Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions/Alarm Input and Output"

(→‎Normal Body Temperature Indication Light)
 
(47 intermediate revisions by 3 users not shown)
Line 2: Line 2:
 
[[file:DHI-ASI7213X-T1_Cable_Connections.png|thumb|Cable Connections]]
 
[[file:DHI-ASI7213X-T1_Cable_Connections.png|thumb|Cable Connections]]
 
[[file:DHI-ASI7213X-T1_Physical_Setup.png|thumb|Physical Setup]]
 
[[file:DHI-ASI7213X-T1_Physical_Setup.png|thumb|Physical Setup]]
 +
 +
 +
{| class="wikitable"
 +
! style="text-align:center;"|[https://dahuawiki.com/index.php?action=ajax&title=-&rs=SecureFileStore::getFile&f=/c/c7/DHI-ASI7213X-T1_Contacts_Print_Sheet.xlsx <ul class="fa-ul"><li><i class="fas fa-file-pdf fa-4x" style="color:darkred;></i></li></ul>]DHI-ASI7213X-T1 Contacts Reference Sheet
 +
|}
 +
 
==Web Interface==
 
==Web Interface==
 
<gallery>
 
<gallery>
Line 10: Line 16:
  
 
==Cable Connections==
 
==Cable Connections==
−
*Alarm1 = Normal
+
*Alarm1 = High Temp
−
*Alarm2 = High Temp
+
*Alarm2 = Normal Temp or No Mask
−
*No alert for mask or face detection currently.  
+
*No alert for face detection currently.  
  
 
===Contact 1===
 
===Contact 1===
Line 132: Line 138:
 
|-
 
|-
 
|rowspan="9"|CON3
 
|rowspan="9"|CON3
−
|-
 
−
|Black and red
 
−
|[[File:Wire_black_red_stripe.svg|35px]]
 
−
|RX
 
−
|RS-232 receiving port.
 
−
|-
 
−
|Black and orange
 
−
|[[File:Wire_black_orange_stripe.svg|35px]]
 
−
|TX
 
−
|RS-232 sending port.
 
 
|-
 
|-
 
|Black and blue
 
|Black and blue
Line 173: Line 169:
 
|Lock control normally closed port.
 
|Lock control normally closed port.
 
|}
 
|}
−
==Normal Body Temperature Indication Light==
+
 
 +
==Alarm Outputs 1 and 2 - New Firmware==
 +
 
 +
{| class="wikitable"
 +
|-
 +
!|PLEASE NOTE: These instructions are for Alarm Outputs 1 and 2 on firmware version 1.000.10BE001.0.R.200722 and later
 +
|-
 +
|}
 +
 
 +
===High Body Temperature Indication Light===
 +
[[File:High Temp Alarm Setup-newfw.png|700px|right]]
 
{| class="wikitable"
 
{| class="wikitable"
 
!|Port
 
!|Port
Line 193: Line 199:
 
|ALARM1_COM
 
|ALARM1_COM
 
|Alarm 1 common output port.
 
|Alarm 1 common output port.
 +
|-
 +
|}
 +
<br><br><br><br><br><br><br><br><br><br><br><br><br><br>
 +
 +
===Normal Body Temperature or No Mask Indication Light===
 +
{| class="wikitable"
 +
|-
 +
!|PLEASE NOTE: On firmware version 1.000.10BE001.0.R.200722 and later, you must set the Alarm Output 2 mode setting to either "Normal Temperature Alarm" for being triggered when a normal temperature is detected or "No Mask Alarm" for being triggered when no mask is detected
 +
|-
 +
|[[File:ThermalKioskAlarmOutput2.PNG|600px|center]]
 +
|-
 +
|}
 +
 +
[[File:Normal Temp alarm Setup-newfw.png|700px|right]]
 +
{| class="wikitable"
 +
!|Port
 +
!colspan="2"|Cable Color
 +
!|Cable Name
 +
!|Description
 +
|-
 +
|+CON2
 +
|-
 +
|rowspan="9"|CON2
 
|-
 
|-
 
|White and blue
 
|White and blue
Line 203: Line 232:
 
|ALARM2_COM
 
|ALARM2_COM
 
|Alarm 2 common output port.
 
|Alarm 2 common output port.
 +
|}
 +
<br><br><br><br><br><br><br><br><br><br><br><br><br><br>
 +
 +
==Alarm Outputs 1 and 2 - Old Firmware==
 +
{| class="wikitable"
 
|-
 
|-
−
|White and green
+
!|PLEASE NOTE: These instructions are for Alarm Outputs 1 and 2 on firmware older than version 1.000.10BE001.0.R.200722
−
|[[File:Wire_white_green_stripe.svg|35px]]
+
|-
 +
|}
 +
 
 +
===High Body Temperature Indication Light===
 +
[[File:High Temp Alarm Setup.png |700px|right]]
 +
{| class="wikitable"
 +
!|Port
 +
!colspan="2"|Cable Color
 +
!|Cable Name
 +
!|Description
 +
|-
 +
|+CON2
 +
|-
 +
|rowspan="9"|CON2
 +
|-
 +
|White and blue
 +
|[[File:Wire_white_blue_stripe.svg|35px]]
 +
|ALARM2_NO
 +
|Alarm 2 normally open output port.
 +
|-
 +
|White and gray
 +
|[[File:Wire_white_gray_stripe.svg|35px]]
 +
|ALARM2_COM
 +
|Alarm 2 common output port.
 +
|}
 +
<embedvideo service="youtube">https://youtu.be/5gC_ptUkYD8</embedvideo>
 +
 
 +
===Normal Body Temperature Indication Light===
 +
[[File:Normal Temp alarm Setup.png|700px|right]]
 +
{| class="wikitable"
 +
!|Port
 +
!colspan="2"|Cable Color
 +
!|Cable Name
 +
!|Description
 +
|-
 +
|+CON2
 +
|-
 +
|rowspan="9"|CON2
 +
|-
 +
|White and red
 +
|[[File:Wire_white_red_stripe.svg|35px]]
 +
|ALARM1_NO
 +
|Alarm 1 normally open output port
 +
|-
 +
|White and orange
 +
|[[File:Wire_white_orange_stripe.svg|35px]]
 +
|ALARM1_COM
 +
|Alarm 1 common output port.
 +
|-
 +
|}
 +
<embedvideo service="youtube">https://youtu.be/5toY3dhp2fI</embedvideo>
 +
 
 +
==Door Strike Physical Setup==
 +
[[File:Door Strike Physical Setup.png|700px|right]]
 +
{| class="wikitable"
 +
!|Port
 +
!colspan="2"|Cable Color
 +
!|Cable Name
 +
!|Description
 +
|-
 +
|+CON3
 +
|-
 +
|rowspan="9"|CON3
 +
|-
 +
|Black and brown
 +
|[[File:Wire_black_brown_stripe.svg|35px]]
 +
|DOOR1_COM
 +
|Lock control common port.
 +
|-
 +
|Black and purple
 +
|[[File:Wire_black_purple_stripe.png|35px]]
 +
|DOOR1_NC
 +
|Lock control normally closed port.
 +
|}
 +
<embedvideo service="youtube">https://youtu.be/dGHAkGemMjs</embedvideo>
 +
 
 +
==Door Release Button Physical Setup==
 +
 
 +
[[File:Door Release Button Physical Setup.png|700px|right]]
 +
{| class="wikitable"
 +
!|Port
 +
!colspan="2"|Cable Color
 +
!|Cable Name
 +
!|Description
 +
|-
 +
|+CON3
 +
|-
 +
|rowspan="9"|CON3
 +
|-
 +
|Black and blue
 +
|[[File:Wire_black_blue_stripe.svg|35px]]
 
|GND
 
|GND
 
|Connected to the common GND port.
 
|Connected to the common GND port.
 
|-
 
|-
−
|White Brown
+
|Black and green
−
|[[File:Wire_white_brown_stripe.svg|35px]]
+
|[[File:Wire_black_green_stripe.svg|35px]]
−
|ALARM1
+
|PUSH1
−
|Alarm 1 input port.
+
|Door open button of door No.1
 +
|-
 +
|}
 +
<embedvideo service="youtube">https://youtu.be/dGHAkGemMjs</embedvideo>
 +
 
 +
==Card Reader:RS485==
 +
{| class="wikitable"
 +
!|Port
 +
!colspan="2"|Cable Color
 +
!|Cable Name
 +
!|Description
 +
|-
 +
|+CON1
 +
|-
 +
|rowspan="9"|CON1
 +
|-
 +
|Yellow
 +
|[[File:Wire_yellow.svg|35px]]
 +
|B
 +
|RS-485 negative electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
 +
*If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power.
 +
*Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid.
 +
|-
 +
|Purple
 +
|[[File:Wire_purple.png|35px]]
 +
|A
 +
|RS-485 positive electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
 +
*If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power.
 +
*Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid
 +
|}
 +
<gallery>
 +
file:DHI-ASI7213X-T1_Door_Config_DSS-Express.png|Door Config in DSS Express
 +
</gallery>
 +
 
 +
==Card Reader:Wiegand==
 +
{| class="wikitable"
 +
!|Port
 +
!colspan="2"|Cable Color
 +
!|Cable Name
 +
!|Description
 +
|-
 +
|+CON1
 +
|-
 +
|rowspan="9"|CON1
 +
|-
 +
|White
 +
|[[File:Wire_white.svg|35px]]
 +
|D1
 +
|Wiegand D1 input (connected to external card reader)/output (connected to controller).
 
|-
 
|-
−
|White and yellow
+
|Green
−
|[[File:Wire_white_yellow_stripe.svg|35px]]
+
|[[File:Wire_green.svg|35px]]
−
|GND
+
|D0
−
|Connected to the common GND port.
+
|Wiegand D0 input (connected to external card reader)/output (connected to controller).
 
|-
 
|-
−
|White and purple
 
−
|[[file:Wire_white_purple_stripe.png|35px]]
 
−
|ALARM2
 
−
|Alarm 2 input port.
 
 
|}
 
|}
  
−
==High Body Temperature Indication Light==
+
==WebUI Alarm Setup==
 +
<embedvideo service="youtube">https://youtu.be/vjfoiNMyOB8</embedvideo>
 +
==SystemUI Set Temperature Threshold==
 +
<embedvideo service="youtube">https://youtu.be/ZjVNCdwMB0I</embedvideo>
  
−
==Door Strike and Door Release Button Physical Setup==
+
==Notes==
 +
*Access Link Enable is only used when a door is configured for access for normal temperature. If the Kiosk is only used for LED lights, this option shouldn't be enabled.

Latest revision as of 15:44, 9 July 2021

Alarm Input and Output

Cable Connections
Physical Setup


DHI-ASI7213X-T1 Contacts Reference Sheet

Web Interface

  • Alarm Linkage

  • Alarm Linkage Log

  • Alarm Linkage-Modify

Cable Connections

  • Alarm1 = High Temp
  • Alarm2 = Normal Temp or No Mask
  • No alert for face detection currently.

Contact 1

Port Cable Color Cable Name Description
CON1
CON1
Black Wire black.svg RD– Negative electrode of external card reader.
Red Wire red.svg RD+ Positive electrode of external card reader.
Blue Wire blue.svg CASE Tamper alarm input of the external card reader.
White Wire white.svg D1 Wiegand D1 input (connected to external card reader)/output (connected to controller).
Green Wire green.svg D0 Wiegand D0 input (connected to external card reader)/output (connected to controller).
Brown Wire brown.svg LED Connected to external reader indicator in
Yellow Wire yellow.svg B RS-485 negative electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
  • If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power.
  • Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid.
Purple Wire purple.png A RS-485 positive electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
  • If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power.
  • Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid

Contact 2

Port Cable Color Cable Name Description
CON2
CON2
White and red Wire white red stripe.svg ALARM1_NO Alarm 1 normally open output port
White and orange Wire white orange stripe.svg ALARM1_COM Alarm 1 common output port.
White and blue Wire white blue stripe.svg ALARM2_NO Alarm 2 normally open output port.
White and gray Wire white gray stripe.svg ALARM2_COM Alarm 2 common output port.
White and green Wire white green stripe.svg GND Connected to the common GND port.
White Brown Wire white brown stripe.svg ALARM1 Alarm 1 input port.
White and yellow Wire white yellow stripe.svg GND Connected to the common GND port.
White and purple Wire white purple stripe.png ALARM2 Alarm 2 input port.

Contact 3

Port Cable Color Cable Name Description
CON3
CON3
Black and blue Wire black blue stripe.svg GND Connected to the common GND port.
Black and gray Wire black gray stripe.svg SR1 Used for door contact detection.
Black and green Wire black green stripe.svg PUSH1 Door open button of door No.1
Black and brown Wire black brown stripe.svg DOOR1_COM Lock control common port.
Black and yellow Wire black yellow stripe.svg DOOR1_NO Lock control normally open port.
Black and purple Wire black purple stripe.png DOOR1_NC Lock control normally closed port.

Alarm Outputs 1 and 2 - New Firmware

PLEASE NOTE: These instructions are for Alarm Outputs 1 and 2 on firmware version 1.000.10BE001.0.R.200722 and later

High Body Temperature Indication Light

High Temp Alarm Setup-newfw.png
Port Cable Color Cable Name Description
CON2
CON2
White and red Wire white red stripe.svg ALARM1_NO Alarm 1 normally open output port
White and orange Wire white orange stripe.svg ALARM1_COM Alarm 1 common output port.















Normal Body Temperature or No Mask Indication Light

PLEASE NOTE: On firmware version 1.000.10BE001.0.R.200722 and later, you must set the Alarm Output 2 mode setting to either "Normal Temperature Alarm" for being triggered when a normal temperature is detected or "No Mask Alarm" for being triggered when no mask is detected
ThermalKioskAlarmOutput2.PNG
Normal Temp alarm Setup-newfw.png
Port Cable Color Cable Name Description
CON2
CON2
White and blue Wire white blue stripe.svg ALARM2_NO Alarm 2 normally open output port.
White and gray Wire white gray stripe.svg ALARM2_COM Alarm 2 common output port.















Alarm Outputs 1 and 2 - Old Firmware

PLEASE NOTE: These instructions are for Alarm Outputs 1 and 2 on firmware older than version 1.000.10BE001.0.R.200722

High Body Temperature Indication Light

High Temp Alarm Setup.png
Port Cable Color Cable Name Description
CON2
CON2
White and blue Wire white blue stripe.svg ALARM2_NO Alarm 2 normally open output port.
White and gray Wire white gray stripe.svg ALARM2_COM Alarm 2 common output port.

Normal Body Temperature Indication Light

Normal Temp alarm Setup.png
Port Cable Color Cable Name Description
CON2
CON2
White and red Wire white red stripe.svg ALARM1_NO Alarm 1 normally open output port
White and orange Wire white orange stripe.svg ALARM1_COM Alarm 1 common output port.

Door Strike Physical Setup

Door Strike Physical Setup.png
Port Cable Color Cable Name Description
CON3
CON3
Black and brown Wire black brown stripe.svg DOOR1_COM Lock control common port.
Black and purple Wire black purple stripe.png DOOR1_NC Lock control normally closed port.

Door Release Button Physical Setup

Door Release Button Physical Setup.png
Port Cable Color Cable Name Description
CON3
CON3
Black and blue Wire black blue stripe.svg GND Connected to the common GND port.
Black and green Wire black green stripe.svg PUSH1 Door open button of door No.1

Card Reader:RS485

Port Cable Color Cable Name Description
CON1
CON1
Yellow Wire yellow.svg B RS-485 negative electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
  • If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power.
  • Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid.
Purple Wire purple.png A RS-485 positive electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
  • If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power.
  • Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid

  • Door Config in DSS Express

Card Reader:Wiegand

Port Cable Color Cable Name Description
CON1
CON1
White Wire white.svg D1 Wiegand D1 input (connected to external card reader)/output (connected to controller).
Green Wire green.svg D0 Wiegand D0 input (connected to external card reader)/output (connected to controller).

WebUI Alarm Setup

SystemUI Set Temperature Threshold

Notes

  • Access Link Enable is only used when a door is configured for access for normal temperature. If the Kiosk is only used for LED lights, this option shouldn't be enabled.
Retrieved from "https://DahuaWiki.com/index.php?title=Thermal/DHI-ASI7213X-T1/Instructions/Alarm_Input_and_Output&oldid=73809"