Difference between revisions of "Template:DHI ASI7213X T1 WebUI Firmware Update"

 
(2 intermediate revisions by the same user not shown)
Line 54: Line 54:
 
* Power device on
 
* Power device on
 
* Attempt Firmware upgrade again
 
* Attempt Firmware upgrade again
 +
* Make sure the module is properly connected, then attempt the firmware update again

Latest revision as of 18:47, 12 August 2020

Update Firmware via WebUI

Prerequisites

  • DHI-ASI7213X-T1
  • LAN Access from a Windows PC
  • Internet Explorer or Chrome

Video Instructions

Step by Step Instructions

Download the firmware files for the device (3 in total):


1. Log into the webUI of the device by typing the IP address into Internet Explorer

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 1.jpg

2. Click Upgrade

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 2.jpg

3. Click Browse

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 3.jpg

4. Select the firmware file, click Open

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 4.jpg

5. Click Upgrade

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 5.jpg

A prompt will appear showing the status of the update:

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 6.jpg

A message will confirm a successful upgrade and the unit will reboot

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 7.jpg

Repeat the process for all required firmware files

Troubleshooting

In the event the MCU firmware update fails:

Firmware Update error.png

  • Power down unit
  • Reconnect/secure the module
  • Power device on
  • Attempt Firmware upgrade again
  • Make sure the module is properly connected, then attempt the firmware update again