Difference between revisions of "NVR/Playback/Playback Realtime"

 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==Setup Real-Time Play==
+
==Setup Real-Time Playback==
  
1. Login the system, and move the mouse to the top of any channels, no need click, it will show a toolbar as below:
+
===Description===
 +
Follow the instructions below to use and setup Real-Time Playback on your video recorder.
 +
===Prerequisites===
 +
* Video recorder with Hard Drive
 +
* Monitor, mouse, and camera attached
  
[[file:RealTimePlayback1.png|668px]]
+
===Video Instructions===
 +
<embedvideo service="youtube">https://youtu.be/67wUnu0xQQU</embedvideo>
  
2. Left-click the red frame portion of the button(this button is real-time play button), you can see that the channel replay the video which is the choose channel.
+
===Step by Step Instructions===
 +
1. Login the system, and move the mouse to the top of any channel, there is no need click as it will show a toolbar as below:
  
[[file:RealTimePlayback2.png|668px]]
+
[[File:Quickplayback003.jpg|668px]]
  
3. Real-time play could set playback time at Real-time play option under the GENERAL directory. And the maximum value is 60 min. You can see the red frame portion of the below two pictures.
+
2. Left-click the button, this button is real-time play button. You can see that the channel replay the video which is the choosen channel.
  
[[file:RealTimePlayback3.png|668px]]
+
[[File:Quickplayback004.jpg|668px]]
  
4. Right-click at any channels if you want to stop playback video. But when you replay the video dose not any other operation.
+
[[File:Quickplayback005.jpg|668px]]
  
[[file:RealTimePlayback4.png|668px]]
+
3. Right-click at any channels if you want to stop playback video, but when you replay the video dose not any other operation.
 +
 
 +
[[File:Quickplayback004.jpg|668px]]
 +
 
 +
4. To change the Real-time playback setting navigate to MAIN MENU -> SYSTEM -> GENERAL directory. The default value should only go back 10 min, but maximum value is 60 min.
 +
 
 +
[[File:Quickplayback007.jpg|668px]]
 +
 
 +
[[File:Quickplayback008.jpg|668px]]
 +
 
 +
[[File:Quickplayback001.jpg|668px]]
 +
 
 +
[[File:Quickplayback002.jpg|668px]]
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
[[Category:NVR]]
 +
[[Category:NVR Interface]]
 +
[[Category:Troubleshoot]]

Latest revision as of 00:44, 3 November 2020

Setup Real-Time Playback

Description

Follow the instructions below to use and setup Real-Time Playback on your video recorder.

Prerequisites

  • Video recorder with Hard Drive
  • Monitor, mouse, and camera attached

Video Instructions

Step by Step Instructions

1. Login the system, and move the mouse to the top of any channel, there is no need click as it will show a toolbar as below:

Quickplayback003.jpg

2. Left-click the button, this button is real-time play button. You can see that the channel replay the video which is the choosen channel.

Quickplayback004.jpg

Quickplayback005.jpg

3. Right-click at any channels if you want to stop playback video, but when you replay the video dose not any other operation.

Quickplayback004.jpg

4. To change the Real-time playback setting navigate to MAIN MENU -> SYSTEM -> GENERAL directory. The default value should only go back 10 min, but maximum value is 60 min.

Quickplayback007.jpg

Quickplayback008.jpg

Quickplayback001.jpg

Quickplayback002.jpg