.jpg

6. Use the dropdown box to change PTZ Type to Local

RS485 - SystemUI Old - 6.jpg

7. Enter the desired settings for the RS485 communication

  • Protocol
  • Address
  • Baud Rate
  • Data Bit
  • Stop Bit
  • Parity

RS485 - SystemUI Old - 7.jpg

8. Click Apply then Save to save the settings

RS485 - SystemUI Old - 8.jpg

Icon for type SystemUI New.pngSystemUI New

Prerequisites

  • Dahua recorder with RS485 port

Video Instructions

Step by Step Instructions

1. From Live View right click

Select Main Menu

RS485 - SystemUI New - 1.jpg

2. Click Camera

RS485 - SystemUI New - 2.jpg

3. Click PTZ

RS485 - SystemUI New - 3.jpg

4. Use the dropdown box to select the Channel

RS485 - SystemUI New - 4.jpg

5. Use the dropdown box next to Control Mode to select Serial

RS485 - SystemUI New - 5.jpg

6. Enter the desired settings for the RS485 communication

  • Protocol
  • Address
  • Baud Rate
  • Data Bit
  • Stop Bit
  • Parity

RS485 - SystemUI New - 6.jpg

7. Click Apply to save the settings

RS485 - SystemUI New - 7.jpg

Icon for type WebUI Old.pngWebUI Old

Prerequisites

  • Dahua recorder with RS485 port
  • Network connection for recorder

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

RS485 - WebUI Old - 1.jpg

2. Click Setup

RS485 - WebUI Old - 2.jpg

3. Click System > PTZ

RS485 - WebUI Old - 3.jpg

4. Use the dropdown box to select the Channel

RS485 - WebUI Old - 4.jpg

5. Use the dropdown box next to PTZ Type to select Local

RS485 - WebUI Old - 5.jpg

6. Enter the desired settings for the RS485 communication

  • Protocol
  • Address
  • Baud Rate
  • Data Bit
  • Stop Bit
  • Parity

RS485 - WebUI Old - 6.jpg

7. Click OK to save settings

RS485 - WebUI Old - 7.jpg

Icon for type WebUI New.pngWebUI New

Prerequisites

  • Dahua recorder with RS485 port
  • Network connection for recorder

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

RS485 - WebUI New - 1.jpg

2. Click Management in the top left corner of the screen

Select Camera

RS485 - WebUI New - 2.jpg

3. Click PTZ

RS485 - WebUI New - 3.jpg

4. Use the dropdown box to select the Channel

RS485 - WebUI New - 4.jpg

5. Use the dropdown box next to PTZ Type to select Local

RS485 - WebUI New - 5.jpg

6. Enter the desired settings for the RS485 communication

  • Protocol
  • Address
  • Baud Rate
  • Data Bit
  • Stop Bit
  • Parity

RS485 - WebUI New - 6.jpg

7. Click OK to save settings

RS485 - WebUI New - 7.jpg

Icon for type SmartPSS.pngSmartPSS

Prerequisites

  • SmartPSS
  • Dahua recorder with RS485 port, added to SmartPSS

Video Instructions

Step by Step Instructions

1. From the Menu of SmartPSS

Click Device CFG

RS485 - SmartPSS - 1.jpg

2. Click to select the recorder from the Device Tree on the left side of the screen

RS485 - SmartPSS - 2.jpg

3. Click to expand the System section

RS485 - SmartPSS - 3.jpg

4. Click PTZ

RS485 - SmartPSS - 4.jpg

5. Use the dropdown to select the Channel

RS485 - SmartPSS - 5.jpg

6. Use the dropdown box next to PTZ Type to select Local

RS485 - SmartPSS - 6.jpg

7. Enter the desired settings for the RS485 communication

  • Protocol
  • Address
  • Baud Rate
  • Data Bit
  • Stop Bit
  • Parity

RS485 - SmartPSS - 7.jpg

8. Click Save to save settings

RS485 - SmartPSS - 8.jpg
Retrieved from "https://DahuaWiki.com/index.php?title=PTZ/Instructions/RS485&oldid=53411"