Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Template:Fire Warning WebUI New"
(2 intermediate revisions by the same user not shown) | |||
Line 38: | Line 38: | ||
[[File:Fire_Warning_Setup_-_WebUI_-_5.jpg|500px]] | [[File:Fire_Warning_Setup_-_WebUI_-_5.jpg|500px]] | ||
− | 7. | + | 7. Configure the desired Alarm Parameters for a Fire Warning Event: |
− | |||
− | |||
− | |||
+ | {{Template:Alarm_Parameters_IPC}} | ||
+ | [[File:Fire_Warning_Setup_-_WebUI_-_6.jpg|500px]] | ||
− | + | 8. Click '''Save''' | |
[[File:Fire_Warning_Setup_-_WebUI_-_7.jpg|500px]] | [[File:Fire_Warning_Setup_-_WebUI_-_7.jpg|500px]] |
Latest revision as of 23:37, 8 April 2020
Video Instructions
Step by Step Instructions
1. Enter the IP of the device into a browser (default 192.168.1.108)
At the Web Login
Enter the Username and Password
Click Login
2. Click Setting
3. Click Smart Thermal > Fire Warning
4. Check the box to Enable
5. Select the desired Fire Warning mode:
- Anti-jamming: The camera will only detect those objects that are newly high temperature and send off alarms. That means under Anti-jamming mode, a constantly high-temperature object (a boiler/water heater, for example) is excluded
- High Response: The camera will detect any hidden fire danger and send off alarm
6. Region settings
Select a color in Each color represents a certain area which you can draw with your left mouse button. You can also give a name to the area you have drawn and set it's sensitivity.
The larger the sensitivity is, the easier a fire will be triggered.
7. Configure the desired Alarm Parameters for a Fire Warning Event:
Alarm Parameters (Click to expand)
Parameter | Description |
---|---|
Period | Define a period during which the alarm settings are active. |
Duration | The shortest time from placing an object in the detection area to an alarm is triggered |
Record | Enable this function and alarm recording will be triggered when there is an alarm |
Record Delay | Set a length of time for the Device to delay turning off recording after an alarm is ended. |
Relay-out | You can connect this relay-out port to such alarm devices as light and siren. When an alarm is triggered, those alarm devices will work. |
Alarm Delay | Set a length of time for the Device to delay turning off alarm after an event is actually complete |
Send Email | Select the Send Email check box and an e-mail will be delivered to the device user once an alarm is triggered |
PTZ | Select the check box of PTZ and select an item from None, Preset, Tour, and Pattern in the Activation bar.
Once an alarm is triggered, the PTZ will execute the item you have selected in the Activation bar |
Snapshot | Select the Snapshot check box to take a snapshot when there is an alarm. |
8. Click Save