Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Troubleshoot/NVR/Errors Found In Log"
(→Boot Codes) |
|||
(One intermediate revision by the same user not shown) | |||
Line 10: | Line 10: | ||
*0x05: Bad track: The hard drive has a bad track. | *0x05: Bad track: The hard drive has a bad track. | ||
*0x06: Abnormal reboot, decoding abnormal | *0x06: Abnormal reboot, decoding abnormal | ||
+ | *0x06a: Video storage abnormal | ||
+ | *0x06F: Restart caused by illegal access to memory. Security feature reboot for backend failed access | ||
*0x07: Abnormal reboot, The configuration partition is damaged | *0x07: Abnormal reboot, The configuration partition is damaged | ||
*0x11: Hard disk hot-swap overtime | *0x11: Hard disk hot-swap overtime | ||
Line 20: | Line 22: | ||
*0x04: Check all of the camera connections and ensure they are powered correctly. | *0x04: Check all of the camera connections and ensure they are powered correctly. | ||
*0x05: Check in Settings>Storage>HDD Manage and look at the Status. If it is not "Normal", it is likely that there is a hard drive error and it needs to be replaced. | *0x05: Check in Settings>Storage>HDD Manage and look at the Status. If it is not "Normal", it is likely that there is a hard drive error and it needs to be replaced. | ||
− | + | *0x06: Do not decode over the system's capabilities. Check the system's datasheet | |
− | + | *0x06a: Could be an issue with the drive. Check the HDD's health with S.M.A.R.T or replace the drive. Make sure firmware is up to date | |
− | + | *0x06F: Too many devices connected at once. Change login credentials to limit device access. | |
+ | *0x07: Factory default the system | ||
+ | *0x11: Turn the system off and make sure the drive is properly connected. Or replace the drive. | ||
Latest revision as of 14:50, 11 July 2023
Errors Found in Log
Whenever the DVR reboots an entry is created in the Log, Information>Log. In the log the entry will list "Reboot with flags" or "Reboot Symbol". It will show a code telling you why the camera rebooted. Please see the list below:
Boot Codes
- 0x00: DVR has rebooted normally: routine maintenance reboot or a user reboot.
- 0x01: Abnormal reboot: power loss, system crash, or other undefined abnormality.
- 0x02: Log stuck.
- 0x03: Hard drive read-write slow: hard drive read-write speed has dropped significantly; hard drive capacity has seriously decreased.
- 0x04: Abnormal recording: Over 3 minutes with no stream on the recording channel.
- 0x05: Bad track: The hard drive has a bad track.
- 0x06: Abnormal reboot, decoding abnormal
- 0x06a: Video storage abnormal
- 0x06F: Restart caused by illegal access to memory. Security feature reboot for backend failed access
- 0x07: Abnormal reboot, The configuration partition is damaged
- 0x11: Hard disk hot-swap overtime
Troubleshooting the codes
- 0x00: Check in Settings>System>Auto Maintain to ensure that the DVR is not set to reboot.
- 0x01: This one is the hardest one to diagnose. We recommend updating the firmware to the most Recent version, hard resetting the DVR, and ensuring the DVR is receiving consistent power.
- 0x02: Clear the log. Go to Information>Log and click Clear.
- 0x03: Check in Settings>Storage>HDD Manage and look at the Status. If it is not "Normal", it is likely that there is a hard drive error and it needs to be replaced.
- 0x04: Check all of the camera connections and ensure they are powered correctly.
- 0x05: Check in Settings>Storage>HDD Manage and look at the Status. If it is not "Normal", it is likely that there is a hard drive error and it needs to be replaced.
- 0x06: Do not decode over the system's capabilities. Check the system's datasheet
- 0x06a: Could be an issue with the drive. Check the HDD's health with S.M.A.R.T or replace the drive. Make sure firmware is up to date
- 0x06F: Too many devices connected at once. Change login credentials to limit device access.
- 0x07: Factory default the system
- 0x11: Turn the system off and make sure the drive is properly connected. Or replace the drive.