Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/Temperature Monitoring/Initial NVR Setup"
(→Edit Network (TCP/IP) Information) |
(→Description) |
||
Line 2: | Line 2: | ||
__NOTOC__ | __NOTOC__ | ||
==Description== | ==Description== | ||
− | This guide will cover the initial NVR Setup for the [[Thermal/Temperature Monitoring|Thermal Temperature Monitoring Solution]] including device initialization, firmware update , factory defaulting, and | + | This guide will cover the initial NVR Setup for the [[Thermal/Temperature Monitoring|Thermal Temperature Monitoring Solution]] including device initialization, firmware update , factory defaulting, and setting Network information |
==Prerequisites== | ==Prerequisites== |
Latest revision as of 23:03, 5 May 2020
Temperature Monitoring Solution Initial NVR Setup
Description
This guide will cover the initial NVR Setup for the Thermal Temperature Monitoring Solution including device initialization, firmware update , factory defaulting, and setting Network information
Prerequisites
- DHI-NVR5216-16P-I powered and connected to network
- Latest firmware for NVR (see below)
Temperature Monitoring Solution Firmware
NVR Model | Firmware |
---|---|
DHI-NVR5216-16P-I | |
Video Instructions
Step by Step Instructions
Device Initialization
Confirm/Upgrade NVR Firmware
Factory Default
Resetting the device to Factory Default is recommended after upgrading the Firmware.
Edit Network (TCP/IP) Information
Change the recorder from the default IP - 192.168.1.108 - and edit Full Network information for the NVR