Difference between revisions of "SmartPSS/Add Device P2P"
(→Pre-Requisites) |
|||
Line 1: | Line 1: | ||
==Setup Remote Access via P2P using SmartPSS== | ==Setup Remote Access via P2P using SmartPSS== | ||
===Pre-Requisites=== | ===Pre-Requisites=== | ||
− | + | * SN Number of device located on bottom of device recorder. Can also be located under system info from the recorder. | |
+ | |||
===Video Instructions=== | ===Video Instructions=== | ||
<embedvideo service="youtube">https://youtu.be/0BimUZRYjhI</embedvideo> | <embedvideo service="youtube">https://youtu.be/0BimUZRYjhI</embedvideo> |
Revision as of 16:21, 29 June 2016
Contents
[hide | ◄ ► ]Setup Remote Access via P2P using SmartPSS
Pre-Requisites
- SN Number of device located on bottom of device recorder. Can also be located under system info from the recorder.
Video Instructions
Step by Step Instructions
1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:
- On the underside or side of the unit
- In the web interface, under Info->Version
Error creating thumbnail: Unable to save thumbnail to destination
- On the system interface under Main Menu->Settings->Network->P2P
- On the system interface under Main Menu->Info->System->Version
2. Launch SmartPSS. (Default SmartPSS credentials are admin:admin)
Error creating thumbnail: Unable to save thumbnail to destination
3. Click, "Devices"
4. Click, "Manual Add"
5. Input the following:
- Device Name:(Any Name)
- Register Mode: SN
- SN: (Your Device's Serial)
- Group Name: (Any Group)
- User Name: admin
- Password: admin (Your NVR's Password)
Error creating thumbnail: Unable to save thumbnail to destination
6. Click, "Get Info"
Error creating thumbnail: Unable to save thumbnail to destination
7. Click, "Save and Continue"
Error creating thumbnail: Unable to save thumbnail to destination
8. After a few moments, SmartPSS will connect to the NVR and display as, "Online"