Difference between revisions of "Thermal/DH-TPC-HT2201/Instructions/Capture Snapshots Videos"
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
=How to Capture Snapshots and Videos= | =How to Capture Snapshots and Videos= | ||
==Description== | ==Description== | ||
| − | + | This article covers how to take snapshots and videos on a DH-TPC-HT2201 | |
==Prerequisites== | ==Prerequisites== | ||
| − | * | + | * DH-TPC-HT2201 |
| + | * A micro SD Card installed and formatted | ||
| + | '''Micro SD Card MUST be Micro SD HC. Micro SD XC is not compatible.''' | ||
==Video Instructions== | ==Video Instructions== | ||
| − | <embedvideo service="youtube">https:// | + | <embedvideo service="youtube">https://youtu.be/s7ZPM3OGZVA</embedvideo> |
==Step by Step Instructions== | ==Step by Step Instructions== | ||
| − | 1 . [ | + | 1. To take a snapshot on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 2 times |
| + | |||
| + | [[File:DH-TPC-HT2201_SnapshotsVideo1.PNG|400px]] | ||
| + | |||
| + | 2. If you successfully took a snapshot, you should see a message on the screen that says "Captured" with a check mark next to it. | ||
| + | <br>The snapshot will be accessible from the installed SD Card | ||
| + | |||
| + | [[File:DH-TPC-HT2201_SnapshotsVideo2.PNG|400px]] | ||
| + | |||
| + | 3. To take a video on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 3 times | ||
| + | |||
| + | [[File:DH-TPC-HT2201_SnapshotsVideo1.PNG|400px]] | ||
| + | |||
| + | 4. If you successfully started recording video, you should see a time counter at the bottom of the screen counting up | ||
| + | |||
| + | [[File:DH-TPC-HT2201_SnapshotsVideo3.PNG|400px]] | ||
| + | |||
| + | 5. When you are done recording video, pull the trigger 3 times to stop recording | ||
| + | |||
| + | [[File:DH-TPC-HT2201_SnapshotsVideo1.PNG|400px]] | ||
| + | |||
| + | 6. If you successfully stopped recording video, you should see a message on the screen that says "Recorded" with a check mark next to it. | ||
| + | <br>The recorded video will be accessible from the installed SD Card | ||
| + | |||
| + | [[File:DH-TPC-HT2201_SnapshotsVideo4.PNG|400px]] | ||
Latest revision as of 22:43, 30 September 2020
Contents
How to Capture Snapshots and Videos
Description
This article covers how to take snapshots and videos on a DH-TPC-HT2201
Prerequisites
- DH-TPC-HT2201
- A micro SD Card installed and formatted
Micro SD Card MUST be Micro SD HC. Micro SD XC is not compatible.
Video Instructions
Step by Step Instructions
1. To take a snapshot on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 2 times
2. If you successfully took a snapshot, you should see a message on the screen that says "Captured" with a check mark next to it.
The snapshot will be accessible from the installed SD Card
3. To take a video on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 3 times
4. If you successfully started recording video, you should see a time counter at the bottom of the screen counting up
5. When you are done recording video, pull the trigger 3 times to stop recording
6. If you successfully stopped recording video, you should see a message on the screen that says "Recorded" with a check mark next to it.
The recorded video will be accessible from the installed SD Card
