Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Difference between revisions of "Thermal/Temperature Monitoring/Initial NVR Setup"

(Confirm/Upgrade NVR Firmware)
(Description)
 
(5 intermediate revisions by the same user not shown)
Line 2: Line 2:
 
__NOTOC__
 
__NOTOC__
 
==Description==
 
==Description==
This guide will cover the initial NVR Setup for the [[Thermal/Temperature Monitoring|Thermal Temperature Monitoring Solution]] including device initialization, firmware update , factory defaulting, and settign Network information
+
This guide will cover the initial NVR Setup for the [[Thermal/Temperature Monitoring|Thermal Temperature Monitoring Solution]] including device initialization, firmware update , factory defaulting, and setting Network information
  
 
==Prerequisites==
 
==Prerequisites==
Line 46: Line 46:
 
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_16.jpg|A prompt will appear to confirm the unit is upgrading
 
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_16.jpg|A prompt will appear to confirm the unit is upgrading
 
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_17.jpg|A prompt will appear to confirm the unit is rebooting after upgrading
 
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_17.jpg|A prompt will appear to confirm the unit is rebooting after upgrading
 +
</gallery>
 +
 +
===Factory Default===
 +
'''''Resetting the device to Factory Default is recommended after upgrading the Firmware.'''''
 +
<gallery>
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_18.jpg|Enter the password and click '''Login'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_19.jpg|Click '''Operation'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_20.jpg|Click Information > Version. System Version will show the current firmware version of the NVR.
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_21.jpg|Compare the Build Date to the firmware file downloaded. If the Build Date matches that date the system is up to date.
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_22.jpg|Click '''System Maintain'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_23.jpg|Click the '''Upgrade''' tab. Click '''Browse'''
 
</gallery>
 
</gallery>
  
 
===Edit Network (TCP/IP) Information===
 
===Edit Network (TCP/IP) Information===
 +
'''''Change the recorder from the default IP - 192.168.1.108 - and edit Full Network information for the NVR'''''
 +
<gallery>
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_24.jpg|Click '''Management''' > '''Network'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_25.jpg|Click TCP/IP. Click the Pencil icon under '''Edit'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_26.jpg|Select Static or DHCP for Network mode
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_27.jpg|Click '''Next'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_28.jpg|Enter Network information. Click '''OK'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_29.jpg|Click '''OK'''
 +
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_30.jpg|A prompt will confirm the IP Address change
 +
</gallery>

Latest revision as of 23:03, 5 May 2020

Temperature Monitoring Solution Initial NVR Setup

Description

This guide will cover the initial NVR Setup for the Thermal Temperature Monitoring Solution including device initialization, firmware update , factory defaulting, and setting Network information

Prerequisites

  • DHI-NVR5216-16P-I powered and connected to network
  • Latest firmware for NVR (see below)

Temperature Monitoring Solution Firmware

NVR Model Firmware
DHI-NVR5216-16P-I

Video Instructions

Step by Step Instructions

Device Initialization

Confirm/Upgrade NVR Firmware

Factory Default

Resetting the device to Factory Default is recommended after upgrading the Firmware.

Edit Network (TCP/IP) Information

Change the recorder from the default IP - 192.168.1.108 - and edit Full Network information for the NVR