Difference between revisions of "Template:SMD WebUI Old"

Latest revision as of 18:22, 24 January 2020

1. Enter the username and password for the device

Click Login

2. Click Setting

3. Click Event > Video Detection

4. Check the box to enable the motion detection

Configure any additional motion detection parameters

5. Click Save

6. Click Event > Smart Motion Detection

7. Check the box to enable the Smart Motion Detection

8. Use the additional options to configure the parameters of SMD:

9. Click Save

@@ Line 1: / Line 1: @@
 ==Prerequisites==
+* Dahua device that supports SMD
 ==Video Instructions==
 <embedvideo service="youtube">https://youtu.be/FS83lrShTh4</embedvideo>
+==Step by Step Instructions==
+. Enter the username and password for the device
+Click Login
+[[File:SMD_-_WebUI_Old_-_1.jpg|600px]]
+. Click Setting
+[[File:SMD_-_WebUI_Old_-_2.jpg|600px]]
+. Click Event > Video Detection
+[[File:SMD_-_WebUI_Old_-_2-1.jpg|600px]]
-== How to Setup SMD using the WebUI Old ==
+. Check the box to enable the motion detection
-=== Prerequisites ===
-* WebUI Old.
+Configure any additional motion detection parameters
-. Login.
+[[File:SMD_-_WebUI_Old_-_2-2.jpg|600px]]
-<br>
-[[File:O_WUI1.JPG|400px]]
+. Click Save
-. Go to the "Setting" tab.
+[[File:SMD_-_WebUI_Old_-_2-3.jpg|600px]]
-<br>
-[[File:O_WUI2.JPG|400px]]
-. Go to motion detection tab, Even
+. Click Event > Smart Motion Detection
-==Step by Step Instructions==
+[[File:SMD_-_WebUI_Old_-_3.jpg|600px]]
+. Check the box to enable the Smart Motion Detection
+[[File:SMD_-_WebUI_Old_-_4.jpg|600px]]
+. Use the additional options to configure the parameters of SMD:
+* Effective Target - Human, Vehicle, or Both
+* Sensitivity
+[[File:SMD_-_WebUI_Old_-_5.jpg|600px]]
+. Click Save
+[[File:SMD_-_WebUI_Old_-_6.jpg|600px]]