Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Difference between revisions of "Template:DHI ASI7213X T1 WebUI Firmware Update"

 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
==Update Firmware via WebUI==
+
=Update Firmware via WebUI=
  
 
==Prerequisites==
 
==Prerequisites==
Line 54: Line 54:
 
* Power device on
 
* Power device on
 
* Attempt Firmware upgrade again
 
* Attempt Firmware upgrade again
 +
* Make sure the module is properly connected, then attempt the firmware update again

Latest revision as of 18:47, 12 August 2020

Update Firmware via WebUI

Prerequisites

  • DHI-ASI7213X-T1
  • LAN Access from a Windows PC
  • Internet Explorer or Chrome

Video Instructions

Step by Step Instructions

Download the firmware files for the device (3 in total):


1. Log into the webUI of the device by typing the IP address into Internet Explorer

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 1.jpg

2. Click Upgrade

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 2.jpg

3. Click Browse

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 3.jpg

4. Select the firmware file, click Open

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 4.jpg

5. Click Upgrade

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 5.jpg

A prompt will appear showing the status of the update:

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 6.jpg

A message will confirm a successful upgrade and the unit will reboot

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 7.jpg

Repeat the process for all required firmware files

Troubleshooting

In the event the MCU firmware update fails:

Firmware Update error.png

  • Power down unit
  • Reconnect/secure the module
  • Power device on
  • Attempt Firmware upgrade again
  • Make sure the module is properly connected, then attempt the firmware update again