Difference between revisions of "Template:Initial Setup SystemUI NewGUI"

(Created page with " ==Prerequisites== *Dahua Recorder: NVR, DVR, or XVR ==Video Instructions== <embedvideo service="youtube">Coming Soon</embedvideo> ==Step by Step Instructions== 1. Connect the...")
 
 
(3 intermediate revisions by 2 users not shown)
Line 3: Line 3:
 
*Dahua Recorder: NVR, DVR, or XVR
 
*Dahua Recorder: NVR, DVR, or XVR
 
==Video Instructions==
 
==Video Instructions==
−
<embedvideo service="youtube">Coming Soon</embedvideo>
+
<embedvideo service="youtube">https://youtu.be/c1dcTLenIVw</embedvideo>
 +
 
 
==Step by Step Instructions==
 
==Step by Step Instructions==
 
1. Connect the NVR to the display and power it on.
 
1. Connect the NVR to the display and power it on.
 +
 +
Use the dropdown boxes to select
 +
 +
Location
 +
Language
 +
Video Standard
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_1.jpg|600px]]
 +
 +
Click Next
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_2.jpg|600px]]
 +
 +
2. The Software License Agreement window will appear.
 +
 +
Use the scroll bar to review the agreement and check the box to agree
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_3.jpg|600px]]
 +
 +
Click Next
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_4.jpg|600px]]
 +
 +
3. Use the dropdown box to select the Time Zone
 +
 +
Click Next
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_5.jpg|600px]]
 +
 +
4. Use the interface to create a password for the admin account
 +
 +
The password must be 8 to 32 characters, including at least two of the following categories: numbers, uppercase letters, lowercase letters and special characters (Characters like '";:& cannot be included)
 +
 +
Enter the password twice
 +
 +
Enter a Password Hint
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_6.jpg|600px]]
 +
 +
Click Next
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_7.jpg|600px]]
 +
 +
5. Use the interface to create a Device Unlock Pattern. This is another method of logging into the device. You can click Skip to skip this part of the setup.
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_8.jpg|600px]]
 +
 +
Draw the pattern again to confirm
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_9.jpg|600px]]
 +
 +
6. Use the interface to setup Password Recovery for the device in case the password is lost or forgotten
 +
 +
Click to enable the Email Recovery feature, then enter an email address that will be used in case of a password reset
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_10.jpg|600px]]
 +
 +
7. Use the interface to select and enter Security Questions for the password recovery function
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_11.jpg|600px]]
 +
 +
Click OK
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_12.jpg|600px]]
 +
 +
8. Check to enable or disable 'Auto Check for Updates"
 +
 +
Click Next
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_13.jpg|600px]]
 +
 +
9. Use the interface to set Basic settings
 +
 +
Click Next
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_14.jpg|600px]]
 +
 +
10. Use the interface to set the Date & Time for the device
 +
 +
Click Next
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_15.jpg|600px]]
 +
 +
11. Use the interface to create any required Holiday dates for the schedule
 +
 +
Click Next
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_16.jpg|600px]]
 +
 +
12. Use the interface to set the Network
 +
 +
Click the pencil next to the NIC card to modify the settings
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_17.jpg|600px]]
 +
 +
13. Use the interface to select the desired network settings
 +
 +
Click OK
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_18.jpg|600px]]
 +
 +
Click Next
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_19.jpg|600px]]
 +
 +
14. Use the interface to enable or disable the P2P function.
 +
 +
Click Next
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_20.jpg|600px]]
 +
 +
15. Use the interface to add Cameras to the system.
 +
 +
Cameras can be added via Manual Add or use Search Device to find cameras on the local network
 +
 +
Click Next to proceed
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_21.jpg|600px]]
 +
 +
16. Use the interface to create the Record schedule for the device
 +
 +
Click the gear icon next to a day to adjust the time periods of the schedule
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_22.jpg|600px]]
 +
 +
17. Use the interface to create the desired recording schedule and select the record type
 +
 +
Select which days to apply the schedule to
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_23.jpg|600px]]
 +
 +
18. Click OK
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_24.jpg|600px]]
 +
 +
19. The schedule will be updated.
 +
 +
Click Next to proceed
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_25.jpg|600px]]
 +
 +
20. Use the interface to create the schedule for Snapshot recording the same way it was configured in the previous step
 +
 +
Click OK
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_26.jpg|600px]]
 +
 +
21. A prompt will appear as the final step
 +
 +
Click OK
 +
 +
The device has now been initialized and setup with basic settings ready for further advanced configuration.
 +
 +
[[File:Initial_Setup_-_SystemUI_New_-_27.jpg|600px]]

Latest revision as of 17:55, 10 March 2020

Prerequisites

  • Dahua Recorder: NVR, DVR, or XVR

Video Instructions

Step by Step Instructions

1. Connect the NVR to the display and power it on.

Use the dropdown boxes to select

Location Language Video Standard

Initial Setup - SystemUI New - 1.jpg

Click Next

Initial Setup - SystemUI New - 2.jpg

2. The Software License Agreement window will appear.

Use the scroll bar to review the agreement and check the box to agree

Initial Setup - SystemUI New - 3.jpg

Click Next

Initial Setup - SystemUI New - 4.jpg

3. Use the dropdown box to select the Time Zone

Click Next

Initial Setup - SystemUI New - 5.jpg

4. Use the interface to create a password for the admin account

The password must be 8 to 32 characters, including at least two of the following categories: numbers, uppercase letters, lowercase letters and special characters (Characters like '";:& cannot be included)

Enter the password twice

Enter a Password Hint

Initial Setup - SystemUI New - 6.jpg

Click Next

Initial Setup - SystemUI New - 7.jpg

5. Use the interface to create a Device Unlock Pattern. This is another method of logging into the device. You can click Skip to skip this part of the setup.

Initial Setup - SystemUI New - 8.jpg

Draw the pattern again to confirm

Initial Setup - SystemUI New - 9.jpg

6. Use the interface to setup Password Recovery for the device in case the password is lost or forgotten

Click to enable the Email Recovery feature, then enter an email address that will be used in case of a password reset

Initial Setup - SystemUI New - 10.jpg

7. Use the interface to select and enter Security Questions for the password recovery function

Initial Setup - SystemUI New - 11.jpg

Click OK

Initial Setup - SystemUI New - 12.jpg

8. Check to enable or disable 'Auto Check for Updates"

Click Next

Initial Setup - SystemUI New - 13.jpg

9. Use the interface to set Basic settings

Click Next

Initial Setup - SystemUI New - 14.jpg

10. Use the interface to set the Date & Time for the device

Click Next

Initial Setup - SystemUI New - 15.jpg

11. Use the interface to create any required Holiday dates for the schedule

Click Next

Initial Setup - SystemUI New - 16.jpg

12. Use the interface to set the Network

Click the pencil next to the NIC card to modify the settings

Initial Setup - SystemUI New - 17.jpg

13. Use the interface to select the desired network settings

Click OK

Initial Setup - SystemUI New - 18.jpg

Click Next

Initial Setup - SystemUI New - 19.jpg

14. Use the interface to enable or disable the P2P function.

Click Next

Initial Setup - SystemUI New - 20.jpg

15. Use the interface to add Cameras to the system.

Cameras can be added via Manual Add or use Search Device to find cameras on the local network

Click Next to proceed

Initial Setup - SystemUI New - 21.jpg

16. Use the interface to create the Record schedule for the device

Click the gear icon next to a day to adjust the time periods of the schedule

Initial Setup - SystemUI New - 22.jpg

17. Use the interface to create the desired recording schedule and select the record type

Select which days to apply the schedule to

Initial Setup - SystemUI New - 23.jpg

18. Click OK

Initial Setup - SystemUI New - 24.jpg

19. The schedule will be updated.

Click Next to proceed

Initial Setup - SystemUI New - 25.jpg

20. Use the interface to create the schedule for Snapshot recording the same way it was configured in the previous step

Click OK

Initial Setup - SystemUI New - 26.jpg

21. A prompt will appear as the final step

Click OK

The device has now been initialized and setup with basic settings ready for further advanced configuration.

Initial Setup - SystemUI New - 27.jpg

Retrieved from "https://DahuaWiki.com/index.php?title=Template:Initial_Setup_SystemUI_NewGUI&oldid=59445"