Difference between revisions of "NVR/Basic Setup/Video Matrix and Spot Out"
(Created page with "==Video Matrix and Spot Out==") |
(→Video Matrix and Spot Out) |
||
Line 1: | Line 1: | ||
==Video Matrix and Spot Out== | ==Video Matrix and Spot Out== | ||
+ | This is a How To Guide for the following Models:<br />HCVR72A16A-S3, HCVR72A08-S3, HCVR52A16A-S3, HCVR52A16AN-S3 | ||
+ | |||
+ | |||
+ | To make this feature work you will need to do the following: | ||
+ | |||
+ | |||
+ | # Go to the Main Menu click on System in the Setting Section. | ||
+ | # On the Left side, click on Display. | ||
+ | # In the first tab click on the box for the Video Matrix. | ||
+ | # A drop down menu will appear, select either VGA or HDMI Output. | ||
+ | ## Once Selected, click on Apply | ||
+ | ## Then click on Save | ||
+ | ## Your system may reboot, please let it do so. | ||
+ | # now when it comes back up you will need to go back to the Main Menu and click on System in the Settings section. | ||
+ | # On the left column click on the video Matrix. | ||
+ | # In Video Matrix click enable, and select the cameras that you would like to appear in the "Spot Out" monitor. | ||
+ | # Click Apply and Save. | ||
+ | |||
+ | Now you will have a monitor that will have access to the Menu functions as well has a monitor for viewing access only. |
Revision as of 18:38, 25 May 2016
Video Matrix and Spot Out
This is a How To Guide for the following Models:
HCVR72A16A-S3, HCVR72A08-S3, HCVR52A16A-S3, HCVR52A16AN-S3
To make this feature work you will need to do the following:
- Go to the Main Menu click on System in the Setting Section.
- On the Left side, click on Display.
- In the first tab click on the box for the Video Matrix.
- A drop down menu will appear, select either VGA or HDMI Output.
- Once Selected, click on Apply
- Then click on Save
- Your system may reboot, please let it do so.
- now when it comes back up you will need to go back to the Main Menu and click on System in the Settings section.
- On the left column click on the video Matrix.
- In Video Matrix click enable, and select the cameras that you would like to appear in the "Spot Out" monitor.
- Click Apply and Save.
Now you will have a monitor that will have access to the Menu functions as well has a monitor for viewing access only.