Difference between revisions of "Thermal/Temperature Monitoring/Initial NVR Setup"

(→‎Confirm/Upgrade NVR Firmware)
(→‎Description)
 
(9 intermediate revisions by the same user not shown)
Line 2: Line 2:
 
__NOTOC__
 
__NOTOC__
 
==Description==
 
==Description==
−
This guide will cover the initial NVR Setup for the [[Thermal/Temperature Monitoring|Thermal Temperature Monitoring Solution]] including device initialization, firmware update and factory default
+
This guide will cover the initial NVR Setup for the [[Thermal/Temperature Monitoring|Thermal Temperature Monitoring Solution]] including device initialization, firmware update , factory defaulting, and setting Network information
 +
 
 
==Prerequisites==
 
==Prerequisites==
 
* [[USA/NVR/Intelligent/DHI-NVR5216-16P-I|DHI-NVR5216-16P-I]] powered and connected to network
 
* [[USA/NVR/Intelligent/DHI-NVR5216-16P-I|DHI-NVR5216-16P-I]] powered and connected to network
Line 34: Line 35:
  
 
===Confirm/Upgrade NVR Firmware===
 
===Confirm/Upgrade NVR Firmware===
 +
<gallery>
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_9.jpg|Enter the password and click '''Login'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_10.jpg|Click '''Operation'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_11.jpg|Click Information > Version. System Version will show the current firmware version of the NVR.
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_11-1.jpg|Compare the Build Date to the firmware file downloaded. If the Build Date matches that date the system is up to date.
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_12.jpg|Click '''System Maintain'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_13.jpg|Click the '''Upgrade''' tab. Click '''Browse'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_14.jpg|Select the firmware file that was downloaded. Click '''Open'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_15.jpg|Click '''Upgrade'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_16.jpg|A prompt will appear to confirm the unit is upgrading
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_17.jpg|A prompt will appear to confirm the unit is rebooting after upgrading
 +
</gallery>
  
−
[[File:Temperature_Monitoring_-_Initial_NVR_Setup_-_9.jpg]]
+
===Factory Default===
−
 
+
'''''Resetting the device to Factory Default is recommended after upgrading the Firmware.'''''
−
[[File:Temperature_Monitoring_-_Initial_NVR_Setup_-_10.jpg]]
+
<gallery>
−
 
+
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_18.jpg|Enter the password and click '''Login'''
−
[[File:Temperature_Monitoring_-_Initial_NVR_Setup_-_11.jpg]]
+
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_19.jpg|Click '''Operation'''
−
 
+
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_20.jpg|Click Information > Version. System Version will show the current firmware version of the NVR.
−
[[File:Temperature_Monitoring_-_Initial_NVR_Setup_-_11-1.jpg]]
+
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_21.jpg|Compare the Build Date to the firmware file downloaded. If the Build Date matches that date the system is up to date.
−
 
+
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_22.jpg|Click '''System Maintain'''
−
[[File:Temperature_Monitoring_-_Initial_NVR_Setup_-_12.jpg]]
+
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_23.jpg|Click the '''Upgrade''' tab. Click '''Browse'''
−
 
+
</gallery>
−
[[File:Temperature_Monitoring_-_Initial_NVR_Setup_-_13.jpg]]
 
  
 
===Edit Network (TCP/IP) Information===
 
===Edit Network (TCP/IP) Information===
 +
'''''Change the recorder from the default IP - 192.168.1.108 - and edit Full Network information for the NVR'''''
 +
<gallery>
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_24.jpg|Click '''Management''' > '''Network'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_25.jpg|Click TCP/IP. Click the Pencil icon under '''Edit'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_26.jpg|Select Static or DHCP for Network mode
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_27.jpg|Click '''Next'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_28.jpg|Enter Network information. Click '''OK'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_29.jpg|Click '''OK'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_30.jpg|A prompt will confirm the IP Address change
 +
</gallery>

Latest revision as of 23:03, 5 May 2020

Temperature Monitoring Solution Initial NVR Setup

Description

This guide will cover the initial NVR Setup for the Thermal Temperature Monitoring Solution including device initialization, firmware update , factory defaulting, and setting Network information

Prerequisites

  • DHI-NVR5216-16P-I powered and connected to network
  • Latest firmware for NVR (see below)

Temperature Monitoring Solution Firmware

NVR Model Firmware
DHI-NVR5216-16P-I

Video Instructions

Step by Step Instructions

Device Initialization

  • Enter the IP address of the NVR - default 192.168.1.108 in Internet Explorer on a local computer

  • Select the Region, Language and Video Standard. Click Next

  • Scroll down to review the agreement and check to confirm.

  • Click Next

  • Select the Time Zone and confirm the System Time. Click Next

  • Create a password for the device and enter twice to confirm. Click Next

  • Select which Password Protection feature(s) you wish to enable. Click OK

  • A prompt will confirm a successful initialization

Confirm/Upgrade NVR Firmware

  • Enter the password and click Login

  • Click Operation

  • Click Information > Version. System Version will show the current firmware version of the NVR.

  • Compare the Build Date to the firmware file downloaded. If the Build Date matches that date the system is up to date.

  • Click System Maintain

  • Click the Upgrade tab. Click Browse

  • Select the firmware file that was downloaded. Click Open

  • Click Upgrade

  • A prompt will appear to confirm the unit is upgrading

  • A prompt will appear to confirm the unit is rebooting after upgrading

Factory Default

Resetting the device to Factory Default is recommended after upgrading the Firmware.

  • Enter the password and click Login

  • Click Operation

  • Click Information > Version. System Version will show the current firmware version of the NVR.

  • Compare the Build Date to the firmware file downloaded. If the Build Date matches that date the system is up to date.

  • Click System Maintain

  • Click the Upgrade tab. Click Browse

Edit Network (TCP/IP) Information

Change the recorder from the default IP - 192.168.1.108 - and edit Full Network information for the NVR

  • Click Management > Network

  • Click TCP/IP. Click the Pencil icon under Edit

  • Select Static or DHCP for Network mode

  • Click Next

  • Enter Network information. Click OK

  • Click OK

  • A prompt will confirm the IP Address change

Retrieved from "https://DahuaWiki.com/index.php?title=Thermal/Temperature_Monitoring/Initial_NVR_Setup&oldid=62653"