Difference between revisions of "Template:Motion Record SmartPSS"

 
(4 intermediate revisions by the same user not shown)
Line 4: Line 4:
 
===Prerequisites===
 
===Prerequisites===
 
* SmartPSS 2.0
 
* SmartPSS 2.0
−
* HDD installed on Recording Device
+
* Dahua recorder (with camera added) added to SmartPSS
−
 
 
 
===Video Instructions===
 
===Video Instructions===
 
<embedvideo service="youtube">https://youtu.be/wIgTOka8R-g</embedvideo>
 
<embedvideo service="youtube">https://youtu.be/wIgTOka8R-g</embedvideo>
 
===Step By Step Instructions===
 
===Step By Step Instructions===
−
1. From the Main Menu Select "Device CFG" (Device Configuration).
+
1. Open and login to SmartPSS
 +
 
 +
[[file:alarmsmartpss2_0.png|600px]]
 +
 
 +
From the Menu of SmartPSS
 +
 
 +
Click Device CFG
 +
 
 +
[[file:alarmsmartpss2_01.png|600px]]
 +
 
 +
2. Select the device from the list on the left
 +
 
 +
[[File:Motion_-_SmartPSS_-_1.jpg|600px]]
 +
 
 +
3. Click Event
 +
 
 +
[[File:Motion_-_SmartPSS_-_2.jpg|600px]]
 +
 
 +
4. Click Video Detect
 +
 
 +
[[File:Motion_-_SmartPSS_-_3.jpg|600px]]
 +
 
 +
5. Under Motion Detect
 +
 
 +
Use the dropdown box to select the Channel
 +
 
 +
Check the box to enable Motion Detect
 +
 
 +
[[File:Motion_-_SmartPSS_-_4.jpg|600px]]
 +
 
 +
6. Use the interface to set the parameters for the Motion Detection:
 +
 
 +
* Arm/Disarm Period - set a schedule for motion record
 +
* Zone - set specific areas in the camera's video for motion detection
 +
 
 +
[[File:Motion_-_SmartPSS_-_5.jpg|600px]]
 +
 
 +
7. Check the box next to Record Channel, select the channel(s) you wish to record when Motion is detected
 +
 
 +
[[File:Motion_-_SmartPSS_-_6.jpg|600px]]
 +
 
 +
8. Click Save
 +
 
 +
[[File:Motion_-_SmartPSS_-_7.jpg|600px]]
 +
 
 +
9. Click Storage
 +
 
 +
[[File:Motion_-_SmartPSS_-_8.jpg|600px]]
 +
 
 +
10. Click Schedule
 +
 
 +
[[File:Motion_-_SmartPSS_-_9.jpg|600px]]
  
−
[[file:SmartP2shedule1.png|600px]]
+
11. Use the dropdown box to select the Channel
  
−
2. From the left hand side select the device the scheduled recording is to be set for.
+
[[File:Motion_-_SmartPSS_-_10.jpg|600px]]
  
−
[[file:SmartP2shedule2.png|600px]]
+
12. Click the icon next to the schedule to edit
  
−
3. Select "Event" -> Select "Video Detect".
+
[[File:Motion_-_SmartPSS_-_11.jpg|600px]]
  
−
[[File:Smart2MotionRec1.png|600px]]
+
13. Use the interface to create the desired schedule for Motion Detection, making sure to enable/check 'MD' for Motion Detection
  
−
4. Select and choose channel -> Check mark the enable box to turn on motion detection -> Select "Set" to set an Arm/Disarm Period.
+
[[File:Motion_-_SmartPSS_-_12.jpg|600px]]
  
−
[[File:Smart2MotionRec2.png|600px]]
+
Check the box next to which days to add to the schedule
  
−
5. Select the settings icon -> Check mark the period -> Select the days that Motion detection is to be armed/disarmed -> Select save -> Select Save.
+
Click Save
  
−
[[File:Smart2MotionRec3.png|600px]]
+
[[File:Motion_-_SmartPSS_-_13.jpg|600px]]
  
−
6. Check mark "Record Channel" and select channel/channels it is to be set for -> you can copy the configuration to another channel or all channels -> Select "Apply" and "Save".
+
14. The schedule will be updated with the changes
  
−
[[File:Smart2MotionRec4.png|600px]]
+
Click Save
  
−
7. Setting a record schedule is required for motion event recordings. Select "Storage" -> Select "Schedule"
+
[[File:Motion_-_SmartPSS_-_14.jpg|600px]]
  
−
[[File:Smart2MotionRec5.png|600px]]
+
15. Click Record
  
−
8. Select channel -> Select settings icon.
+
[[File:Motion_-_SmartPSS_-_15.jpg|600px]]
  
−
[[File:Smart2MotionRec6.png|600px]]
+
16. Use the dropdown box to select the Channel
  
−
9. For this tutorial we are only setting one period. Check mark Motion (Motion Detection) -> Select Day or days motion is to be recorded -> Select "Save" to save recordings.
+
Select 'Auto' for each stream type you wish to record
  
−
[[File:Smart2MotionRec7.png|600px]]
+
[[File:Motion_-_SmartPSS_-_16.jpg|600px]]
  
−
10. Here you see yellow for the days depending on the days motion was set for from the previous step. Yellow represents motion detection. You may copy the configuration to all or another channel -> Select "Apply" and "Save" to save configuration.
+
17. Click Save
  
−
[[File:Smart2MotionRec8.png|600px]]
+
[[File:Motion_-_SmartPSS_-_17.jpg|600px]]

Latest revision as of 01:08, 7 February 2020

How To Setup Motion Record

Prerequisites

  • SmartPSS 2.0
  • Dahua recorder (with camera added) added to SmartPSS

Video Instructions

Step By Step Instructions

1. Open and login to SmartPSS

Alarmsmartpss2 0.png

From the Menu of SmartPSS

Click Device CFG

Alarmsmartpss2 01.png

2. Select the device from the list on the left

Motion - SmartPSS - 1.jpg

3. Click Event

Motion - SmartPSS - 2.jpg

4. Click Video Detect

Motion - SmartPSS - 3.jpg

5. Under Motion Detect

Use the dropdown box to select the Channel

Check the box to enable Motion Detect

Motion - SmartPSS - 4.jpg

6. Use the interface to set the parameters for the Motion Detection:

  • Arm/Disarm Period - set a schedule for motion record
  • Zone - set specific areas in the camera's video for motion detection

Motion - SmartPSS - 5.jpg

7. Check the box next to Record Channel, select the channel(s) you wish to record when Motion is detected

Motion - SmartPSS - 6.jpg

8. Click Save

Motion - SmartPSS - 7.jpg

9. Click Storage

Motion - SmartPSS - 8.jpg

10. Click Schedule

Motion - SmartPSS - 9.jpg

11. Use the dropdown box to select the Channel

Motion - SmartPSS - 10.jpg

12. Click the icon next to the schedule to edit

Motion - SmartPSS - 11.jpg

13. Use the interface to create the desired schedule for Motion Detection, making sure to enable/check 'MD' for Motion Detection

Motion - SmartPSS - 12.jpg

Check the box next to which days to add to the schedule

Click Save

Motion - SmartPSS - 13.jpg

14. The schedule will be updated with the changes

Click Save

Motion - SmartPSS - 14.jpg

15. Click Record

Motion - SmartPSS - 15.jpg

16. Use the dropdown box to select the Channel

Select 'Auto' for each stream type you wish to record

Motion - SmartPSS - 16.jpg

17. Click Save

Motion - SmartPSS - 17.jpg

Retrieved from "https://DahuaWiki.com/index.php?title=Template:Motion_Record_SmartPSS&oldid=54549"