Difference between revisions of "Thermal/Temperature Monitoring/Initial NVR Setup"

(Step by Step Instructions)
(Description)
 
(2 intermediate revisions by the same user not shown)
Line 2: Line 2:
 
__NOTOC__
 
__NOTOC__
 
==Description==
 
==Description==
This guide will cover the initial NVR Setup for the [[Thermal/Temperature Monitoring|Thermal Temperature Monitoring Solution]] including device initialization, firmware update , factory defaulting, and settign Network information
+
This guide will cover the initial NVR Setup for the [[Thermal/Temperature Monitoring|Thermal Temperature Monitoring Solution]] including device initialization, firmware update , factory defaulting, and setting Network information
  
 
==Prerequisites==
 
==Prerequisites==
Line 60: Line 60:
  
 
===Edit Network (TCP/IP) Information===
 
===Edit Network (TCP/IP) Information===
'''''Change the recorder from the default IP - 192.168.1.108'''''
+
'''''Change the recorder from the default IP - 192.168.1.108 - and edit Full Network information for the NVR'''''  
 
<gallery>
 
<gallery>
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_24.jpg|Enter the IP address of the NVR - default 192.168.1.108 in Internet Explorer on a local computer
+
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_24.jpg|Click '''Management''' > '''Network'''
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_25.jpg|Select the Region, Language and Video Standard. Click '''Next'''
+
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_25.jpg|Click TCP/IP. Click the Pencil icon under '''Edit'''
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_26.jpg|Scroll down to review the agreement and check to confirm.
+
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_26.jpg|Select Static or DHCP for Network mode
 
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_27.jpg|Click '''Next'''
 
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_27.jpg|Click '''Next'''
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_28.jpg|Select the Time Zone and confirm the System Time. Click '''Next'''
+
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_28.jpg|Enter Network information. Click '''OK'''
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_29.jpg|Create a password for the device and enter twice to confirm. Click '''Next'''
+
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_29.jpg|Click '''OK'''  
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_30.jpg|Select which Password Protection feature(s) you wish to enable. Click '''OK'''
+
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_30.jpg|A prompt will confirm the IP Address change
 
</gallery>
 
</gallery>

Latest revision as of 23:03, 5 May 2020

Temperature Monitoring Solution Initial NVR Setup

Description

This guide will cover the initial NVR Setup for the Thermal Temperature Monitoring Solution including device initialization, firmware update , factory defaulting, and setting Network information

Prerequisites

  • DHI-NVR5216-16P-I powered and connected to network
  • Latest firmware for NVR (see below)

Temperature Monitoring Solution Firmware

NVR Model Firmware
DHI-NVR5216-16P-I

Video Instructions

Step by Step Instructions

Device Initialization

Confirm/Upgrade NVR Firmware

Factory Default

Resetting the device to Factory Default is recommended after upgrading the Firmware.

Edit Network (TCP/IP) Information

Change the recorder from the default IP - 192.168.1.108 - and edit Full Network information for the NVR