Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Alarm Center"
(→Alarm Center) |
|||
(6 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
==Alarm Center== | ==Alarm Center== | ||
+ | '''Please Note:''' This interface is reserved for you to develop. System can upload alarm signal to the alarm center when local alarm occurs. Before you use alarm center, please set server IP, port and etc. When an alarm occurs, system can send out data as the protocol defined, so the client-end can get the data. | ||
− | |||
− | Step | + | Step 1. From Main Menu Select Select ➞ Network ➞ Alarm Center |
+ | |||
+ | [[File:alarm_center_wiki1.png|500px]] | ||
+ | |||
+ | |||
+ | Step 2. Select Enable ➞ Select Protocol Type ➞ Input Host IP and Port ➞ Input Self Report time ➞ Select Save. | ||
+ | |||
+ | [[File:alarm_center_wiki2.png|500px]] | ||
+ | |||
+ | |||
+ | [[Category: Alarm]] |
Latest revision as of 17:49, 28 June 2016
Alarm Center
Please Note: This interface is reserved for you to develop. System can upload alarm signal to the alarm center when local alarm occurs. Before you use alarm center, please set server IP, port and etc. When an alarm occurs, system can send out data as the protocol defined, so the client-end can get the data.
Step 1. From Main Menu Select Select ➞ Network ➞ Alarm Center
Step 2. Select Enable ➞ Select Protocol Type ➞ Input Host IP and Port ➞ Input Self Report time ➞ Select Save.