Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/Temperature Monitoring/3rd Party VMS/Milestone/Setup Camera"
(→Prerequisites) |
|||
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | = | + | =Setup and Configure Camera= |
==Description== | ==Description== | ||
This guide will show how to initialize and configure the Dahua Thermal camera in preparation for use with Milestone | This guide will show how to initialize and configure the Dahua Thermal camera in preparation for use with Milestone | ||
==Prerequisites== | ==Prerequisites== | ||
− | * Dahua Thermal camera | + | * Dahua Thermal camera powered on and connected to network |
==Step by Step Instructions== | ==Step by Step Instructions== | ||
===Initialize Camera=== | ===Initialize Camera=== | ||
+ | Please reference this guide for initial setup of the Thermal camera: | ||
+ | |||
+ | [[Thermal/Temperature Monitoring/Stand Alone Camera Setup|Stand Alone Thermal Camera Initial Setup]] | ||
===Configure Camera=== | ===Configure Camera=== | ||
1. Log into the Web interface of the camera | 1. Log into the Web interface of the camera | ||
+ | |||
+ | Click '''Setting''' | ||
+ | |||
+ | |||
+ | 2. Click '''Smart Thermal''' > '''Smart Plan''' | ||
+ | |||
+ | Click to enable the Thermal Temperature Monitoring and click '''Save''' | ||
+ | |||
+ | [[File:Thermal_Temperature_Monitoring_-_Milestone_-_Camera_Configuration_-_1.jpg|800px]] | ||
+ | |||
+ | 3. Click '''Thermal Temperature''' > '''Thermal Temperature Monitoring''' | ||
+ | |||
+ | * Check the box to enable | ||
+ | * Check the box to enable '''High Temperature Warning''' | ||
+ | |||
+ | Note: If you select 'Temperature report' , we will get all alarm notifications when camera detects any body temperature, no matter if it's higher or lower | ||
+ | |||
+ | * Check '''Snapshot''' | ||
+ | * Click '''Save''' | ||
+ | |||
+ | [[File:Thermal_Temperature_Monitoring_-_Milestone_-_Camera_Configuration_-_2.jpg|800px]] | ||
+ | |||
+ | 4. Click Smart Thermal > Smart Channel | ||
+ | |||
+ | Click to enable '''Crop Images''' | ||
+ | |||
+ | Click '''Save''' | ||
+ | |||
+ | [[File:Thermal_Temperature_Monitoring_-_Milestone_-_Camera_Configuration_-_3.jpg|800px]] |
Latest revision as of 23:29, 14 May 2020
Contents
Setup and Configure Camera
Description
This guide will show how to initialize and configure the Dahua Thermal camera in preparation for use with Milestone
Prerequisites
- Dahua Thermal camera powered on and connected to network
Step by Step Instructions
Initialize Camera
Please reference this guide for initial setup of the Thermal camera:
Stand Alone Thermal Camera Initial Setup
Configure Camera
1. Log into the Web interface of the camera
Click Setting
2. Click Smart Thermal > Smart Plan
Click to enable the Thermal Temperature Monitoring and click Save
3. Click Thermal Temperature > Thermal Temperature Monitoring
- Check the box to enable
- Check the box to enable High Temperature Warning
Note: If you select 'Temperature report' , we will get all alarm notifications when camera detects any body temperature, no matter if it's higher or lower
- Check Snapshot
- Click Save
4. Click Smart Thermal > Smart Channel
Click to enable Crop Images
Click Save