Difference between revisions of "Template:Alarm Out WebUI New"

 
Line 10: Line 10:
 
2. Go to Alarm
 
2. Go to Alarm
  
[[File:Alarm OutNWUI-1.png|700px]]
+
[[File:Alarm OutNWUI-2.png|700px]]
  
 
3. Select Alarm Output on the left menu and enable the relay the buzzer is wired to
 
3. Select Alarm Output on the left menu and enable the relay the buzzer is wired to
  
[[File:Alarm OutNWUI-1.png|700px]]
+
[[File:Alarm OutNWUI-3.png|700px]]
  
 
4. Select Video detection on the left menu. Enable Motion Detection and go to Alarm Out settings.  
 
4. Select Video detection on the left menu. Enable Motion Detection and go to Alarm Out settings.  
  
[[File:Alarm OutNWUI-1.png|700px]]
+
[[File:Alarm OutNWUI-4.png|700px]]
  
 
5. Check the General Alarm box and select the relay to enable. Click on OK
 
5. Check the General Alarm box and select the relay to enable. Click on OK
  
[[File:Alarm OutNWUI-1.png|700px]]
+
[[File:Alarm OutNWUI-5.png|700px]]
  
 
6. Click on OK to save and finalize the settings
 
6. Click on OK to save and finalize the settings
  
[[File:Alarm OutNWUI-1.png|700px]]
+
[[File:Alarm OutNWUI-6.png|700px]]

Latest revision as of 17:52, 6 February 2020

Prerequisites

Video Instructions

Step by Step Instructions

1. Login to the WEBUI

Alarm OutNWUI-1.png

2. Go to Alarm

Alarm OutNWUI-2.png

3. Select Alarm Output on the left menu and enable the relay the buzzer is wired to

Alarm OutNWUI-3.png

4. Select Video detection on the left menu. Enable Motion Detection and go to Alarm Out settings.

Alarm OutNWUI-4.png

5. Check the General Alarm box and select the relay to enable. Click on OK

Alarm OutNWUI-5.png

6. Click on OK to save and finalize the settings

Alarm OutNWUI-6.png