Difference between revisions of "Template:DHI ASI7213X T1 WebUI Firmware Update"

(Created page with "==Description== ==Prerequisites== ==Video Instructions== <embedvideo service="youtube">https://youtu.be/xxx</embedvideo> ==Step by Step Instructions== 1. Enable "File name ex...")
 
 
(18 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
==Description==
+
=Update Firmware via WebUI=
 +
 
 
==Prerequisites==
 
==Prerequisites==
 +
*DHI-ASI7213X-T1
 +
*LAN Access from a Windows PC
 +
*Internet Explorer or Chrome
 +
 
==Video Instructions==
 
==Video Instructions==
−
<embedvideo service="youtube">https://youtu.be/xxx</embedvideo>
+
<embedvideo service="youtube">https://www.youtube.com/watch?v=RH19tSJg7KI</embedvideo>
  
 
==Step by Step Instructions==
 
==Step by Step Instructions==
−
1. Enable "File name extensions" on File Explorer and rename the MCU file to "update.bin"
+
Download the firmware files for the device (3 in total):
 +
 
 +
 
 +
1. Log into the webUI of the device by typing the IP address into Internet Explorer
 +
 
 +
[[File:Dahua_Thermal_Solution_DHI_ASI7213X_T1_WebUI_Update_Firmware_-_1.jpg|700px]]
 +
 
 +
2. Click '''Upgrade'''
 +
 
 +
[[File:Dahua_Thermal_Solution_DHI_ASI7213X_T1_WebUI_Update_Firmware_-_2.jpg|700px]]
 +
 
 +
3. Click '''Browse'''
  
−
[[File:image_(3).png]]
+
[[File:Dahua_Thermal_Solution_DHI_ASI7213X_T1_WebUI_Update_Firmware_-_3.jpg|700px]]
  
−
2. Login on the access control monitor.
+
4. Select the firmware file, click Open
  
−
[[File:DSC_0072.JPG|400px]]
+
[[File:Dahua_Thermal_Solution_DHI_ASI7213X_T1_WebUI_Update_Firmware_-_4.jpg|700px]]
−
[[File:DSC_0073.JPG|400px]]
 
  
−
3. Tap "USB".
+
5. Click '''Upgrade'''
  
−
[[File:DSC_0074.JPG|400px]]
+
[[File:Dahua_Thermal_Solution_DHI_ASI7213X_T1_WebUI_Update_Firmware_-_5.jpg|700px]]
  
−
4. Tap "USB Update".
+
A prompt will appear showing the status of the update:
  
−
[[File:DSC_0076.JPG|400px]]
+
[[File:Dahua_Thermal_Solution_DHI_ASI7213X_T1_WebUI_Update_Firmware_-_6.jpg|700px]]
  
−
5. Confirm with the update.
+
A message will confirm a successful upgrade and the unit will reboot
 +
 +
[[File:Dahua_Thermal_Solution_DHI_ASI7213X_T1_WebUI_Update_Firmware_-_7.jpg|700px]]
  
−
[[File:DSC_0077.JPG|400px]]
+
'''Repeat the process for all required firmware files
 +
'''
  
−
6. Wait for the update to finish, don't power off the device at this screen!
+
==Troubleshooting==
  
−
[[File:DSC_0078.JPG|400px]]
+
In the event the MCU firmware update fails:  
  
−
7. Wait for the update to finish, don't power off the device at this screen!
+
[[File:Firmware_Update_error.png|600px]]
  
−
[[File:DSC_0079.JPG|400px]]
+
* Power down unit
 +
* Reconnect/secure the module
 +
* Power device on
 +
* Attempt Firmware upgrade again
 +
* Make sure the module is properly connected, then attempt the firmware update again

Latest revision as of 18:47, 12 August 2020

Update Firmware via WebUI

Prerequisites

  • DHI-ASI7213X-T1
  • LAN Access from a Windows PC
  • Internet Explorer or Chrome

Video Instructions

Step by Step Instructions

Download the firmware files for the device (3 in total):


1. Log into the webUI of the device by typing the IP address into Internet Explorer

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 1.jpg

2. Click Upgrade

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 2.jpg

3. Click Browse

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 3.jpg

4. Select the firmware file, click Open

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 4.jpg

5. Click Upgrade

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 5.jpg

A prompt will appear showing the status of the update:

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 6.jpg

A message will confirm a successful upgrade and the unit will reboot

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 7.jpg

Repeat the process for all required firmware files

Troubleshooting

In the event the MCU firmware update fails:

Firmware Update error.png

  • Power down unit
  • Reconnect/secure the module
  • Power device on
  • Attempt Firmware upgrade again
  • Make sure the module is properly connected, then attempt the firmware update again
Retrieved from "https://DahuaWiki.com/index.php?title=Template:DHI_ASI7213X_T1_WebUI_Firmware_Update&oldid=66335"