Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/Temperature Monitoring/Initial NVR Setup"
(→Video Instructions) |
(→Description) |
||
| (22 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
=Temperature Monitoring Solution Initial NVR Setup= | =Temperature Monitoring Solution Initial NVR Setup= | ||
__NOTOC__ | __NOTOC__ | ||
| + | ==Description== | ||
| + | This guide will cover the initial NVR Setup for the [[Thermal/Temperature Monitoring|Thermal Temperature Monitoring Solution]] including device initialization, firmware update , factory defaulting, and setting Network information | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
==Prerequisites== | ==Prerequisites== | ||
* [[USA/NVR/Intelligent/DHI-NVR5216-16P-I|DHI-NVR5216-16P-I]] powered and connected to network | * [[USA/NVR/Intelligent/DHI-NVR5216-16P-I|DHI-NVR5216-16P-I]] powered and connected to network | ||
| − | + | * Latest firmware for NVR (see below) | |
==Temperature Monitoring Solution Firmware== | ==Temperature Monitoring Solution Firmware== | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 24: | Line 19: | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
| − | + | ===Device Initialization=== | |
| + | |||
| + | |||
| + | |||
| + | <gallery> | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_1.jpg|Enter the IP address of the NVR - default 192.168.1.108 in Internet Explorer on a local computer | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_2.jpg|Select the Region, Language and Video Standard. Click '''Next''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_3.jpg|Scroll down to review the agreement and check to confirm. | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_4.jpg|Click '''Next''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_5.jpg|Select the Time Zone and confirm the System Time. Click '''Next''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_6.jpg|Create a password for the device and enter twice to confirm. Click '''Next''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_7.jpg|Select which Password Protection feature(s) you wish to enable. Click '''OK''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_8.jpg|A prompt will confirm a successful initialization | ||
| + | </gallery> | ||
| + | |||
| + | ===Confirm/Upgrade NVR Firmware=== | ||
| + | <gallery> | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_9.jpg|Enter the password and click '''Login''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_10.jpg|Click '''Operation''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_11.jpg|Click Information > Version. System Version will show the current firmware version of the NVR. | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_11-1.jpg|Compare the Build Date to the firmware file downloaded. If the Build Date matches that date the system is up to date. | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_12.jpg|Click '''System Maintain''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_13.jpg|Click the '''Upgrade''' tab. Click '''Browse''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_14.jpg|Select the firmware file that was downloaded. Click '''Open''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_15.jpg|Click '''Upgrade''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_16.jpg|A prompt will appear to confirm the unit is upgrading | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_17.jpg|A prompt will appear to confirm the unit is rebooting after upgrading | ||
| + | </gallery> | ||
| + | |||
| + | ===Factory Default=== | ||
| + | '''''Resetting the device to Factory Default is recommended after upgrading the Firmware.''''' | ||
| + | <gallery> | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_18.jpg|Enter the password and click '''Login''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_19.jpg|Click '''Operation''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_20.jpg|Click Information > Version. System Version will show the current firmware version of the NVR. | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_21.jpg|Compare the Build Date to the firmware file downloaded. If the Build Date matches that date the system is up to date. | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_22.jpg|Click '''System Maintain''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_23.jpg|Click the '''Upgrade''' tab. Click '''Browse''' | ||
| + | </gallery> | ||
| − | 1. | + | ===Edit Network (TCP/IP) Information=== |
| + | '''''Change the recorder from the default IP - 192.168.1.108 - and edit Full Network information for the NVR''''' | ||
| + | <gallery> | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_24.jpg|Click '''Management''' > '''Network''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_25.jpg|Click TCP/IP. Click the Pencil icon under '''Edit''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_26.jpg|Select Static or DHCP for Network mode | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_27.jpg|Click '''Next''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_28.jpg|Enter Network information. Click '''OK''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_29.jpg|Click '''OK''' | ||
| + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_30.jpg|A prompt will confirm the IP Address change | ||
| + | </gallery> | ||
Latest revision as of 23:03, 5 May 2020
Temperature Monitoring Solution Initial NVR Setup
Description
This guide will cover the initial NVR Setup for the Thermal Temperature Monitoring Solution including device initialization, firmware update , factory defaulting, and setting Network information
Prerequisites
- DHI-NVR5216-16P-I powered and connected to network
- Latest firmware for NVR (see below)
Temperature Monitoring Solution Firmware
| NVR Model | Firmware |
|---|---|
| DHI-NVR5216-16P-I | |
Video Instructions
Step by Step Instructions
Device Initialization
Enter the IP address of the NVR - default 192.168.1.108 in Internet Explorer on a local computer
Select the Region, Language and Video Standard. Click Next
Scroll down to review the agreement and check to confirm.
Click Next
Select the Time Zone and confirm the System Time. Click Next
Create a password for the device and enter twice to confirm. Click Next
Select which Password Protection feature(s) you wish to enable. Click OK
A prompt will confirm a successful initialization
Confirm/Upgrade NVR Firmware
Enter the password and click Login
Click Operation
Click Information > Version. System Version will show the current firmware version of the NVR.
Compare the Build Date to the firmware file downloaded. If the Build Date matches that date the system is up to date.
Click System Maintain
Click the Upgrade tab. Click Browse
Select the firmware file that was downloaded. Click Open
Click Upgrade
A prompt will appear to confirm the unit is upgrading
A prompt will appear to confirm the unit is rebooting after upgrading
Factory Default
Resetting the device to Factory Default is recommended after upgrading the Firmware.
Enter the password and click Login
Click Operation
Click Information > Version. System Version will show the current firmware version of the NVR.
Compare the Build Date to the firmware file downloaded. If the Build Date matches that date the system is up to date.
Click System Maintain
Click the Upgrade tab. Click Browse
Edit Network (TCP/IP) Information
Change the recorder from the default IP - 192.168.1.108 - and edit Full Network information for the NVR
Click Management > Network
Click TCP/IP. Click the Pencil icon under Edit
Select Static or DHCP for Network mode
Click Next
Enter Network information. Click OK
Click OK
A prompt will confirm the IP Address change
