Difference between revisions of "Template:DMSS/Instructions/LincX2PRO PIR Setup"

(→‎Step by Step Instructions)
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
1. Launch the DMSS Mobile App.
 +
<br>Tap on '''Device''' at the bottom to access your added device list.
 +
<br>Select one of your added devices that you wish to setup/modify Floodlight Settings for. Tap on '''...''' .
  
−
==Step by Step Instructions==
+
[[File:LincX2ProPIRFloodlight1.png|400px]]
−
1. Launch DMSS Mobile App.
 
  
−
2. Tap on [[File:DMSS_Icon_Live_Home.png|30px]] '''Home''' to access your added device list.
+
2. Select '''Device Details'''
 +
 
 +
[[File:LincX2ProPIRFloodlight2.png|400px]]
 +
 
 +
3. Scroll down and select '''Floodlight Settings'''
 +
 
 +
[[File:LincX2ProPIRFloodlight3.png|400px]]
 +
 
 +
4. Tap on '''Select Mode'''
 +
 
 +
[[File:LincX2ProPIRFloodlight4.png|400px]]
  
−
3. Select one of your added device that you wish to setup/modify PIR Settings for. Tap on '''...''' icon.
+
5. Select '''PIR''' from the list.
 +
<br>Tap on '''OK'''
  
−
[[File:L26 C26 - Modify PIR Detection Zone - DMSS - 1.jpg|400px]]
+
[[File:LincX2ProPIRFloodlight5.png|400px]]
  
−
2. Select '''Device Details'''
+
6. Select '''Brightness'''
 +
 
 +
[[File:LincX2ProPIRFloodlight6.png|400px]]
 +
 
 +
7. Adjust the slider under '''Brightness Settings''' to the desired brightness level for the floodlight.
 +
<br>When you are done, select '''Save''' at the top
 +
 
 +
[[File:LincX2ProPIRFloodlight7.png|400px]]
  
−
[[File:L26 C26 - Modify PIR Detection Zone - DMSS - 2.jpg|400px]]
+
8. Select '''Color Temperature'''
  
−
3. Select Floodlight
+
[[File:LincX2ProPIRFloodlight8.png|400px]]
  
−
[[File:L26 C26 - Modify PIR Detection Zone - DMSS - 3.jpg|400px]]
+
9. Select '''Cool''' if you want a blue-ish color for the light or select '''Warm''' if you want a yellow-ish color for the light
  
−
4. Select PIR Region
+
[[File:LincX2ProPIRFloodlight9.png|400px]]
  
−
[[File:L26 C26 - Modify PIR Detection Zone - DMSS - 6.jpg|400px]]
+
10. Select '''PIR Region'''
  
−
5. Tap a Zone to disable/enable
+
[[File:LincX2ProPIRFloodlight10.png|400px]]
  
−
6. Use the slide to adjust the range of the Zones
+
11. Drag the slider on the left for the amount of distance you want the PIR to monitor. (100% = 10m [32.81 ft])
 +
<br>Tap the 3 zones either ON or OFF.
 +
<br>Select '''Save''' at the top
  
 +
[[File:LincX2ProPIRFloodlight11.png|800px]]
  
−
7. Press the Save icon in the top right to save settings
+
12. Select '''Light Duration'''
  
−
[[File:L26 C26 - Modify PIR Detection Zone - DMSS - 7.jpg|400px]]
+
[[File:LincX2ProPIRFloodlight12.png|400px]]
  
−
You can also adjust the '''Light on Time''' setting here
+
13. Select the duration the light will stay on once activated.
 +
<br>Tap on '''OK'''
  
−
[[File:L26 C26 - Modify PIR Detection Zone - DMSS - 8.jpg|400px]]
+
[[File:LincX2ProPIRFloodlight13.png|400px]]

Latest revision as of 21:54, 8 April 2024

1. Launch the DMSS Mobile App.
Tap on Device at the bottom to access your added device list.
Select one of your added devices that you wish to setup/modify Floodlight Settings for. Tap on ... .

LincX2ProPIRFloodlight1.png

2. Select Device Details

LincX2ProPIRFloodlight2.png

3. Scroll down and select Floodlight Settings

LincX2ProPIRFloodlight3.png

4. Tap on Select Mode

LincX2ProPIRFloodlight4.png

5. Select PIR from the list.
Tap on OK

LincX2ProPIRFloodlight5.png

6. Select Brightness

LincX2ProPIRFloodlight6.png

7. Adjust the slider under Brightness Settings to the desired brightness level for the floodlight.
When you are done, select Save at the top

LincX2ProPIRFloodlight7.png

8. Select Color Temperature

LincX2ProPIRFloodlight8.png

9. Select Cool if you want a blue-ish color for the light or select Warm if you want a yellow-ish color for the light

LincX2ProPIRFloodlight9.png

10. Select PIR Region

LincX2ProPIRFloodlight10.png

11. Drag the slider on the left for the amount of distance you want the PIR to monitor. (100% = 10m [32.81 ft])
Tap the 3 zones either ON or OFF.
Select Save at the top

LincX2ProPIRFloodlight11.png

12. Select Light Duration

LincX2ProPIRFloodlight12.png

13. Select the duration the light will stay on once activated.
Tap on OK

LincX2ProPIRFloodlight13.png

Retrieved from "https://DahuaWiki.com/index.php?title=Template:DMSS/Instructions/LincX2PRO_PIR_Setup&oldid=84295"